Jump to content

Privacy monitor mod [in progress]

shypin
By shypin
in Cases and Mods
 Share
Posted

dont have any proper tools so im just scraping the glue off with a flat head screwdriver while heating it up with a hairdryer right now

 

 

UPDATE 1: tried to remove the bezel while i was cleaning off the glue, and i think i cracked the chip in the process. grabbed another monitor and peeled off the polarized film, but was too lazy to clean the glue. wanted to test both monitors out but realized my gpu doesnt support vga. found my old geforce 220 but its dead. gonna try this again friday when i get a vga-dvi converter.

post-245931-0-61104300-1448476982_thumb.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

dont have any proper tools so im just scraping the glue off with a flat head screwdriver while heating it up with a hairdryer right now

10/10 best way to do it 

Main PC |CPU - i7-6700k|GPU - R9 290x tri-x 4gb|RAM - 16gb ddr4|MOBO - MSI z170 - A PRO|HDD - WD 1TB/240gb Sandisk |PSU - 700w Raidmax

Laptop |CPU - i7 4720hq|GPU - 960m 2gb|Ram - 8gb 2x4|Model - y50-70 Touch|SSD - 240gb Patriot drive|Display - 1920x1080 IPS touch

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I was hoping someone was going to do it. 

I was going to, but I have no use for it.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

dont have any proper tools so im just scraping the glue off with a flat head screwdriver while heating it up with a hairdryer right now

If this works, it'll be a miracle.

Project White Lightning (My ITX Gaming PC): Core i5-4690K | CRYORIG H5 Ultimate | ASUS Maximus VII Impact | HyperX Savage 2x8GB DDR3 | Samsung 850 EVO 250GB | WD Black 1TB | Sapphire RX 480 8GB NITRO+ OC | Phanteks Enthoo EVOLV ITX | Corsair AX760 | LG 29UM67 | CM Storm Quickfire Ultimate | Logitech G502 Proteus Spectrum | HyperX Cloud II | Logitech Z333

Benchmark Results: 3DMark Firestrike: 10,528 | SteamVR VR Ready (avg. quality 7.1) | VRMark 7,004 (VR Ready)

 

Other systems I've built:

Core i3-6100 | CM Hyper 212 EVO | MSI H110M ECO | Corsair Vengeance LPX 1x8GB DDR4  | ADATA SP550 120GB | Seagate 500GB | EVGA ACX 2.0 GTX 1050 Ti | Fractal Design Core 1500 | Corsair CX450M

Core i5-4590 | Intel Stock Cooler | Gigabyte GA-H97N-WIFI | HyperX Savage 2x4GB DDR3 | Seagate 500GB | Intel Integrated HD Graphics | Fractal Design Arc Mini R2 | be quiet! Pure Power L8 350W

 

I am not a professional. I am not an expert. I am just a smartass. Don't try and blame me if you break something when acting upon my advice.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

...why are you still reading this?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

It looks like you are gouging the absolute shit out of the screen (which is probably the case if you're using a flat head screw driver - there's a reason why you should use a spatula or putty scraper...).

And if you're trying to duplicate the video released to day I hope you already ordered polarized film from amazon or ebay....

END OF LINE

-- Project Deep Freeze Build Log --

Quote me so that I always know when you reply, feel free to snip if the quote is long. May your FPS be high and your temperatures low.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Followed because interested and just to see if the screwdriver didn't damage the screen

"We're all in this together, might as well be friends" Tom, Toonami.

 

mini eLiXiVy: my open source 65% mechanical PCB, a build log, PCB anatomy and discussing open source licenses: https://linustechtips.com/topic/1366493-elixivy-a-65-mechanical-keyboard-build-log-pcb-anatomy-and-how-i-open-sourced-this-project/

 

mini_cardboard: a 4% keyboard build log and how keyboards work: https://linustechtips.com/topic/1328547-mini_cardboard-a-4-keyboard-build-log-and-how-keyboards-work/

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

a flat head screwdriver 

 

Um ok..... 

 

Watch the video, man...

Intel Core i7-6700K | Corsair H105 | Asus Z170I PRO GAMING | G.Skill TridentZ Series 16GB | 950 PRO 512GB M.2

 

Asus GeForce GTX 980 Ti 6GB STRIX OC | BitFenix Prodigy (Black/Red) | XFX PRO Black Edition 850W

 

 

My Build | PCPartPicker | CoC

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

dont do this your ruining your monitor theres a reason why the uv and polarization filter is on there 

Project Iridium:   CPU: Intel 4820K   CPU Cooler: Custom Loop  Motherboard: Asus Rampage IV Black Edition   RAM: Avexir Blitz  Storage: Samsung 840 EVO 250GB SSD and Seagate Barracuda 3TB HDD   GPU: Asus 780 6GB Strix   Case: IN WIN 909   PSU: Corsair RM1000      Project Iridium build log http://linustechtips.com/main/topic/451088-project-iridium-build-log/

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Followed because interested and just to see if the screwdriver didn't damage the screen

Same

END OF LINE

-- Project Deep Freeze Build Log --

Quote me so that I always know when you reply, feel free to snip if the quote is long. May your FPS be high and your temperatures low.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

@shypin you didn't take the bezel off, so I suppose you didn't cut around the screen as well?

"We're all in this together, might as well be friends" Tom, Toonami.

 

mini eLiXiVy: my open source 65% mechanical PCB, a build log, PCB anatomy and discussing open source licenses: https://linustechtips.com/topic/1366493-elixivy-a-65-mechanical-keyboard-build-log-pcb-anatomy-and-how-i-open-sourced-this-project/

 

mini_cardboard: a 4% keyboard build log and how keyboards work: https://linustechtips.com/topic/1328547-mini_cardboard-a-4-keyboard-build-log-and-how-keyboards-work/

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

It looks like you are gouging the absolute shit out of the screen (which is probably the case if you're using a flat head screw driver - there's a reason why you should use a spatula or putty scraper...).

And if you're trying to duplicate the video released to day I hope you already ordered polarized film from amazon or ebay....

i just cut 3 large pieces of polarized film (large enough for glasses) and gave up trying to keep the film as one piece

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

i hope this is a liquid crystal display if its not it wont work 

Project Iridium:   CPU: Intel 4820K   CPU Cooler: Custom Loop  Motherboard: Asus Rampage IV Black Edition   RAM: Avexir Blitz  Storage: Samsung 840 EVO 250GB SSD and Seagate Barracuda 3TB HDD   GPU: Asus 780 6GB Strix   Case: IN WIN 909   PSU: Corsair RM1000      Project Iridium build log http://linustechtips.com/main/topic/451088-project-iridium-build-log/

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

@shypin you didn't take the bezel off, so I suppose you didn't cut around the screen as well?

the bezel is actually connected to the board of the monitor so i couldnt

 

i did cut around the screen

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cases and Mods

×