Jump to content

Stock fans on the Corsair 275r airflow?

goldenburd
 Share
Posted (edited)
  • Author
3 minutes ago, WoodenMarker said:

The bios version wouldn't explain much more than what's mentioned on the motherboard website. I'm not sure if and when non-K oc was removed so you'll have to try setting an oc to see if it works. 

The NH-L9i should be plenty for cooling a stock 4690k. If you haven't tried undervolting, you should for lower power consumption and temps since there's no downside unless you undervolt so much that the system is unstable. 

It might need lapped idk if it picked up the gash. Dent from the cpu to? Or thermal paste wtf

16108444411738575508136521750814.jpg

Edited by goldenburd
Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, goldenburd said:

It might need lapped idk if it picked up the gash. Dent from the cpu to? Or thermal paste wtf

Some thermal paste is abrasive. It's probably fine. Thermal paste should fill the gaps. 

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
5 minutes ago, WoodenMarker said:

Some thermal paste is abrasive. It's probably fine. Thermal paste should fill the gaps. 

Im going to test fit without paste two of the fan mounts are blocked by the case...

16108450185687563467886806469056.jpg

16108450792907636502266288069813.jpg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, goldenburd said:

Im going to test fit without paste two of the fan mounts are blocked by the case...

That's probably because of the dense layout on an itx board. The cutout is mainly fit for atx boards. 

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted (edited)
  • Author
5 minutes ago, WoodenMarker said:

That's probably because of the dense layout on an itx board. The cutout is mainly fit for atx boards. 

I think i have to take it out🙄 my poor io shield( missing all grounding tabs) also this i5 seem legit(has hd graphic aswell)(theres thermal paste in the cpu socket....)? Im questioning everything because the guy i got this pc off scams people.16108455886224140598394985365674.thumb.jpg.03044567aabd548a77019d3c0b989304.jpg

Edited by goldenburd
More info
Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
26 minutes ago, WoodenMarker said:

That's probably because of the dense layout on an itx board. The cutout is mainly fit for atx boards. 

Uhhhhhh no mounting information how tf this fan is miss aligned aswell uhhh.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
34 minutes ago, goldenburd said:

I think i have to take it out🙄 my poor io shield( missing all grounding tabs) also this i5 seem legit(has hd graphic aswell)(theres thermal paste in the cpu socket....)? Im questioning everything because the guy i got this pc off scams people.

Cinebench scores are a good way to tell if the cpu is legit. 

12 minutes ago, goldenburd said:

Uhhhhhh no mounting information how tf this fan is miss aligned aswell uhhh.

Which fan? How's it misaligned?

44 minutes ago, goldenburd said:

two of the fan mounts are blocked by the case...

If you mean that you're having issues accessing the front fan mounts, you need to remove the front panel for that. You can pull it off by grabbing the opening at the bottom. 

15f1d0bc-5c24-47d3-b966-346715f4c542.png

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
5 minutes ago, WoodenMarker said:

Cinebench scores are a good way to tell if the cpu is legit. 

Which fan? How's it misaligned?

F--k. It crushing one of the parts 

16108476797834889213241647940127.jpg

16108477662991544954265629996399.jpg

1610847793886979988057941834132.jpg

20210116_204411.jpg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, goldenburd said:

F--k. It crushing one of the parts 

Have you tried rotating the cooler?

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted (edited)
  • Author
10 minutes ago, WoodenMarker said:

Have you tried rotating the cooler?

Bent some of parts it was in the correct position that it wasn't going to hit them. Look like caps. Might be a smart idea to sell this cooler and get a raised one. Damaged 12v pin to. I can get it to fit but idk if about the mount pressure dont want to risk damage.

1610848295622601860677466063100.jpg

1610848393462851400857784581690.jpg

Edited by goldenburd
Link to comment
Share on other sites
Link to post
Share on other sites
Posted
3 minutes ago, goldenburd said:

Bent some of parts it was in the correct position that it wasn't going to hit them. Look like caps. Might be a smart idea to sell this cooler and get a raised one

A better cooler wouldn't hurt but the NH-L9i shouldn't have any issues fitting. The cooler website doesn't list any potential issues on this motherboard and there aren't any issues mentioned here with the same combination: https://pcpartpicker.com/b/yf6scf

aac595af26904323c34fea51430f7b4b.png

If you really want to replace the cooler anyway, some decent options include:

Gammaxx 400: https://pcpartpicker.com/product/w3c48d/deepcool-gammaxx-400-blue-7434-cfm-cpu-cooler-deepcool-gammaxx-400-blue

SE-224-XT Basic: https://pcpartpicker.com/product/VTqBD3/id-cooling-se-224-xt-basic-7616-cfm-cpu-cooler-se-224-xt-basic

True Spirit 140 Direct: https://pcpartpicker.com/product/dmvZxr/thermalright-true-spirit-140-direct-736-cfm-cpu-cooler-true-spirit-140-direct

SE-234 ARGB: https://pcpartpicker.com/product/P7qBD3/id-cooling-se-234-argb-565-cfm-cpu-cooler-se-234-argb

 

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
3 minutes ago, WoodenMarker said:

A better cooler wouldn't hurt but the NH-L9i shouldn't have any issues fitting. The cooler website doesn't list any potential issues on this motherboard and there aren't any issues mentioned here with the same combination: https://pcpartpicker.com/b/yf6scf

aac595af26904323c34fea51430f7b4b.png

If you really want to replace the cooler anyway, some decent options include:

Gammaxx 400: https://pcpartpicker.com/product/w3c48d/deepcool-gammaxx-400-blue-7434-cfm-cpu-cooler-deepcool-gammaxx-400-blue

SE-224-XT Basic: https://pcpartpicker.com/product/VTqBD3/id-cooling-se-224-xt-basic-7616-cfm-cpu-cooler-se-224-xt-basic

True Spirit 140 Direct: https://pcpartpicker.com/product/dmvZxr/thermalright-true-spirit-140-direct-736-cfm-cpu-cooler-true-spirit-140-direct

SE-234 ARGB: https://pcpartpicker.com/product/P7qBD3/id-cooling-se-234-argb-565-cfm-cpu-cooler-se-234-argb

 

Ima hit back i don't really think i can do rgb because theres no rgb header i mean hd rgb is open but like bruh lol.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted (edited)
  • Author
24 minutes ago, goldenburd said:

Ima hit back i don't really think i can do rgb because theres no rgb header i mean hd rgb is open but like bruh lol.

 

30 minutes ago, WoodenMarker said:

A better cooler wouldn't hurt but the NH-L9i shouldn't have any issues fitting. The cooler website doesn't list any potential issues on this motherboard and there aren't any issues mentioned here with the same combination: https://pcpartpicker.com/b/yf6scf

aac595af26904323c34fea51430f7b4b.png

If you really want to replace the cooler anyway, some decent options include:

Gammaxx 400: https://pcpartpicker.com/product/w3c48d/deepcool-gammaxx-400-blue-7434-cfm-cpu-cooler-deepcool-gammaxx-400-blue

SE-224-XT Basic: https://pcpartpicker.com/product/VTqBD3/id-cooling-se-224-xt-basic-7616-cfm-cpu-cooler-se-224-xt-basic

True Spirit 140 Direct: https://pcpartpicker.com/product/dmvZxr/thermalright-true-spirit-140-direct-736-cfm-cpu-cooler-true-spirit-140-direct

SE-234 ARGB: https://pcpartpicker.com/product/P7qBD3/id-cooling-se-234-argb-565-cfm-cpu-cooler-se-234-argb

 

Ordered a hyper 212 rgb v2 idk if the rgb will work without the header lol dislike to much rgb anyway.

Edited by goldenburd
Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, goldenburd said:

Ordered a hyper 212 rgb v2 idk if the rgb will work without the header lol dislike to much rgb anyway.

Not sure which cooler you're referring to. Did you mean the Hyper 212 RGB BE?

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted (edited)
  • Author
21 hours ago, WoodenMarker said:

Not sure which cooler you're referring to. Did you mean the Hyper 212 RGB BE?

https://www.amazon.com/dp/B07H22TC1N/ref=cm_sw_r_cp_apa_fabc_1jnbGbEWYGK3W should fit i did find a type Z motherboard for 100 usd but idk if I'd waste my money on it. Could try putting my i5 4690k in a 1551 socket lol.

Edited by goldenburd
More info
Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 hour ago, goldenburd said:

https://www.amazon.com/dp/B07H22TC1N/ref=cm_sw_r_cp_apa_fabc_1jnbGbEWYGK3W should fit i did find a type Z motherboard for 100 usd but idk if I'd waste my money on it. Could try putting my i5 4690k in a 1551 socket lol.

No, the i5-4690k won't fit in another socket. If you want more performance, the money is better put towards upgrading to a newer platform altogether. 

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
17 minutes ago, WoodenMarker said:

No, the i5-4690k won't fit in another socket. If you want more performance, the money is better put towards upgrading to a newer platform altogether. 

I was joking im planning on upgrading after i graduate from school this year. Thats why im buying all the parts now. Also that was a link to the cooler i got. I did find a 1150 motherboard but its not worth wasting 200 usd on it. When new generation is around the corner.  Hopefully this cooler works. Also what about the rgb i don't even have a rgb header? My psu does but uh need molex. Dislike to much rgb anyway 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
23 hours ago, WoodenMarker said:

No, the i5-4690k won't fit in another socket. If you want more performance, the money is better put towards upgrading to a newer platform altogether. 

Build finished fans sound to quiet lol 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
On 1/17/2021 at 8:45 PM, WoodenMarker said:

No, the i5-4690k won't fit in another socket. If you want more performance, the money is better put towards upgrading to a newer platform altogether. 

Got more ram pog for free

20210120_214457.jpg

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×