Jump to content

Overheating r9 290x

xnoobftw
Go to solution Solved by xnoobftw,
5 minutes ago, xAcid9 said:

Lower temp if you open the side panel? - If yes this indicate airflow restriction. If not then your cooler/heatpipe probably broken or didn't make proper contact. 

Oh my god i did this and saw only 1 of 3 fans r spinning 

guess that solves it!

rip 7 year old card

image.thumb.png.ef05a75a1d9f13bc0595e7294006cb3e.png

 

Hi guys, currently this is my setup as shown in the screenshot.

 

WHAT'S THE ISSUE

60c idle, 94c under load

Too toasty under load -> thermal throttling

 

WHAT I'VE DONE

1) Replaced r9 290x (Tri-X) thermal paste with MX-4

2) undervolted by -31mV in MSI AB

3) max fan speed at 55% (it sounds like a jet engine if its any higher)

4) core clocks and memory clocks are at stock (1040/1300)

 

 

Do you guys have any idea what may be the issue?

And another thing is should the top-front 140mm fan be an exhaust instead of an intake?

 

Thanks!

The BBQ: i7-4770 / 212x / Tri-X R9 290x 1075/1400 / MSI H87-G43 GAMING / EVGA G2 850W / Corsair Spec 03 / Samsung 840 EVO 250gb SSD / Toshiba 2TB HDD / 8gb Kingston DDR3 1600mhz

Peripherals: G710+ / G502 / Bose Companion 2 Series III / Audio Technica ATH-M40x / Sound Magic E50

Monitors: Dell U2414H 

Link to comment
Share on other sites

Link to post
Share on other sites

Lower temp if you open the side panel? - If yes this indicate airflow restriction. If not then your cooler/heatpipe probably broken or didn't make proper contact. 

 

I hope you cover the whole die with thermal paste and not using the pea/rice/line/x method.

| Intel i7-3770@4.2Ghz | Asus Z77-V | Zotac 980 Ti Amp! Omega | DDR3 1800mhz 4GB x4 | 300GB Intel DC S3500 SSD | 512GB Plextor M5 Pro | 2x 1TB WD Blue HDD |
 | Enermax NAXN82+ 650W 80Plus Bronze | Fiio E07K | Grado SR80i | Cooler Master XB HAF EVO | Logitech G27 | Logitech G600 | CM Storm Quickfire TK | DualShock 4 |

Link to comment
Share on other sites

Link to post
Share on other sites

60C at idle? Are you sure that the cooler is mounted properly and that the TIM was good and properly applied?

What are your ambient temps?

Desktop: Intel Core i9-9900K | ASUS Strix Z390-F | G.Skill Trident Z Neo 2x16GB 3200MHz CL14 | EVGA GeForce RTX 2070 SUPER XC Ultra | Corsair RM650x | Fractal Design Define R6

Laptop: 2018 Apple MacBook Pro 13"  --  i5-8259U | 8GB LPDDR3 | 512GB NVMe

Peripherals: Leopold FC660C w/ Topre Silent 45g | Logitech MX Master 3 & Razer Basilisk X HyperSpeed | HIFIMAN HE400se & iFi ZEN DAC | Audio-Technica AT2020USB+

Display: Gigabyte G34WQC

Link to comment
Share on other sites

Link to post
Share on other sites

13 minutes ago, xnoobftw said:

3) max fan speed at 55% (it sounds like a jet engine if its any higher)

might have to push that up and live with the noise

Link to comment
Share on other sites

Link to post
Share on other sites

60C at idle indicates a broken cooler or poor contact

 

i have the same GPU in a PC and it doesnt get that warm in idle or load. But it does get pretty noisy since its getting very hot

 

your fan configuration looks good. 

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, xAcid9 said:

Lower temp if you open the side panel? - If yes this indicate airflow restriction. If not then your cooler/heatpipe probably broken or didn't make proper contact. 

Oh my god i did this and saw only 1 of 3 fans r spinning 

guess that solves it!

rip 7 year old card

The BBQ: i7-4770 / 212x / Tri-X R9 290x 1075/1400 / MSI H87-G43 GAMING / EVGA G2 850W / Corsair Spec 03 / Samsung 840 EVO 250gb SSD / Toshiba 2TB HDD / 8gb Kingston DDR3 1600mhz

Peripherals: G710+ / G502 / Bose Companion 2 Series III / Audio Technica ATH-M40x / Sound Magic E50

Monitors: Dell U2414H 

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, xnoobftw said:

1 of 3 fans r spinning 

are you sure they are plugged in the pcb of the  gpu? try aftermarket cooler?

QUOTE ME  FOR ANSWER.

 

Main PC:

Spoiler

|Ryzen 7 3700x, OC to 4.2ghz @1.3V, 67C, or 4.4ghz @1.456V, 87C || Asus strix 5700 XT, +50 core, +50 memory, +50 power (not a great overclocker) || Asus Strix b550-A || G.skill trident Z Neo rgb 32gb 3600mhz cl16-19-19-19-39, oc to 3733mhz with the same timings || Cooler Master ml360 RGB AIO || Phanteks P500A Digital || Thermaltake ToughPower grand RGB750w 80+gold || Samsung 850 250gb and Adata SX 6000 Lite 500gb || Toshiba 5400rpm 1tb || Asus Rog Theta 7.1 || Asus Rog claymore || Asus Gladius 2 origin gaming mouse || Monitor 1 Asus 1080p 144hz || Monitor 2 AOC 1080p 75hz || 

Test Rig.

Spoiler

Ryzen 5 3400G || Gigabyte b450 S2H || Hyper X fury 2x4gb 2666mhz cl 16 ||Stock cooler || Antec NX100 || Silverstone essential 400w || Transgend SSD 220s 480gb ||

Just Sold

Spoiler

| i3 9100F || Msi Gaming X gtx 1050 TI || MSI Z390 A-Pro || Kingston 1x16gb 2400mhz cl17 || Stock cooler || Kolink Horizon RGB || Corsair CV 550w || Pny CS900 120gb ||

 

Tier lists for building a PC.

 

Motherboard tier list. Tier A for overclocking 5950x. Tier B for overclocking 5900x, Tier C for overclocking 5800X. Tier D for overclocking 5600X. Tier F for 4/6 core Cpus at stock. Tier E avoid.

(Also case airflow matter or if you are using Downcraft air cooler)

Spoiler

 

Gpu tier list. Rtx 3000 and RX 6000 not included since not so many reviews. Tier S for Water cooling. Tier A and B for overcloking. Tier C stock and Tier D avoid.

( You can overclock Tier C just fine, but it can get very loud, that is why it is not recommended for overclocking, same with tier D)

Spoiler

 

Psu tier List. Tier A for Rtx 3000, Vega and RX 6000. Tier B For anything else. Tier C cheap/IGPU. Tier D and E avoid.

(RTX 3000/ RX 6000 Might run just fine with higher wattage tier B unit, Rtx 3070 runs fine with tier B units)

Spoiler

 

Cpu cooler tier list. Tier 1&2 for power hungry Cpus with Overclock. Tier 3&4 for overclocking Ryzen 3,5,7 or lower power Intel Cpus. Tier 5 for overclocking low end Cpus or 4/6 core Ryzen. Tier 6&7 for stock. Tier 8&9 Ryzen stock cooler performance. Do not waste your money!

Spoiler

 

Storage tier List. Tier A for Moving files/  OS. Tier B for OS/Games. Tier C for games. Tier D budget Pcs. Tier E if on sale not the worst but not good.

(With a grain of salt, I use tier C for OS myself)

Spoiler

 

Case Tier List. Work In Progress. Most Phanteks airflow series cases already done!

Ask me anything :)

Link to comment
Share on other sites

Link to post
Share on other sites

18 minutes ago, SavageNeo said:

are you sure they are plugged in the pcb of the  gpu? try aftermarket cooler?

 

24 minutes ago, flo_306 said:

60C at idle indicates a broken cooler or poor contact

 

i have the same GPU in a PC and it doesnt get that warm in idle or load. But it does get pretty noisy since its getting very hot

 

your fan configuration looks good. 

 

24 minutes ago, boggy77 said:

might have to push that up and live with the noise

 

28 minutes ago, Mateyyy said:

60C at idle? Are you sure that the cooler is mounted properly and that the TIM was good and properly applied?

What are your ambient temps?

 

30 minutes ago, xAcid9 said:

Lower temp if you open the side panel? - If yes this indicate airflow restriction. If not then your cooler/heatpipe probably broken or didn't make proper contact. 

 

I hope you cover the whole die with thermal paste and not using the pea/rice/line/x method.

 

 

Hi all,

 

So i found out that out of 3 fans, left (flushed to rear) is not working (i tried moving it with my hands it wasn't stuck or anything, just not moving)

center was working as per normal

right (flushed to front) was stupidly stuck cos my pci-e cable was jamming it, now it's working

 

WITH CENTER & RIGHT FAN

Idle = 60c

Load = 81c

 

is there a way to diagnose and fix the only fan that is not moving?

The BBQ: i7-4770 / 212x / Tri-X R9 290x 1075/1400 / MSI H87-G43 GAMING / EVGA G2 850W / Corsair Spec 03 / Samsung 840 EVO 250gb SSD / Toshiba 2TB HDD / 8gb Kingston DDR3 1600mhz

Peripherals: G710+ / G502 / Bose Companion 2 Series III / Audio Technica ATH-M40x / Sound Magic E50

Monitors: Dell U2414H 

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, xnoobftw said:

 

 

 

 

 

 

Hi all,

 

So i found out that out of 3 fans, left (flushed to rear) is not working (i tried moving it with my hands it wasn't stuck or anything, just not moving)

center was working as per normal

right (flushed to front) was stupidly stuck cos my pci-e cable was jamming it, now it's working

 

WITH CENTER & RIGHT FAN

Idle = 60c

Load = 81c

 

is there a way to diagnose and fix the only fan that is not moving?

The odds are the fan is defective, maybe you could get it fixed at a local repair shop, but don't count on it, try running the both good fans at 100%, ignore the noise for now and try it

Link to comment
Share on other sites

Link to post
Share on other sites

6 minutes ago, xnoobftw said:

 

 

 

 

 

 

Hi all,

 

So i found out that out of 3 fans, left (flushed to rear) is not working (i tried moving it with my hands it wasn't stuck or anything, just not moving)

center was working as per normal

right (flushed to front) was stupidly stuck cos my pci-e cable was jamming it, now it's working

 

WITH CENTER & RIGHT FAN

Idle = 60c

Load = 81c

 

is there a way to diagnose and fix the only fan that is not moving?

If its not movin then its broken. Try to get it repaired at a local electronics shop. Gl m8

Link to comment
Share on other sites

Link to post
Share on other sites

28 minutes ago, xnoobftw said:

 

 

 

 

 

 

Hi all,

 

So i found out that out of 3 fans, left (flushed to rear) is not working (i tried moving it with my hands it wasn't stuck or anything, just not moving)

center was working as per normal

right (flushed to front) was stupidly stuck cos my pci-e cable was jamming it, now it's working

 

WITH CENTER & RIGHT FAN

Idle = 60c

Load = 81c

 

is there a way to diagnose and fix the only fan that is not moving?

The tri-x 290 has a lot of fan failure but it's very easy to do the fan mod on it by using desktop grade fans making it cool better and be silent.

Link to comment
Share on other sites

Link to post
Share on other sites

2 hours ago, xnoobftw said:

Oh my god i did this and saw only 1 of 3 fans r spinning 

guess that solves it!

rip 7 year old card

remove the shroud and strap a couple of good 120mm fans. 

| Intel i7-3770@4.2Ghz | Asus Z77-V | Zotac 980 Ti Amp! Omega | DDR3 1800mhz 4GB x4 | 300GB Intel DC S3500 SSD | 512GB Plextor M5 Pro | 2x 1TB WD Blue HDD |
 | Enermax NAXN82+ 650W 80Plus Bronze | Fiio E07K | Grado SR80i | Cooler Master XB HAF EVO | Logitech G27 | Logitech G600 | CM Storm Quickfire TK | DualShock 4 |

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×