Jump to content

What should I 3d print?

Pcinacan
By Pcinacan
in Hobby Electronics
 Share
Posted

I have a cheap and (kinda) little printer. I was wondering if any one has suggestions for what i should print. I am also thinking about  selling some prints. Where would a good place be to do that? 

 

CPUFX 8320, Motherboard ASUS M5A78L-M/USB3 Socket AM3+ AMD, RAM g.skill ripjaws x series (2x8gb), GPUstrix gtx 970, Storage 500gb + 500gb + 250 ssd, PSU EVGA 600w B 80 PLUS BRONZE, Display(s) ASUS VG248QE 24"+ Hisense 24" + Vizio 24", Cooling Cooler Master Hyper 212 EVO, PC Part Picker  http://pcpartpicker.com/p/LFxQ23

 

Link to comment
https://linustechtips.com/topic/583372-what-should-i-3d-print/
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, GreezyJeezy said:

keychains xD

not a bad idea

 

CPUFX 8320, Motherboard ASUS M5A78L-M/USB3 Socket AM3+ AMD, RAM g.skill ripjaws x series (2x8gb), GPUstrix gtx 970, Storage 500gb + 500gb + 250 ssd, PSU EVGA 600w B 80 PLUS BRONZE, Display(s) ASUS VG248QE 24"+ Hisense 24" + Vizio 24", Cooling Cooler Master Hyper 212 EVO, PC Part Picker  http://pcpartpicker.com/p/LFxQ23

 

Link to comment
https://linustechtips.com/topic/583372-what-should-i-3d-print/#findComment-7611949
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, Ben Potter said:

Our school has a 3D printer and I help manage itarrow-10x10.png. The most printed item: phone cases.

I have wanted to do a phone case but i am too lazy to get my delta arms calibrated and the bed leaved.

 

CPUFX 8320, Motherboard ASUS M5A78L-M/USB3 Socket AM3+ AMD, RAM g.skill ripjaws x series (2x8gb), GPUstrix gtx 970, Storage 500gb + 500gb + 250 ssd, PSU EVGA 600w B 80 PLUS BRONZE, Display(s) ASUS VG248QE 24"+ Hisense 24" + Vizio 24", Cooling Cooler Master Hyper 212 EVO, PC Part Picker  http://pcpartpicker.com/p/LFxQ23

 

Link to comment
https://linustechtips.com/topic/583372-what-should-i-3d-print/#findComment-7611971
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, Ronnie76 said:

a dick

/s

guitar picks are fun

make some $$ on the side

 

Do you know of a good way to make $$

 

CPUFX 8320, Motherboard ASUS M5A78L-M/USB3 Socket AM3+ AMD, RAM g.skill ripjaws x series (2x8gb), GPUstrix gtx 970, Storage 500gb + 500gb + 250 ssd, PSU EVGA 600w B 80 PLUS BRONZE, Display(s) ASUS VG248QE 24"+ Hisense 24" + Vizio 24", Cooling Cooler Master Hyper 212 EVO, PC Part Picker  http://pcpartpicker.com/p/LFxQ23

 

Link to comment
https://linustechtips.com/topic/583372-what-should-i-3d-print/#findComment-7611975
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Pcinacan said:

I have wanted to do a phone case but i am too lazy to get my delta arms calibrated and the bed leaved.

Ah okay. Have you thought about small desk organizers, etc

I'm a blogger, student, and developer. I love re-purposing old hardware such as PCs, routers, and phones. 

Link to comment
https://linustechtips.com/topic/583372-what-should-i-3d-print/#findComment-7611981
Share on other sites
Link to post
Share on other sites
Posted
  • Author

my desk is messy i will give it a try 

 

CPUFX 8320, Motherboard ASUS M5A78L-M/USB3 Socket AM3+ AMD, RAM g.skill ripjaws x series (2x8gb), GPUstrix gtx 970, Storage 500gb + 500gb + 250 ssd, PSU EVGA 600w B 80 PLUS BRONZE, Display(s) ASUS VG248QE 24"+ Hisense 24" + Vizio 24", Cooling Cooler Master Hyper 212 EVO, PC Part Picker  http://pcpartpicker.com/p/LFxQ23

 

Link to comment
https://linustechtips.com/topic/583372-what-should-i-3d-print/#findComment-7611989
Share on other sites
Link to post
Share on other sites
Posted

a rubiks cube? or something like that? 

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...  nothing, it just sits there collecting dust...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to comment
https://linustechtips.com/topic/583372-what-should-i-3d-print/#findComment-7611995
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Bananasplit_00 said:

a rubiks cube? or something like that? 

for some resin my printer does not like to have park just fit so it would be a big pain. 

 

CPUFX 8320, Motherboard ASUS M5A78L-M/USB3 Socket AM3+ AMD, RAM g.skill ripjaws x series (2x8gb), GPUstrix gtx 970, Storage 500gb + 500gb + 250 ssd, PSU EVGA 600w B 80 PLUS BRONZE, Display(s) ASUS VG248QE 24"+ Hisense 24" + Vizio 24", Cooling Cooler Master Hyper 212 EVO, PC Part Picker  http://pcpartpicker.com/p/LFxQ23

 

Link to comment
https://linustechtips.com/topic/583372-what-should-i-3d-print/#findComment-7612003
Share on other sites
Link to post
Share on other sites
Posted

chicken marine! no really, when I and my classmate helped set up a makerbot for the engineering class, the teachers first print, not the typical tea pot, a marine chicken that looked like a rooster in halo style armor.  

                     .
                   _/ V\
                  / /  /
                <<    |
                ,/    ]
              ,/      ]
            ,/        |
           /    \  \ /
          /      | | |
    ______|   __/_/| |
   /_______\______}\__}
Spoiler

[I5-12600k | 32gb DDR5 6000 | RTX5070 | 2x1tb M.2]

 

[Ryzen 5 1600 | 16gb DDR4 3200 | GTX1030 | 4x 8tb HDD] 

 

Link to comment
https://linustechtips.com/topic/583372-what-should-i-3d-print/#findComment-7612007
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Pcinacan said:

for some resin my printer does not like to have park just fit so it would be a big pain. 

if you make one feel free to send it to me and il solve it :P im pretty decent, im a 50ish second solver for the 3x3x3 :P

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...  nothing, it just sits there collecting dust...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to comment
https://linustechtips.com/topic/583372-what-should-i-3d-print/#findComment-7612009
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, GeorgeKellow said:

A phonearrow-10x10.png stand? 

done

 

CPUFX 8320, Motherboard ASUS M5A78L-M/USB3 Socket AM3+ AMD, RAM g.skill ripjaws x series (2x8gb), GPUstrix gtx 970, Storage 500gb + 500gb + 250 ssd, PSU EVGA 600w B 80 PLUS BRONZE, Display(s) ASUS VG248QE 24"+ Hisense 24" + Vizio 24", Cooling Cooler Master Hyper 212 EVO, PC Part Picker  http://pcpartpicker.com/p/LFxQ23

 

Link to comment
https://linustechtips.com/topic/583372-what-should-i-3d-print/#findComment-7612060
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Hobby Electronics

×