Lian-Li O11 Dynamic XL with EK-Quantum Vector Strix RTX 3090

[Cmptr]

I have the regular O11 Dynamic with the EK-Quantum Vector Strix RTX 3090 on an Asus Maximus XII HERO.  I however can not get the side panel on anymore as the terminal protrudes out a bit to much.

 

I was wondering if anything has the O11 Dynamic XL with the EK-Quantum Vector Strix RTX 3090 and is able to get their side panel on.  

[Letgomyleghoe]

If you arent able to, neither are other people.

 

if it's the pcie power cable, there's some low profile pcie power adapters

[For Science!]

I dont know by how much you are off and whether this works with vector blocks, but this may help?https://www.ekwb.com/shop/ek-fc-terminal-rotary-90-black

[Cmptr]

1 hour ago, Letgomyleghoe said:

If you arent able to, neither are other people.

 

if it's the pcie power cable, there's some low profile pcie power adapters

I've got the regular O11 Dynamic, not the XL variant. 

[Cmptr]

1 hour ago, For Science! said:

I dont know by how much you are off and whether this works with vector blocks, but this may help?https://www.ekwb.com/shop/ek-fc-terminal-rotary-90-black

Thank you for finding that.  I was looking for it earlier.  Even if it did fit and allow me to put my side panel on, I wouldn't use it.  It is really ugly and doesn't fit in with the aesthetic of my build.  

[Clintjeh]

Got the exact same problem here, but with a 3080 TUF OC and a EK block

I have ordered the O11-XL, it should be fine with that case 

[HM-2]

This was always an issue with the non-XL dynamic; support for horizontal GPUs, especially water blocked ones, was actually quite poor.

[AdrianAllen]

On 12/6/2020 at 1:55 PM, Clintjeh said:

Got the exact same problem here, but with a 3080 TUF OC and a EK block

I have ordered the O11-XL, it should be fine with that case 

Did it fit in the XL? i just got the xl and the asus strix 3080 idk if its going to fit. Dont wanna take the gpu apart without being sure first

[MaratM]

Just get a raiser cable and mount it vertical!!! It is a simple enough solution. I use 1080ti stryx (and this is one big card) in my o11d vertically mounted. I could of gone with a v-mount kit, but used a hand made bracket instead.

it is a bit dusty, sorry)

[AdrianAllen]

it ended up fitting in the xl barely tho the ports are right at the glass