Jump to content

H700i?

JCP
 Share
Posted

hey guys, I'm just wondering if the nzxt H700i supports 360 degree aio's (nzxt kraken x72). Because I randomly made a PC using pcpartpicker and my friend decided to randomly buy it for $4,000

Thx for any help

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

There's plenty of better cases for watercooling / airflow

 

But no it doesn't, to my knowledge 

Community Standards || Tech News Posting Guidelines

---======================================================================---

CPU: R5 3600 || GPU: RTX 3070|| Memory: 32GB @ 3200 || Cooler: Scythe Big Shuriken || PSU: 650W EVGA GM || Case: NR200P

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Slottr said:

There's plenty of better cases for watercooling / airflow

 

But no it doesn't, to my knowledge 

I'm so confused, some people say you can and some say you can't. Arghhh?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
5 minutes ago, Jacobtechtips? said:

I'm so confused, some people say you can and some say you can't. Arghhh?

From the product page

image.png.531d6422b63ecaa0b7ddd8b749290157.png

 

So it looks like you should be okay

Community Standards || Tech News Posting Guidelines

---======================================================================---

CPU: R5 3600 || GPU: RTX 3070|| Memory: 32GB @ 3200 || Cooler: Scythe Big Shuriken || PSU: 650W EVGA GM || Case: NR200P

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I just rebuilt into a H700i and have a Corsair H150i, can confirm it fits a 360mm radiator. It will only fit in the top portion unless you pull the 3 fans out of the front and relocate them to the top, but with the hub the fans are wired in pretty good and redoing cable management in my case will be a pain, so I left it. If you rip all the fans out you can actually run 2 360mm rads, one in front and one on top. 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
3 minutes ago, Mikeinike7 said:

I just rebuilt into a H700i and have a Corsair H150i, can confirm it fits a 360mm radiator. It will only fit in the top portion unless you pull the 3 fans out of the front and relocate them to the top, but with the hub the fans are wired in pretty good and redoing cable management in my case will be a pain, so I left it. If you rip all the fans out you can actually run 2 360mm rads, one in front and one on top. 

the front fans are intake by default...right?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, Jacobtechtips? said:

the front fans are intake by default...right?

Front 3 fans installed are intake and the rear that's installed is exhaust.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
27 minutes ago, Mikeinike7 said:

Front 3 fans installed are intake and the rear that's installed is exhaust.

Ok, so would it be best to install the aio as an exhaust (fans blowing air out)?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
13 hours ago, Jacobtechtips? said:

hey guys, I'm just wondering if the nzxt H700i supports 360 degree aio's (nzxt kraken x72). Because I randomly made a PC using pcpartpicker and my friend decided to randomly buy it for $4,000

Thx for any help

You can fit it in the top or front. But dont take my word for it. Just look at the people who built in that case with a 360mm rad.

 

https://pcpartpicker.com/builds/by_part/wXX2FT#h=531

https://pcpartpicker.com/builds/by_part/mkbwrH#h=531

https://pcpartpicker.com/builds/by_part/CVtWGX#h=531

https://pcpartpicker.com/builds/by_part/8JNv6h#h=531

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna

Make sure to Quote posts or tag the person with @[username] so they know you responded to them!

 RGB Build Post 2019 --- Rainbow 🦆 2020 --- Velka 5 V2.0 Build 2021

Purple Build Post ---  Blue Build Post --- Blue Build Post 2018 --- Project ITNOS

CPU i7-4790k    Motherboard Gigabyte Z97N-WIFI    RAM G.Skill Sniper DDR3 1866mhz    GPU EVGA GTX1080Ti FTW3    Case Corsair 380T   

Storage Samsung EVO 250GB, Samsung EVO 1TB, WD Black 3TB, WD Black 5TB    PSU Corsair CX750M    Cooling Cryorig H7 with NF-A12x25

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Power Supplies

×