need help the screw is in an ass place

[Steve Boberson]

i cant get the fourth fucking screw at that bottom of the enthoo pro m and i cant get it out  because it puts the screwdriver at a weird angle and i need to remove the screw so i can put in a 360mm radiator. how do i get the screw out?

[dizmo]

What hits? Maybe you just need a longer screw driver.

[Theguywhobea]

Get a longer screw driver?

[Steve Boberson]

Just now, dizmo said:

What hits? Maybe you just need a longer screw driver.

no its perfectly long enough its just that the foot goes directly over the screw. the feet arent that long

[dizmo]

Just now, Steve Boberson said:

no its perfectly long enough its just that the foot goes directly over the screw. the feet arent that long

So it's not the same as the one on the opposite side?

What happens if you try to remove the feet?

[Steve Boberson]

i tried removing the screw but theres screws on the inside of the foot

 

as in i cant remove the feet

 

whats worse is i think the screw holding in the cage is stripped

 

i'm fine with having to break the screw or something to get it out as long as it doesnt damage the rest of the case, i've got plenty extra screws and i dont really need the hdd cage either.

[kb5zue]

Go figure.  Take a minute to relax, then think about the stuff the makers had to go thru to get it in there in the first place.  Once you figure out how they got it in there in the first place, just think about doing that in reverse.  Sure enough, it will come out.

 

[Steve Boberson]

finally thank god, i got it out, all i had to do was imagine me bashing this case with a hammer and i got the screw out with the screwdriver and dear god i stripped it badly, but not beyond use.