[All done] Bitfenix Prodigy water cooled build

[GrossistenDK]

Updated photos system all done 11-07-2013

 

PC

Case: Bitfenix Prodigy Black with side panel window
Motherbord: Asrock Z77E-ITX
CPU: Intel Core i7 3770K
RAM: CORSAIR Dominator Platinum 16GB (2x8GB) PC3 12800
SSD: Samsung PM841 128GB mSATA
Wireless: Intel Centrino Ultimate-N 6300
Grafikcard: XFX Radeon HD 7970 (FX-797A-TNBC)
PSU: Corsair AX760
Cabels: single sleeved Black and silver
Screws: MDPC Black-Oxide

 

Cooling
Radiator 1: Magicool Copper 180mm
Radiator 2: XSPC Crossflow Radiator EX240
Fans: Silverstone Air Penetrators AP181, FN121 and 2x AP122
CPU: Watercool Heatkiller CPU Rev3.0 black Nickel
GFX: Watercool Heatkiller GPU-X³ 79X0 Ni-Bl
Reservoir: EK-Multioption RES X2 - 150 Advanced
Tubing: PrimoChill PrimoFlex Advanced LRT 12,7/9,5mm - Onyx Black
Fittings: EK-PSC Nickel
Pump: Laing D5 Vario + XSPC Acetal Top

 

The systemet is finally donelt. It runs cool and well even in the hot summer weather. Currently I have overclocked the CPU to 4.4GHz and the graphicscard core to 1125MHz and the memory to 1500MHz.

 

[M-ursu]

Looks awesome!

[ERSCreeper]

Looking good

[Morfy]

Very, very nice!

[TRCornishboy]

Always loved these little cases can't wait for more pictures :D

[GuppyTech]

sexy looking build my brother... looking forward to the end product... thanks for sharing

[nickbickerstaff]

looking good bro

[Nit3Rid3R]

Looks interesting, waiting on updates! 

[GrossistenDK]

Update!

 

Todays work on the project. A lot of small fixes and adjustments.

 

 

 

 

 

 

 

Have ordered new parts for the project, hopefully they are here for next weekend.

[liveturbo24]

build looks good so far. keep it up

[MathijsZ77]

I am sooooo jealous!

[Nicktrance]

Looks nice and clean, I like what you did with the PCIe power cables :).

[s0nrise]

Loooks really nice, love it.

[WhatARoaster]

Its looking good mate.

[unidentical]

I'm liking that 180mm rad, don't see a lot of those.

 

Cool beans

[GrossistenDK]

Update!

 

Thanks guys for all the nice comments on my build.

 

This week I got parts to rebuild my heat killer 3.0 CPU block, so that it can be mounted on socket 1155.

 

 

 

 

I have also started on the slow work of sleeving all the cables and make PCIE power cables

 

 

 

 

 

 

 

[godsarmy]

Looks good man

[Homicidium]

What a sexy looking build, mate! 

I'm starting to like the Prodigy more and more.

[MalcolmSex]

Wait a second, I have that board. You can install a mini pcie card on the bottom?

[GrossistenDK]

#20 You can install a mSATA SSD on the bottom, not a mini PCIE card.

[FreyrGauti]

Very cool build, like that you're keeping all the watercooling inside the case instead of modding a shroud on top of it.

[GrossistenDK]

#22 Thank you, it's the idea of my watercooled systems. There is no sense in ruining a nice case.

[GrossistenDK]

Update!

 

 

Here are just some of the things that I have made over the past week.

 

 

 

 

 

 

 

 

Work on the sleeving for the PSU is almost finished and I will upload photos when it is done.

[AraSarkisyan]

░░░░░░░░░▄██████████▄▄░░░░░░░░
░░░░░░▄█████████████████▄░░░░░
░░░░░██▀▀▀▀▀▀▀▀▀▀▀████████░░░░
░░░░██░░░░░░░░░░░░░░███████░░░
░░░██░░░░░░░░░░░░░░░████████░░
░░░█▀░░░░░░░░░░░░░░░▀███████░░
░░░█▄▄██▄░░░▀█████▄░░▀██████░░
░░░█▀███▄▀░░░▄██▄▄█▀░░░█████▄░
░░░█░░▀▀█░░░░░▀▀░░░▀░░░██░░▀▄█
░░░█░░░█░░░▄░░░░░░░░░░░░░██░██
░░░█░░█▄▄▄▄█▄▀▄░░░░░░░░░▄▄█▄█░
░░░█░░█▄▄▄▄▄▄░▀▄░░░░░░░░▄░▀█░░
░░░█░█▄████▀██▄▀░░░░░░░█░▀▀░░░
░░░░██▀░▄▄▄▄░░░▄▀░░░░▄▀█░░░░░░
░░░░░█▄▀░░░░▀█▀█▀░▄▄▀░▄▀░░░░░░
░░░░░▀▄░░░░░░░░▄▄▀░░░░█░░░░░░░
░░░░░▄██▀▀▀▀▀▀▀░░░░░░░█▄░░░░░░
░░▄▄▀░░░▀▄░░░░░░░░░░▄▀░▀▀▄░░░░
▄▀▀░░░░░░░█▄░░░░░░▄▀░░░░░░█▄░░
█░░░░░░░░░░░░░░░░░░░░░░░░░░▀█▄
░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░
█▄░░█ █▀▀█ ▀▀█▀▀░░█▀▀█ █▀▀█ █▀▀▄
█░█░█ █░░█ ░░█░░░░█▀▀▄ █▄▄█ █░░█
█░░▀█ █▄▄█ ░░█░░░░█▄▄█ █░░█ █▄▄▀
░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░
 

[Mightybaal]

I was going to do the exact same rad configuration as you. Dam it now i got to be more creative as i hate being a copy cat. Nice build and great sleeving.