3090 and 5950x low scores

[Kickim]

10 minutes ago, IkeaGnome said:

Sorry, you didn't quote me so I didn't get a notification. 

You see where it says "GPU Perfor..." Just below Fan2, can you click that carrot and open the menu? That "Yes" means something is limiting your performance and the information there will say if it's thermal, power, or it thinks it should be idle.

 

This one is on idle. I might be wrong but the temperature seems a bit high right?

[Kickim]

19 minutes ago, Heliian said:

Have you tried afterburner? 

yes, i also tried afterburner

[IkeaGnome]

20 minutes ago, Kickim said:

This one is on idle. I might be wrong but the temperature seems a bit high right?

If this was right after a stress test, that makes sense. Except for the max load percentage

However, if this wasn't right after a stress test, temps are high and you only got to a max load of 11%.

 

[Heliian]

Yes, it's hot.  I think you have a cooling issue, can you take/post a picture of your setup? 

[Kickim]

3 minutes ago, Heliian said:

Yes, it's hot.  I think you have a cooling issue, can you take/post a picture of your setup? 

 

[Kickim]

This is the log file during furmark benchmark

 

https://gpuscore.top/furmark/show.php?id=335804

GPU-Z Sensor Log 1.txt

[Kickim]

11 hours ago, glenalz81 said:

Have you tried the other Pcie outs from the PSU?

Sorry for the late answer. I also tried a different output but got same performances

[Heliian]

Cool, did you try running it with no side panel?  

 

Those gpu power wires look a little sharply bent. 

[Kickim]

On 4/12/2021 at 1:23 AM, Heliian said:

Cool, did you try running it with no side panel?  

 

Those gpu power wires look a little sharply bent. 

Sorry for not replying. Had busy days. The power wires are fine but I also tried with the aide panel open. Nothing changed.

 

I managed to have a talk with the company who made the pc and they will send a gpu replacement for me today. The only problem now is my cpu. Apparently the scores are below average for that as well

 

[IkeaGnome]

4 minutes ago, Kickim said:

Sorry for not replying. Had busy days. The power wires are fine but I also tried with the aide panel open. Nothing changed.

 

I managed to have a talk with the company who made the pc and they will send a gpu replacement for me today. The only problem now is my cpu. Apparently the scores are below average for that as well

 

Can you post a picture of the motherboard? Maybe there's some cabling or set up that wasn't done quite right. 

[Heliian]

56 minutes ago, Kickim said:

Sorry for not replying. Had busy days. The power wires are fine but I also tried with the aide panel open. Nothing changed.

 

I managed to have a talk with the company who made the pc and they will send a gpu replacement for me today. The only problem now is my cpu. Apparently the scores are below average for that as well

 

Good, the GPU wasn't working properly, I'm glad they'll replace it.  Looking back in the posts, your cpu score is fine, you might even get better scores with a fully functioning system.  Here's hoping it works out!

[Kickim]

On 4/14/2021 at 1:19 AM, Heliian said:

Good, the GPU wasn't working properly, I'm glad they'll replace it.  Looking back in the posts, your cpu score is fine, you might even get better scores with a fully functioning system.  Here's hoping it works out!

Got the new gpu. Still a zotac. It works perfectly fine now with 19000 points in 3dmark. The cpu though not so good. Only 12000 points

https://www.3dmark.com/3dm/60664864

[Kickim]

On 4/14/2021 at 12:25 AM, IkeaGnome said:

Can you post a picture of the motherboard? Maybe there's some cabling or set up that wasn't done quite right.