Jump to content

Windows 10 install issue

commanderZiltoid

I am attemtping to install windows 10 and I receive the following error message directly after "copying files" completes:

 

File: \windows\System32\drivers\tcpip.sys

The operating system couldn't be loaded because a critical system driver is missing or contains errors.

already_hate_windows10.thumb.jpg.94ef4969fade5a223c1b17641babd656.jpg

 

 

My hardware is as follows (if more required please feel free to ask):

> Asus sabertooth 990fx mobo
> FX8350 CPU
> XFX RX480 GPU
> Kingston HyperX Predator m.2 pcie g2 x4 solid state drive 240GB

 

I am attempting to install via a usb drive which I purchased and payed almost $200 for specifically to avoid problems like this...lot of good that did.

 

Before install I used dban to wipe windows 7 from the drive to prevent any conflicts.

 

Does anyone have any suggestions? I'm not sure how to proceed at this point. :(

Link to comment
Share on other sites

Link to post
Share on other sites

If you can get to a command prompt via Startup Repair try this:

Trouble Shoot -> Advanced Options -> Command Prompt

CMD> bootrec /scanos

CMD> bootrec /rebuildbcd

CMD> bootrec /fixmbr

CMD> bootrec /fixboot

Reboot.

Current Build

Successful Builds

Spoiler
Spoiler

 

Link to comment
Share on other sites

Link to post
Share on other sites

Can you show us what appears under the part of the installation where you choose the drives?

I edit my posts a lot.

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, MrDrWho13 said:

Can you show us what appears under the part of the installation where you choose the drives?

I'm afraid it doesn't get that far. I insert the windows 10 usb drive, power on the pc, go into my boot menu and select the drive, a screen appears and says copying files, then once it completes I receive the screenshot in my original post. For a brief moment (half a second or less) the windows 10 icon will display before showing that screenshot.

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, commanderZiltoid said:

I'm afraid it doesn't get that far. I insert the windows 10 usb drive, power on the pc, go into my boot menu and select the drive, a screen appears and says copying files, then once it completes I receive the screenshot in my original post. For a brief moment (half a second or less) the windows 10 icon will display before showing that screenshot.

Hm I would stick the drive in another computer and reformat it.

I edit my posts a lot.

Link to comment
Share on other sites

Link to post
Share on other sites

Try installing on a standard SATA drive, not a M.2

Try using a different USB port, like one from the back of the board.

And paying $200 was for the retail license, which comes with a key card.

Intel Xeon E5 1650 v3 @ 3.5GHz 6C:12T / CM212 Evo / Asus X99 Deluxe / 16GB (4x4GB) DDR4 3000 Trident-Z / Samsung 850 Pro 256GB / Intel 335 240GB / WD Red 2 & 3TB / Antec 850w / RTX 2070 / Win10 Pro x64

HP Envy X360 15: Intel Core i5 8250U @ 1.6GHz 4C:8T / 8GB DDR4 / Intel UHD620 + Nvidia GeForce MX150 4GB / Intel 120GB SSD / Win10 Pro x64

 

HP Envy x360 BP series Intel 8th gen

AMD ThreadRipper 2!

5820K & 6800K 3-way SLI mobo support list

 

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, commanderZiltoid said:

I'm afraid it doesn't get that far. I insert the windows 10 usb drive, power on the pc, go into my boot menu and select the drive, a screen appears and says copying files, then once it completes I receive the screenshot in my original post. For a brief moment (half a second or less) the windows 10 icon will display before showing that screenshot.

wait how are you using an m.2 drive in an AM3+ motherboard?

Current Build

Successful Builds

Spoiler
Spoiler

 

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, MrDrWho13 said:

Hm I would stick the drive in another computer and reformat it.

I bought the drive pre-loaded with windows 10, and don't have an iso to reformat it with. I suppose I could find one though. I may try putting the drive in another pc and seeing if I can get past that error. That would tell me it's something with my machine and not the drive.

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, commanderZiltoid said:

I bought the drive pre-loaded with windows 10, and don't have an iso to reformat it with. I suppose I could find one though. I may try putting the drive in another pc and seeing if I can get past that error. That would tell me it's something with my machine and not the drive.

Where did you buy this preloaded drive? I would reinstall and use your licence key from the retail package as mentioned. You might have an install disc or might need to burn a new one on another pc.

I edit my posts a lot.

Link to comment
Share on other sites

Link to post
Share on other sites

8 minutes ago, Gungpae said:

where is it plugged into?

A pcie port. Second one down from the top of that board, underneath my gpu.

Link to comment
Share on other sites

Link to post
Share on other sites

8 minutes ago, MrDrWho13 said:

Where did you buy this preloaded drive? I would reinstall and use your licence key from the retail package as mentioned. You might have an install disc or might need to burn a new one on another pc.

I purchased it off of newegg: https://www.newegg.com/Product/Product.aspx?Item=N82E16832588529&cm_re=windows_10_thumb_drive-_-32-588-529-_-Product

Link to comment
Share on other sites

Link to post
Share on other sites

I have confirmed it is the usb drive. I attempted the install in another machine, and it had the same issue. Does anyone have a link to where I can download windows 10 pro 64bit iso? Like a legit link? I've been stumbling around the micro$oft site, but sh!ts confusing.

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, commanderZiltoid said:

I have confirmed it is the usb drive. I attempted the install in another machine, and it had the same issue. Does anyone have a link to where I can download windows 10 pro 64bit iso? Like a legit link? I've been stumbling around the micro$oft site, but sh!ts confusing.

https://www.microsoft.com/en-us/software-download/windows10

Current Build

Successful Builds

Spoiler
Spoiler

 

Link to comment
Share on other sites

Link to post
Share on other sites

Just to be sure : Does your board have UEFI BIOS ?

CPU : Core i7 6950X @ 4.26 GHz + Hydronaut + TRVX + 2x Delta 38mm PWM
MB : Gigabyte X99 SOC (BIOS F23c)
RAM : 4x Patriot Viper Steel 4000MHz CL16 @ 3042MHz CL12.12.12.24 CR2T @1.48V.
GPU : Titan Xp Collector's Edition (Empire)
M.2/HDD : Samsung SM961 256GB (NVMe/OS) + + 3x HGST Ultrastar 7K6000 6TB
DAC : Motu M4 + Audio Technica ATH-A900Z
PSU: Seasonic X-760 || CASE : Fractal Meshify 2 XL || OS : Win 10 Pro x64
Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, agent_x007 said:

Just to be sure : Does your board have UEFI BIOS ?

It does. The second machine I tested it in does not.

Link to comment
Share on other sites

Link to post
Share on other sites

Awesome :)
Now you only need to mod it for NVMe booting to work properly.
Here's a guide for that : LINK.
I assume, you are running EFI startup and GPT drive ?

CPU : Core i7 6950X @ 4.26 GHz + Hydronaut + TRVX + 2x Delta 38mm PWM
MB : Gigabyte X99 SOC (BIOS F23c)
RAM : 4x Patriot Viper Steel 4000MHz CL16 @ 3042MHz CL12.12.12.24 CR2T @1.48V.
GPU : Titan Xp Collector's Edition (Empire)
M.2/HDD : Samsung SM961 256GB (NVMe/OS) + + 3x HGST Ultrastar 7K6000 6TB
DAC : Motu M4 + Audio Technica ATH-A900Z
PSU: Seasonic X-760 || CASE : Fractal Meshify 2 XL || OS : Win 10 Pro x64
Link to comment
Share on other sites

Link to post
Share on other sites

7 minutes ago, agent_x007 said:

Awesome :)
Now you only need to mod it for NVMe booting to work properly.
Here's a guide for that : LINK.
I assume, you are ruinning EFI startup and GPT drive.

Can you explain to me why I would need to do this if the drive didn't work in either motherboard? One UEFI and one Non-UEFI. I have also installed windows 7 on the machine in question via usb twice in the past.

 

Not sure what "EFI startup and GPT drive" are?

Link to comment
Share on other sites

Link to post
Share on other sites

NVMe drive boot requires EFI booting to work.
EFI booting for Windows works only on GPT drives.

NVMe for non-UEFI motherboards :
If Motherboard doesn't have UEFI BIOS, you need 3-rd party software (Clover/DUET) to bypass this limitation (with few other bits and bobs).

NVMe for UEFI boards before Z97 :
UEFI BIOS doesn't have a nvmexpress booting code inside, which enables seeing NVMe as bootable drive under EFI mode.
Without it, even IF you install Windows, you will not have a disk available to boot from (it simply won't be available in booting options).

You can use WIndows 7 because it works by default on Legacy mode.
Windows 8/8.1/10 can use EFI booting or UEFI-CSM as default (depending on UEFI/BIOS boot settings).
They do support Legacy booting as well.
 

EFI booting example : 
BIOS_Boot.jpg
"Windows Boot Manager" is a option you should pick instead of Windows bootable GPT drive.

CPU : Core i7 6950X @ 4.26 GHz + Hydronaut + TRVX + 2x Delta 38mm PWM
MB : Gigabyte X99 SOC (BIOS F23c)
RAM : 4x Patriot Viper Steel 4000MHz CL16 @ 3042MHz CL12.12.12.24 CR2T @1.48V.
GPU : Titan Xp Collector's Edition (Empire)
M.2/HDD : Samsung SM961 256GB (NVMe/OS) + + 3x HGST Ultrastar 7K6000 6TB
DAC : Motu M4 + Audio Technica ATH-A900Z
PSU: Seasonic X-760 || CASE : Fractal Meshify 2 XL || OS : Win 10 Pro x64
Link to comment
Share on other sites

Link to post
Share on other sites

30 minutes ago, agent_x007 said:

NVMe drive boot requires EFI booting to work.
EFI booting for Windows works only on GPT drives.

NVMe for non-UEFI motherboards :
If Motherboard doesn't have UEFI BIOS, you need 3-rd party software (Clover/DUET) to bypass this limitation (with few other bits and bobs).

NVMe for UEFI boards before Z97 :
UEFI BIOS doesn't have a nvmexpress booting code inside, which enables seeing NVMe as bootable drive under EFI mode.
Without it, even IF you install Windows, you will not have a disk available to boot from (it simply won't be available in booting options).

You can use WIndows 7 because it works by default on Legacy mode.
Windows 8/8.1/10 can use EFI booting or UEFI-CSM as default (depending on UEFI/BIOS boot settings).
They do support Legacy booting as well.
 

EFI booting example : 
"Windows Boot Manager" is a option you should pick instead of Windows bootable GPT drive.

Thank you for bringing this to my attention! Probably saved me another panic attack.

Link to comment
Share on other sites

Link to post
Share on other sites

No problem :)
Good luck.

CPU : Core i7 6950X @ 4.26 GHz + Hydronaut + TRVX + 2x Delta 38mm PWM
MB : Gigabyte X99 SOC (BIOS F23c)
RAM : 4x Patriot Viper Steel 4000MHz CL16 @ 3042MHz CL12.12.12.24 CR2T @1.48V.
GPU : Titan Xp Collector's Edition (Empire)
M.2/HDD : Samsung SM961 256GB (NVMe/OS) + + 3x HGST Ultrastar 7K6000 6TB
DAC : Motu M4 + Audio Technica ATH-A900Z
PSU: Seasonic X-760 || CASE : Fractal Meshify 2 XL || OS : Win 10 Pro x64
Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×