Overlord PC water cooling RAD (In progress)

[DIY tech]

Overlord PC water cooling RAD (In progress) 

 

Sorry for the bad quality video. Most of the parts were shot without sun light ( #overcasted ) so there is much noise/low quality. I dont have a proper studio setup and without a bright daylight my video quality suffers a lot.

So first time started working on my very own build. It will surely take time as i make most of the stuff by myself. Finding parts and crafting takes time so please be patient. Feedback is always welcomed so are the ideas.

Q. The first question would be why u are making it ?
A. I am DIY Tech, i am crazy and its so much fun. It will be less in cost and better in performance #Hopefully

*Command and Conquer fans can guess its performance right away

*The amount spend so far on this radiator is around 20$ 

 

 

[GDRRiley]

some lighting tips. also great work

 

[DIY tech]

1 minute ago, GDRRiley said:

some lighting tips

 

I need those soft boxes for sure. But like i said apart from my ambient light i have none atm. 

[Imbellis]

Just a note; whatever embedded link (of video/picture) seems not to be working on mobile. Don't know if it's just me.

[Imbellis]

And now it works.. My bad. I have no idea why it wasn't working before. Perhaps bad internet on my mobile.

[haft2doit]

Nice work haha.  All I was thinking while watching the dremeling was "someone please get this guy an angle grinder!"  Can't wait to see the behemoth this thing fits into.

[DIY tech]

4 hours ago, haft2doit said:

Nice work haha.  All I was thinking while watching the dremeling was "someone please get this guy an angle grinder!"  Can't wait to see the behemoth this thing fits into.

I hope u havent missed the part where the chuck fell off   You are trying to get to the future breaking sound barriers. It will take time. Remember I need to make fans too  

 

8 hours ago, Imbellis said:

And now it works.. My bad. I have no idea why it wasn't working before. Perhaps bad internet on my mobile.

Try Try again FTW 

[DIY tech]

PART 2 added

[SlipperyPete]

On 8/11/2017 at 6:21 PM, DIY tech said:

Overlord PC water cooling RAD (In progress) 

 

Sorry for the bad quality video. Most of the parts were shot without sun light ( #overcasted ) so there is much noise/low quality. I dont have a proper studio setup and without a bright daylight my video quality suffers a lot.

So first time started working on my very own build. It will surely take time as i make most of the stuff by myself. Finding parts and crafting takes time so please be patient. Feedback is always welcomed so are the ideas.

Q. The first question would be why u are making it ?
A. I am DIY Tech, i am crazy and its so much fun. It will be less in cost and better in performance #Hopefully

*Command and Conquer fans can guess its performance right away

*The amount spend so far on this radiator is around 20$ 

 

 

by far the silliest mod i have ever seen but i am excited to follow this project.

[DIY tech]

9 hours ago, SlipperyPete said:

by far the silliest mod i have ever seen but i am excited to follow this project.

Silliest  what about craziest ??

[You_are_a_cunt]

22 hours ago, DIY tech said:

Silliest  what about craziest ??

We have @Hackentosher, @Comic_Sans_MS, @manikyath and @iamdarkyoshi to thank for crazy ideas. We've... seen things.

[Hackentosher]

3 hours ago, revsilverspine said:

We have @Hackentosher, @Comic_Sans_MS, @manikyath and @iamdarkyoshi to thank for crazy ideas. We've... seen things.

I feel so honored to even be considered for this list, @iamdarkyoshichas done some far dumber shit

[You_are_a_cunt]

21 minutes ago, Hackentosher said:

I feel so honored to even be considered for this list, @iamdarkyoshichas done some far dumber shit

You made the biggest portable fire hazard, so you're definitely on the list.

[manikyath]

On 22-8-2017 at 5:04 PM, DIY tech said:

Silliest  what about craziest ??

4 hours ago, revsilverspine said:

We have @Hackentosher, @Comic_Sans_MS, @manikyath and @iamdarkyoshi to thank for crazy ideas. We've... seen things.

i represent:

[Hackentosher]

1 hour ago, revsilverspine said:

You made the biggest portable fire hazard, so you're definitely on the list.

I think that prize may go to @CUDA_Cores, but  his packs are fused so...  http://www.strawpoll.me/13772446?

[Hackentosher]

1 minute ago, CUDA_Cores said:

I voted my pack was the biggest fire hazard lol

mine doesn't have any fuses. I don't really think it needs them because i'm only drawing like 0.3c from it.

 

pics for reference.

Spoiler

 

 

[You_are_a_cunt]

4 minutes ago, Hackentosher said:

I think that prize may go to @CUDA_Cores, but  his packs are fused so...  http://www.strawpoll.me/13772446?

 Oh noes! I forgot about @CUDA_Cores

I'll show myself out the door of shame =\

[DIY tech]

damn looks like some big guys talking. Cant understand nothing

[Hackentosher]

1 hour ago, CUDA_Cores said:

 

My ebike battery doesn't have any fuses either. In fact most ebike batteries have no fuses so....

Tf you talking about? This was the ebike battery you sent me. Each and every cell had its own fuse.

Spoiler

Getting back on topic, what is this post even about? Making a DIY radiator and fans?

[DIY tech]

I was working on my RAD today when i received the package. I was so happy n excited that i left my work so the Rad video will most probably come on Sunday. Most of the work is done i hope it will be complete. 

Nothing is better than free PC hardware n stuff

 

[DIY tech]

Overlord PC radiator | homemade | DIY Tech | Custom water cooling part3 The cover 

 

 

[DIY tech]

Overlord PC radiator | homemade | DIY Tech | Custom water cooling part4 The Finale
_______________________________________________________________

Whats next on this project?

Pump modification (the same pump u saw in the video) and Making a custom reservoir (as my pump cant work outta water)
CPU and GPU blocks (Not going for EK will be some ghetto modding stuff)

Next Video will be regarding some looks mod of an air cooler i have.

_______________________________________________________________

Need your help !

As this rad has about 96 joints i dont want to risk my system by putting it on the top of my case. so If u have suggestions about where to put it in the sytem comment down below.
Any suggestion to make the RAD look better ?

_______________________________________________________________

 

 

[SlipperyPete]

3 hours ago, DIY tech said:

Overlord PC radiator | homemade | DIY Tech | Custom water cooling part4 The Finale
_______________________________________________________________

Whats next on this project?

Pump modification (the same pump u saw in the video) and Making a custom reservoir (as my pump cant work outta water)
CPU and GPU blocks (Not going for EK will be some ghetto modding stuff)

Next Video will be regarding some looks mod of an air cooler i have.

_______________________________________________________________

Need your help !

As this rad has about 96 joints i dont want to risk my system by putting it on the top of my case. so If u have suggestions about where to put it in the sytem comment down below.
Any suggestion to make the RAD look better ?

_______________________________________________________________

 

 

wow. im surprised it came out looking as good as it did. Im disapointed this series is over. I thought it was great. anyways im excited for the next project

[DIY tech]

3 hours ago, SlipperyPete said:

wow. im surprised it came out looking as good as it did. Im disapointed this series is over. I thought it was great. anyways im excited for the next project

I have one more problem with this RAD that is the joints i used are of iron. So galvanic corrosion will occur in long use and i might have to change the top end once again to a better solution  I should have gone with plastic joints in the first place BTW but i didnt find em here. 

Thanks alot for ur interest buddy