Jump to content

Recovering Raid in a Lacie NAS

Rekiam
By Rekiam
in Servers, NAS, and Home Lab
 Share
Posted

At work we have a Lacie NAS with 5 HDD installed. Each is drive is a Seagate ST4000DM000 4TB. One of the disks failed on us and I have to replace it in order to access the information again. One of our local providers has a Seagate ST4000DM005 4TB drive. Would this be compatible with the Raid on the NAS? The NAS is configured in Raid 5.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Yep any 4tb or bigger hdd should work fine, so put that model in and it will be fine.

 

Id would probably stay away from destkop drives here, esp the barracuda as they are smr drives.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Electronics Wizardy said:

Yep any 4tb or bigger hdd should work fine, so put that model in and it will be fine.

 

Id would probably stay away from destkop drives here, esp the barracuda as they are smr drives.

Thanks for the response. The NAS came with those drives when it was purchased so I didn't have much choice in the matter.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Well since you're replacing it, you do have a choice, so maybe replace it with a NAS drive? Like an ironwolf 4TB?

I have no signature

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Servers, NAS, and Home Lab

×