PC won't boot into windows 10 after install on NVMe SSD

[JayFree]

Recently i bought a bunch of new PC parts to make a new build.

But when i put them together, i am able to get in the windows installer, but when the installer is done, it boots me back into the bios.

Steps i have taken before the post:

Tried to install with a USB made with media creation tool.

Tried to install with a USB made with Rufus with GPT partition scheme and UEFI (non CSM) target system

Tried to install with and without CSM on.

Put boot devices in UEFI only mode in the CSM menu.
 

The weird thing is as well, when i install windows on the 980 Pro 1tb, the BIOS doesnt recognise it as a boot device, but there is a windows install on the drive when i check it through Diskpart in a CMD window.

I am on the most recent non-Beta bios for my motherboard, that being version 1413 released on the 27th of april.

 

Included is a screenshot of the Rufus settings i used for the boot drive.

 

Full specs:

7800X3D
Asus B650E-F Gaming Wifi
16x2 GB Corsair Vengeance RGB 6000mt/s CL36
1TB Samsung 980 Pro (boot drive)
2TB Corsair MP600

RTX 3090 (from old build)

Corsair HX1000i

 

[Waqas409]

Ok try this.
unplug all your storage devices.
Only put the NVMe which has the Windows in it.

[JayFree]

7 minutes ago, Waqas409 said:

Ok try this.
unplug all your storage devices.
Only put the NVMe which has the Windows in it.

Ill give that a try!

[JayFree]

3 hours ago, Waqas409 said:

Ok try this.
unplug all your storage devices.
Only put the NVMe which has the Windows in it.

Thanks so much man! This ended up working!

[Waqas409]

2 hours ago, JayFree said:

Thanks so much man! This ended up working!

This is a standard issue when it comes to NVME for Boot drives.