Ryzen 3600 hits 97c at 4.0@1.325V

[balivyta]

So. Noticed that my ryzen 3600 at stock can't boost more than 3.8ghz. Tried to set it at 4.2, like in most tutorials, and it crashed instantly. So, tried step by step. And at 4.0ghz temperatures was at 96-98C after a couple of minutes of benchmark. i even saw a 99C for a second. Stock cooler. Am i doing something wrong, or is it defective cpu?

[Streetguru]

4 minutes ago, balivyta said:

Stock cooler.

Just get like a scythe fuma 2, you need a bigger cooler.

 

also what's your PC case?

[Guest]

The stock cooler isn't good enough for overclocking, it even struggles to keep up at stock settings. Get a better cooler for higher clock rates.

[Ashiella]

My 3900x with a stock cooler, on stock settings regularly hits 94-96c under full load, unfortunately AMD says that 95c is fine, even though all my inner tech fibers are saying its not.

[balivyta]

2 minutes ago, Streetguru said:

Just get like a scythe fuma 2, you need a bigger cooler.

 

also what's your PC case?

Fractal Meshify C

[Streetguru]

2 minutes ago, balivyta said:

Fractal Meshify C

Then ya just pick up a Scythe Fuma 2

 

it's just like the cheapest dual tower cooler.

https://pcpartpicker.com/product/YsHRsY/scythe-fuma-2-5117-cfm-cpu-cooler-scfm-2000

[balivyta]

30 minutes ago, Streetguru said:

Then ya just pick up a Scythe Fuma 2

 

it's just like the cheapest dual tower cooler.

https://pcpartpicker.com/product/YsHRsY/scythe-fuma-2-5117-cfm-cpu-cooler-scfm-2000

it costs 80 euros where i live... a bit pricy... what about Scythe Fuma Rev. B?

[Metallus97]

2 minutes ago, balivyta said:

it costs 80 euros where i live... a bit pricy... what about Scythe Fuma Rev. B?

also fine! Was going to recommend Noctua (best coolers on the market... but wehen a Scythe is already that expensive :O)

 

Cheaper+less perf but should be fine: Cryorig H7

[Streetguru]

8 minutes ago, balivyta said:

it costs 80 euros where i live... a bit pricy... what about Scythe Fuma Rev. B?

What country? That one is basically the same thing I think, just make sure it fits the AM4 socket

[balivyta]

what about hyper 212 evo?

but basicly a cooler wont make my cpu get higher clocks, it just runs cooler, right?

[xg32]

before buying anything, use a -.05v offset and if stable -.1v, 

[Guest]

4 minutes ago, balivyta said:

but basicly a cooler wont make my cpu get higher clocks, it just runs cooler, right?

Actually it does. Ryzen 3000 automatically adjusts clocks with temperature like GPUs do. If you can keep the 3600 under 75 or 70°C you'd get closer to 4.1 or 4.2 Ghz than with your current 90°C

[balivyta]

1 minute ago, xg32 said:

before buying anything, use a -.05v offset and if stable -.1v, 

could you be a more specific about this?

are we talking about bios, or ryzen master?

[xg32]

2 minutes ago, balivyta said:

could you be a more specific about this?

are we talking about bios, or ryzen master?

u could try leaving the clocks on auto, and only thing you do is the negative offset in the bios, then try ryzen master if that doesnt work.

[Streetguru]

14 minutes ago, balivyta said:

what about hyper 212 evo?

but basicly a cooler wont make my cpu get higher clocks, it just runs cooler, right?

You want the biggest cooler you can find, for the lowest price, and that will fit inside your case.

A dual tower cooler is going to run better than a single tower one at the same size, and it has no points of failure that a 240mm AIO would have.
 

 

[Streetguru]

22 minutes ago, balivyta said:

what about hyper 212 evo?

but basicly a cooler wont make my cpu get higher clocks, it just runs cooler, right?

The Neptwin is even cheaper, but you have to contact them for an AM4 bracket I think.
https://pcpartpicker.com/product/3XXfrH/deepcool-cpu-cooler-neptwinv20

[balivyta]

im not sure i won't cover my rams with thos fat coolers

[Columbo]

You basically want a Noctua air cooler or 240mm water cooling or more. 

[balivyta]

On 10/12/2019 at 9:33 PM, xg32 said:

before buying anything, use a -.05v offset and if stable -.1v, 

so i tried this. with -0.1v temps got 10 degrees of, but cpu only boosts to 3.65ghz...

[balivyta]

so a little update. finally got my FUMA2 cpu cooler. and max i can push is 4125mhz @1.45v. temps are around 76C. (4025mhz was with stock cooler). so looks like i got a crappy cpu...