Jump to content

G4650 cooler

stefs
By stefs
in Cooling
 Share
Posted

Grab the cheapest tower cooler you can find on the market. That will be overkilll for the CPU you are using, but it will be quiet. 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

If you are searching for a good quiet low profile cooler, you should check Artcic Freezer 11 LP - very cheap, absolutelly silent. I've got it on my i7-4770 and I'm satisified.

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

What are your temps? Have you tried lowering fan speeds?

 

Moved to Air Cooling.

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Some new thermal paste should make the stock cooler good again.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
4 hours ago, WoodenMarker said:

What are your temps? Have you tried lowering fan speeds?

 

Moved to Air Cooling.

This is when i have open only browser with yt. Click for bigger image. This is not the problem, its quiet right now.

Second picture is when i play games for 20minutes, he becomes very noisy, this is the reason why i want to buy another.

yt.PNG

sfdssd.PNG

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
29 minutes ago, stefs said:

This is when i have open only browser with yt. Click for bigger image. This is not the problem, its quiet right now.

Second picture is when i play games for 20minutes, he becomes very noisy, this is the reason why i want to buy another.

Temps aren't that high -- it's fine up to 80-90c at load. You can afford to lower fan speeds a bit.

Are you sure that the noise is from your cpu cooler and not elsewhere in the system like on the graphics card? Does stopping the cpu fan with your hand stop the noise?

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Can i stop?

I am afraid from thunder.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
26 minutes ago, stefs said:

Can i stop?

I am afraid from thunder.

Stopping the fans with your hand is fine as long as they're not dangerously high rpm. The Intel stock cooler blades are rather thick and not dangerous. No, you won't get shocked.

Make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them. 

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

@@WoodenMarker

Thank you, you save me from spending money without any reason.

Its not CPU its GPU!! Cpu is not too much loud.

Now, i watch in site, and see that newest bios is F3, and they improve performance.

https://www.gigabyte.com/Graphics-Card/GV-N105TD5-4GD#support-dl-bios

How to see bios in my graphic and update if i want?

In hw info i see this: Video BIOS Version:    86.07.39.00.57

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
18 hours ago, stefs said:

This is when i have open only browser with yt. Click for bigger image. This is not the problem, its quiet right now.

Second picture is when i play games for 20minutes, he becomes very noisy, this is the reason why i want to buy another.

yt.PNG

sfdssd.PNG

Have you tried the Arctic Freezer 11 LP I was refering to earlier?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

You can get a cooler master Hyper 212/212X/212 Evo. Theyre relatively cheap are only audible at 2000 rpm. i say so cuz i have one 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Thanks, but i said that i see CPU cooler is not loud, GPU is loud.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
5 hours ago, stefs said:

Now, i watch in site, and see that newest bios is F3, and they improve performance.

https://www.gigabyte.com/Graphics-Card/GV-N105TD5-4GD#support-dl-bios

How to see bios in my graphic and update if i want?

In hw info i see this: Video BIOS Version:    86.07.39.00.57

Don't update the bios if you don't need to since an error can potentially brick the card.

What case do you have and how is the case airflow set up? Temps are abnormally high for a 1050 Ti with fans at 2000rpm.

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
3 hours ago, stefs said:

I think this is the problem, i dont have fans in my case. This is the reason why my case is always open.

Case is: https://ms-start.com/ms-cyclops-iii-midi-tower-gaming-kuciste.aspx

Do you have suggestions for fans?

Where are you shopping / located?

Make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
16 hours ago, stefs said:

@WoodenMarker

I am from Montenegro. The most cheapest sellers is this:

http://ewe4.me/kategorija/343/Ventilatori/

https://www.multicom.me/racunari-i-oprema/kuler-za-kuciste/svi.html?page=2&vrstaprikaza=kocka

Or, i can buy from ebay and from here:
https://www.grooves-inc.com/index.php?osCsid=7f06243340d92ebcf0c00e2fdde0c44f

The cheapest solution would be to add a rear exhaust: https://www.grooves-inc.com/arctic-gmbh-120mm-arctic-cooling-f12-pro-arctic-gmbh-hardware-electronic-pZZa1-2097970575.html?osCsid=7f06243340d92ebcf0c00e2fdde0c44f

It can only be mounted one way in push so keep that in mind if you want to reuse it in a different location for a future system. 

If you want more flexibility, you could use the normal F12 rev. 2 instead. It performs a bit worse but can be mounted in pull: https://www.grooves-inc.com/arctic-gmbh-120mm-arctic-cooling-f12-pwm-rev-arctic-gmbh-accessories-pZZa1-2098043196.html?osCsid=7f06243340d92ebcf0c00e2fdde0c44f

You can add a second fan at the front as intake if you want more airflow. 

If you want something particularly quiet, PW2's: https://www.grooves-inc.com/quiet-pure-wings-120mm-pwm-gehaeuseluefter-bequiet-hardware-electronic-pZZa1-2097677670.html?osCsid=7f06243340d92ebcf0c00e2fdde0c44f

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 hour ago, stefs said:

@WoodenMarker

Do you think 2 pc of Pure wings 2 will be enought?

1 rear exhaust is already enough and an additional front intake is plenty.

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
  • 3 weeks later...
Posted
  • Author
On 8/30/2018 at 8:35 AM, WoodenMarker said:

1 rear exhaust is already enough and an additional front intake is plenty.

I get  2 pc of Pure Wings 2, can you tell me where to put and in which side?

Thanks..

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
On 9/18/2018 at 2:14 AM, stefs said:

I get  2 pc of Pure Wings 2, can you tell me where to put and in which side?

Thanks..

1 rear exhaust and 1 front intake.

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

 

On 9/19/2018 at 11:38 PM, WoodenMarker said:

1 rear exhaust and 1 front intake.

Thanks, but do i secure to do this because its close to the wall?

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×