Posted April 20, 2018 I only have 40 dollars for a new cooler that is better than the included fan cooler and will help keep my system at medium noise level and help prevent my system from heating up to fast for hours of gaming. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 20, 2018 Which i5? Intel has had a fairly standardised mounting system for its sockets for a while, but there are some differences. Just knowing it's an i5 doesn't tell us what socket it is. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 20, 2018 Author The cpu socket is the core i5 6200 and a cooler that seems easy to assemble on a b250 hd3 motherboard. I hope that is enough information Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 20, 2018 A Hyper 212 EVO would probably do the job just fine! My Folding Stats - Join the fight against COVID-19 with FOLDING! - If someone has helped you out on the forum don't forget to give them a reaction to say thank you! The only true wisdom is in knowing you know nothing. - Socrates Please put as much effort into your question as you expect me to put into answering it. CPU Ryzen 9 5950X Motherboard Gigabyte Aorus GA-AX370-GAMING 5 RAM 32GB DDR4 3200 GPU Inno3D 4070 Ti Case Cooler Master - MasterCase H500P Storage Western Digital Black 250GB, Seagate BarraCuda 1TB x2 PSU EVGA Supernova 1000w Display(s) Lenovo L29w-30 29 Inch UltraWide Full HD, BenQ - XL2430(portrait), Dell P2311Hb(portrait) Cooling MasterLiquid Lite 240 Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 20, 2018 there is no desktop i5 6200, but b250 motherboards use LGA 115x compatible coolers which includes all but AMD box cooler. Basically anything you can buy out there that doesnt look like the box cooler is better than it. Where will you buy from? the Hyper 212 is widely available, but there could be cheaper choices. CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1 Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync Desktop benching: Cinebench R15 Single thread:168 Multi-thread: 833 SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 20, 2018 3 minutes ago, mike.s said: The cpu socket is the core i5 6200 and a cooler that seems easy to assemble on a b250 hd3 motherboard. I hope that is enough information There is no such thing as an i5 6200. Must be a 6500. Get a Cooler Master Hyper 212 Evo. PC Specs - AMD Ryzen 7 5800X3D - MSI B550M Mortar - 32GB Corsair Vengeance RGB DDR4-3600 @ CL16 - ASRock RX7800XT - 660p 1TBGB & Crucial P5 1TB - Fractal Define Mini C - CM V750v2 - Windows 11 Pro Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 20, 2018 1 minute ago, mike.s said: The cpu socket is the core i5 6200 and a cooler that seems easy to assemble on a b250 hd3 motherboard. I hope that is enough information The i5 6200(U) is a laptop CPU, so it can't be that. Anyway, that board uses the LGA1151 socket, which shares the same mounting system as all of Intel's other LGA115x sockets, so pretty much all coolers will fit it. The CoolerMaster Hyper 212 EVO is generally considered one of the best options for the price, so it's worth taking a look at that. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 20, 2018 Author 2 minutes ago, Jurrunio said: there is no desktop i5 6200, but b250 motherboards use LGA 115x compatible coolers. Basically anything you can buy out there that doesnt look like the box cooler is better than it. Where will you buy from? the Hyper 212 is widely available, but there could be cheaper choices. Oh sorry i will recheck the cpu when i get home and amazon Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 20, 2018 Author 2 minutes ago, Oshino Shinobu said: The i5 6200(U) is a laptop CPU, so it can't be that. Anyway, that board uses the LGA1151 socket, which shares the same mounting system as all of Intel's other LGA115x sockets, so pretty much all coolers will fit it. The CoolerMaster Hyper 212 EVO is generally considered one of the best options for the price, so it's worth taking a look at that. Yah i had my eye on that cooler but i am a noob to mounting the back plate and would the assembling of the cooler be difficult? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 20, 2018 4 minutes ago, mike.s said: mounting the back plate other than the crappy stock cooler which uses the push-pin design, all other aftermarket coolers need a backplate. Whether you need to disassemble the entire thing depends on the case layout. Some have a large cut out at the back of the case so you can access to the backplate easily, but it's still easier to do it with the motherboard taken out. CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1 Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync Desktop benching: Cinebench R15 Single thread:168 Multi-thread: 833 SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 20, 2018 5 minutes ago, mike.s said: Yah i had my eye on that cooler but i am a noob to mounting the back plate and would the assembling of the cooler be difficult? Not at all, it's very simple. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 20, 2018 Author 6 minutes ago, Oshino Shinobu said: Not at all, it's very simple. Do i really need anti static wristband Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 20, 2018 Why would you waste cash to cool that thing? A crushed soda can will provide enough cooling for a locked i5. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 20, 2018 Just now, mike.s said: Do i really need anti static wristband Not really. It's nice to have for peace of mind, but isn't required. Just make sure you touch something touch something metal (and grounded) every now and then to discharge any static electricity. There's a lot of paranoia about ESD when working on PCs, but it's generally not as big an issue as people make it out to be. Just don't work on carpet or in clothes that are prone to building up static electricity. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 20, 2018 2 minutes ago, mike.s said: Do i really need anti static wristband No, but make sure to ground yourself repeatedly by touching the screws on the PSU for example (or other metal grounded objects). A wristband is to be 100% safe. CPU: Ryzen 7 5800X Cooler: Corsair H100i Platinum SE Mobo: Asus B550-A GPU: EVGA RTX 2070 XC RAM: G.Skill Trident Z RGB 3200MHz 16CL 4x8GB (DDR4) SSD0: Crucial MX300 525GB SSD1: Samsung QVO 1TB PSU: NZXT C650 Case: Corsair 4000D Airflow Monitor: Asus VG259QM (240Hz) I usually edit my posts immediately after posting them, as I don't check for typos before pressing the shiny SUBMIT button. Unraid Server CPU: Ryzen 5 7600 Cooler: Noctua NH-U12S Mobo: Asus B650E-i RAM: Kingston Server Premier ECC 2x32GB (DDR5) SSD: Samsung 980 2x1TB HDD: Toshiba MG09 1x18TB; Toshiba MG08 2x16TB HDD Controller: LSI 9207-8i PSU: Corsair SF750 Case: Node 304 Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 20, 2018 Author 4 minutes ago, Oshino Shinobu said: Not really. It's nice to have for peace of mind, but isn't required. Just make sure you touch something touch something metal (and grounded) every now and then to discharge any static electricity. 1 Would touching a metal chair be safe enough? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 20, 2018 2 minutes ago, mike.s said: Would touching a metal chair be safe enough? Probably the best way is to have the PSU plugged into the socket, but turned off. Then touch the metal on the back of the PSU. The key thing is that the metal needs to be grounded and that's a sure way to do it. Things like metal piping often works as well. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now