Jump to content

[SOLVED]Needed: Cisco NSS 324 Firmware and Package File

Fallen Soul
 Share
Posted

Hi All,

My old Cisco NSS 324 had some software issues last night which caused me to do a factory reset.
Despite having to restore all the Data i have lost the MyphAadmin package that was installed.

If any one could assist in tracking down Firmware 3.5 and or the MyphpAdmin package that will work for this NAS that would be good.

 

PID VID:  NSS324 V01
Serial Number: QNP141700U8

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

it goes without saying, if you can then contact cisco. 

any random configs could brick you NAS. 

looks like qnap makes the 3.5 fw the upgrade from the 1.5 on this model. 

i did a bit of hunting. 

I found the following :
https://forum.qnap.com/viewtopic.php?t=58764

At the bottom there this:
For those keen on the old 3.5.0 build, here we go - derived the links using some guessing:

Europe: http://eu1.qnap.com/Storage/TS-259ProTu ... ld0815.zip
US: http://us1.qnap.com/Storage/TS-259ProTu ... ld0815.zip

Europe: http://eu1.qnap.com/Storage/TS-459ProTu ... ld0815.zip
US: http://us1.qnap.com/Storage/TS-459ProTu ... ld0815.zip

Europe: http://eu1.qnap.com/Storage/TS-659ProTu ... ld0815.zip
US: http://us1.qnap.com/Storage/TS-659ProTu ... ld0815.zip

i tested the top link it downloads. Looks legit on first glance.Good luck

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 hour ago, RobinD said:

it goes without saying, if you can then contact cisco. 

any random configs could brick you NAS. 

looks like qnap makes the 3.5 fw the upgrade from the 1.5 on this model. 

i did a bit of hunting. 

I found the following :
https://forum.qnap.com/viewtopic.php?t=58764

At the bottom there this:
For those keen on the old 3.5.0 build, here we go - derived the links using some guessing:

Europe: http://eu1.qnap.com/Storage/TS-259ProTu ... ld0815.zip
US: http://us1.qnap.com/Storage/TS-259ProTu ... ld0815.zip

Europe: http://eu1.qnap.com/Storage/TS-459ProTu ... ld0815.zip
US: http://us1.qnap.com/Storage/TS-459ProTu ... ld0815.zip

Europe: http://eu1.qnap.com/Storage/TS-659ProTu ... ld0815.zip
US: http://us1.qnap.com/Storage/TS-659ProTu ... ld0815.zip

i tested the top link it downloads. Looks legit on first glance.Good luck

 

Thanks Robin,

i will have to give this ago after all my data is transferred back to the NAS drives. If i brick the system i guess it just makes me need to buy a new NAS.

Any luck on finding the MyPhpAdmin package for the cisco firmware. I am currently on firmware version 1.1.0
If i am able to get a hold of this package file then i wont risk the firmware update.

I am surprise i never kept a copy of these things when i originally did it a few years back. Stuff like that i usually keep.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

https://www.cisco.com/en/US/docs/general/Test/rochrist/nss/admin_guide/NSS32X_Admin_Guide_OL_21155_v1.4.pdf


I see in the above guide in just references "You can install the phpMyAdmin package to manage your MySQL server." but it doesn't give version numbers or links.

https://www.phpmyadmin.net/downloads/

https://www.phpmyadmin.net/files/

PHPmyadmin still exists their website seem to have legacy versions all on there (scroll to bottom)

If you know which version then there a good chance. If you don't then you could wing it :/ but "winging it" is not exactly a "best practise" 

I've not used PHPmyadmin , as my experince is all enterprise with this kinda kit and not all that much at that. So can't really give any further advise :(

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
5 minutes ago, RobinD said:

https://www.cisco.com/en/US/docs/general/Test/rochrist/nss/admin_guide/NSS32X_Admin_Guide_OL_21155_v1.4.pdf


I see in the above guide in just references "You can install the phpMyAdmin package to manage your MySQL server." but it doesn't give version numbers or links.

https://www.phpmyadmin.net/downloads/

PHPmyadmin still exists their website seem to have legacy versions all on there (scroll to bottom)

If you know which version then there a good chance. If you don't then you could wing it :/ but "winging it" is not exactly a "best practise" 

Thank you once again, i will have a look around and see what i can do. I also don't want to wing it neither as i would rather keep the $500 - $1000 AUD in my pocket instead of a new NAS

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
44 minutes ago, RobinD said:

Good luck :)

Thanks.

Well positive news. for my version of i looked up the MySql version i was using on my NAS by putting a phpinfo.ini file in the web directory. which then loaded via a web page.

 

so the version i needed was 3.5.1 and once downloaded, extracted and configured i now have access.

 

once again thanks for all your help. i might leave the firmware version for now :)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
On 6/19/2020 at 6:37 AM, RobinD said:

it goes without saying, if you can then contact cisco. 

any random configs could brick you NAS. 

looks like qnap makes the 3.5 fw the upgrade from the 1.5 on this model. 

i did a bit of hunting. 

I found the following :
https://forum.qnap.com/viewtopic.php?t=58764

At the bottom there this:
For those keen on the old 3.5.0 build, here we go - derived the links using some guessing:

Europe: http://eu1.qnap.com/Storage/TS-259ProTu ... ld0815.zip
US: http://us1.qnap.com/Storage/TS-259ProTu ... ld0815.zip

Europe: http://eu1.qnap.com/Storage/TS-459ProTu ... ld0815.zip
US: http://us1.qnap.com/Storage/TS-459ProTu ... ld0815.zip

Europe: http://eu1.qnap.com/Storage/TS-659ProTu ... ld0815.zip
US: http://us1.qnap.com/Storage/TS-659ProTu ... ld0815.zip

i tested the top link it downloads. Looks legit on first glance.Good luck

 

Just tried doing what was said in the article and well poop. I got no where new :P
Doesn't Tell me if it updated or failed 

[/share/Public] # /etc/init.d/update.sh /mnt/HDA_ROOT/update/TS-259_3.5.0_Build0815.img
md5=7fcf2a3c04814d4c6369d9d945c96231
Using 120-bit encryption - (QNAPNASVERSION4)
len=1048576
model name = TS-259
version = 3.5.0
16+0 records in
16+0 records out
3.5.0boot/
bzImage
bzImage.cksum
config/
dmidecode
flashrom
flashrom.img
fw_info
initrd.boot
initrd.boot.cksum
qpkg.tar
qpkg.tar.cksum
rootfs2.bz
rootfs2.bz.cksum
rootfs_ext.tgz
rootfs_ext.tgz.cksum
update/
update_bios.sh
update_check
update_img.sh
tune2fs 1.41.4 (27-Jan-2009)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds

 

Link to comment
Share on other sites
Link to post
Share on other sites
  • 7 months later...
Posted
On 6/18/2020 at 3:37 PM, RobinD said:

it goes without saying, if you can then contact cisco. 

any random configs could brick you NAS. 

looks like qnap makes the 3.5 fw the upgrade from the 1.5 on this model. 

i did a bit of hunting. 

I found the following :
https://forum.qnap.com/viewtopic.php?t=58764

At the bottom there this:
For those keen on the old 3.5.0 build, here we go - derived the links using some guessing:

Europe: http://eu1.qnap.com/Storage/TS-259ProTu ... ld0815.zip
US: http://us1.qnap.com/Storage/TS-259ProTu ... ld0815.zip

Europe: http://eu1.qnap.com/Storage/TS-459ProTu ... ld0815.zip
US: http://us1.qnap.com/Storage/TS-459ProTu ... ld0815.zip

Europe: http://eu1.qnap.com/Storage/TS-659ProTu ... ld0815.zip
US: http://us1.qnap.com/Storage/TS-659ProTu ... ld0815.zip

i tested the top link it downloads. Looks legit on first glance.Good luck

 

The link for the US TS-659 is not working. does anyone know were i can get this 3.5 version?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 hours ago, BadsSgtSlaughter said:

The link for the US TS-659 is not working. does anyone know were i can get this 3.5 version?

Is it the TS659-pro you need?. is so see link below?

https://www.qnap.com/en-uk/download?model=ts-659 pro%2B&category=firmware

note there is a 659 pro, 659 pro ii and a 659 pro + each likely to have different drivers. 

i guessed the URLs last time based on their naming conventions but ive tried a few different guesses and all now say not found or forbidden. I suspect they tidied their backend naming to stop this kinda thing. 

There is hope however...

this active forum guy says their helpdesk might help... log them a ticket n see?
https://forum.qnap.com/viewtopic.php?t=130286

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Servers, NAS, and Home Lab

×