5600X Hynix DJR overclock help

[Speedbird]

Hello,

 

So I've had my Ryzen 5 5600X running with HyperX Fury 2x8GB with Hynix DJR dies of memory at 3200 MHz, but I thought of pushing it to 3600. I downloaded Ryzen DRAM calculator version 1.7.3, plugged in my details from Thaiphoon and went to input everything in the BIOS, although some settings like tRCPAGE were missing. I booted into Windows and went to run membench in the DRAM calculator, but I got multiple errors. Did I apply some settings wrong, or is my RAM just not capable of going faster than 3200?

My motherboard is a Gigabyte B550 AORUS ELITE V2 with the latest BIOS (F13c). I also have a +200MHz auto OC on the CPU with PBO2 curve optimiser, could that be a problem?

 

Thanks in advance

[Shimejii]

Hynix DJR is quite trash on ryzen, you probably wont be able to get much out of it 

[SupaKomputa]

Ryzen Dram calculator is not very accurate for non samsung chips btw.

[Speedbird]

1 minute ago, SupaKomputa said:

Ryzen Dram calculator is not very accurate for non samsung chips btw.

What should I use instead?

[SupaKomputa]

1 minute ago, Speedbird said:

What should I use instead?

Ask someone with the same chips. Or try higher latency, like 18,19,19,21,38 everything else auto, don't forget to set the ram voltage to 1.37-1.4.

[Grabhanem]

5 minutes ago, SupaKomputa said:

Ask someone with the same chips. Or try higher latency, like 18,19,19,21,38 everything else auto, don't forget to set the ram voltage to 1.37-1.4.

Yep, assuming DJR is like CJR, it'll scale with voltage up to 1.45V or so. You'd probably want to double-check that as I haven't used DJR specifically, but since they're listed the same in DRAM Calc I'd guess they're very similar.

[Speedbird]

14 minutes ago, SupaKomputa said:

Ask someone with the same chips. Or try higher latency, like 18,19,19,21,38 everything else auto, don't forget to set the ram voltage to 1.37-1.4.

Thank you, I was able to get 3600 running with these timings without errors.

[SupaKomputa]

4 minutes ago, Speedbird said:

Thank you, I was able to get 3600 running with these timings without errors.

Nice, test it with memtest86, if fails up the voltage to max 1.45.