Jump to content

ASUS GTX 1080 TURBO strap resistor layout

Pavlogal
By Pavlogal
in Graphics Cards
 Share
Posted

I have an ASUS P104-100, an especially interesting card because it has video ports unlike other P104-100s and the same PCB as an ASUS GTX 1080 TURBO. But the card is seriously limited by it's BIOS, and even after flashing a 1080 BIOS on it, it doesn't behave like a 1080. In order to convert that card into a 1080 Turbo I need to change the strap transistor layout on my P104 to match the ASUS GTX 1080 TURBO. In case anyone knows what the transistor config is (their location and resistance) on a 1080 TURBO or has some documentation regarding that reply or msg me. If somebody owns a GTX 1080 Turbo send pictures of the front and back PCB it's gonna be easy to determine the location if the resistors can be clearly seen.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, Pavlogal said:

 

Here's the front. I don't have a picture of the rear at hand.

07.jpg

Recent builds:  Meshify C (Zero Tolerance!) & View 37 (Breathable Quad 2080Ti + 2990WX)

Best documented PC coolants

Older Builds

Spoiler

Full-custom loop builds: Meshify C (Full custom loop SLI), Ncase M1(8700K + 1080Ti Full custom loop)  Obsidian 900D (1950X + Quad 1080Ti) & Fractal Define C (1080 in SLI)

Air-cooled builds Air 740D (1920X + Quad 980Ti) & Fractal Define C (Version Air!)

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, For Science! said:

Here's the front. I don't have a picture of the rear at hand.

07.jpg

that was quick thank you, as far as I can see the layout in the front is identical, idk about the resistance as it isn't marked anywhere, it can probably only be found in some form of documentation or somethin

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Could be something in the back

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
9 minutes ago, Pavlogal said:

that was quick thank you, as far as I can see the layout in the front is identical, idk about the resistance as it isn't marked anywhere, it can probably only be found in some form of documentation or somethin

actually I can't see very well, they are TINY and I can barely see them irl so I would need some really high-res picture with good lighting but I can't expect regular people to have that, I don't...

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
21 hours ago, Pavlogal said:

actually I can't see very well, they are TINY and I can barely see them irl so I would need some really high-res picture with good lighting but I can't expect regular people to have that, I don't...

I mean, i could help you out if you highlight exactly where you want a macro shot of since i do have a lens, but i aint bothered to make a panorama and also i dont really want to take the cooler off just for this...

20200222173539__MG_2279-01.jpeg

20200222173535__MG_2278-01.jpeg

Recent builds:  Meshify C (Zero Tolerance!) & View 37 (Breathable Quad 2080Ti + 2990WX)

Best documented PC coolants

Older Builds

Spoiler

Full-custom loop builds: Meshify C (Full custom loop SLI), Ncase M1(8700K + 1080Ti Full custom loop)  Obsidian 900D (1950X + Quad 1080Ti) & Fractal Define C (1080 in SLI)

Air-cooled builds Air 740D (1920X + Quad 980Ti) & Fractal Define C (Version Air!)

 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×