Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Thermaltake core wpp200 water cooled quad loop

Recommended Posts

Posted (edited) · Original PosterOP

so what was the point in having 2 pcs? well i do not like windows 10 and ill have to use windows 10 at some point for the directx 12. so windows 10 on game pc and windows 7 on my other pc. (edit 8/13/2019 i got a windows 10 laptop and tried to install windows 7 on it but had no luck as its uses nvme drives... so i was forced to use windows 10 but i found ways of disabling most of the stuff for now....) making this whole build pointless....oh well


i was going to use two be quiet dark base pro 900 cases as you can swap the insides so i have access to both pcs. and i got a thermaltake core p 200 that i was going to put the two cases on it but did not have a top so ied have to make one. then i decided having 3 peaces for water cooling was not going to work so i did end up buying the thermaltake core w 200 case what i should have done in the first place.




Pc 1 gaming:

cpu: skylake 1151 i5 6600k (in case i want to over clock)

Gpu: msi gtx 780 lighting (updated to a gigabit win force 1070 g1)

mb: Gigabyte z170-hd3-cf (in case i want to over clock) (updated to a asus tuf z270 mb)

Psu: old xfx 850 (updated to a sea sonic focus gold 550fx)

ssd: Mushkin MKNSSDE3480GB Eco3 480 Gb

ram: Corsair ddr4 -2132 dominate platinum 16gb (just in case later fined out 8gb is good enuff)

Storage: 2x 4tb wd green hhd


Pc 2: surfing the net, Netflix, music

Cpu: i7 920 1366 2.66

Gpu: gigabyte win force gtx 760 for now i might find another gpu with water block  and use the 760 on another pc.

mb: asus rampage 2 extreme

Psu: non i sold my other one....(stupid me):( (updated to old xfx 850)

Hdd: Wd velociRaptor 150 gb

ram: 6gb gskill ram ( update only 4 gig out of 6 work 1 slot broken on mb... )




Have to sell the two dark base pro cases (both sold at a loss)



My pc right now



Edited by thrasher_565
Link to post
Share on other sites

Motherboard looks tiny inside that case lol

We have a NEW and GLORIOUSER PSU Tier List Now.


You can check out the old one that gave joy to so many across the land here


Computer having a hard time powering on? Troubleshoot it with this guide. (Currently looking for suggestions to update it into the context of <current year> and make it its own thread)

Computer Specs:


 Mathresolvermajig: Intel Xeon E3 1240 (Sandy Bridge i7 equivalent)
Framepainting-inator: MSI RX 480 Gaming X 8GB Died in a horrible mining accident. Currently looking for used Vega 56s!

Attachcorethingy: GA-H61M-S2V-B3

Infoholdstick: Corsair 2x4GB DDR3 1333 CAS 9

Computerarmor: CM Elite 360 (Moddded to all hell by now)

Rememberdoogle: 120GB Trion 150 + 1TB WD RE+ + 240GB SSD Plus

AdditionalPylons: Corsair CX450M

Letterpad: Rosewill Apollo 9100 (Cherry MX Red)

Buttonrodent: EVGA Torq X3

Auralnterface: @Den-Fi が2年前にくれたヘッドフォン

Liquidrectangles: AOC G2260VWQ6 (Freesync 75Hz), Samsung SMB2030N (1600x900 VGA)

Brother's Computer:


Mathresolvermajig: Intel i3-2100 (carry over from my old build)
Framepainting-inator: GTX 650 Ti

Attachcorethingy: Intel Z68 (don't know anything else, got it from ebay for like $40)

Infoholdstick: Corsair 2x2GB 1333MHz C9

Computerarmor: Ashamed to say

Rememberdoogle: 120GB SP550 + 500GB 2.5" from a laptop

AdditionalPylons: Antec Basiq BP350 (not as loud as @STRMfrmXMN says it is) (actually pretty loud for my standards)

Letterpad: Logitech MK120 bundle

Buttonrodent: See above

Auralnterface: Hah! You wish

Liquidrectangles: Samsung 1600x900 + LG 1440x900

Link to post
Share on other sites
2 minutes ago, Energycore said:

Motherboard looks tiny inside that case lol

Yea it looks like a ram stick in a mid tower case...

Mark 16: 15

“And He said to them, ‘Go into all the world and preach the gospel to every creature.'”


My Rig:

CPU: R7 1700 OC to 3.8 

MOBO: Asrock ab350 Pro4

RAM: 8gb (2x4) Corsair 2666 ddr4 @2800

STORAGE: 1tb Toshiba HDD; 120 GB Toshiba SSD

GPU: GTX 980ti hybrid


PERIPHERALS: Logitech G910, G930; G602; LG 29in Ultrawide, Toshiba 28in TV; Water Dancing Speakers




Other Devices:

Asus Chromebook C201

Samsung Galaxy S8

Xbox 360

Xbox One S

Nintendo Switch

Link to post
Share on other sites
Posted (edited) · Original PosterOP
On 7/10/2017 at 9:35 PM, Energycore said:

Motherboard looks tiny inside that case lol

ya i did not no it was a micro mb at the time. some time's it better to just save up for what you want then having to buy what you need later on. i wanted an tuf heat shield mb (did end up buying a z270 tuf mark 1 but i really want the z170 mark 1 just for that 40mm fan...call me crazy...)

Edited by thrasher_565
Link to post
Share on other sites

For a moment, I couldn't find the motherboard ... Haha. Was actually wondering why is there a cooler but but motherboard. :P


[CPU] i5-4690K @ 4.5GHz with NZXT Kraken X61 [MOBO] Asus Z97-AR [Memory] HyperX Fury 32GB DDR3-1600 [Storage] Samsung 840 EVO 500GB & WD 1TB Black & Hitachi 1TB [GPU] Gigabyte GTX 1080 8GB Xtreme Gaming [Case] Corsair Air 540 [PSU] Cooler Master V1000 [Case Fan] Corsair SP140 LED Fan x 3 & SP120 LED Fan x 3 [Display] Main: Philips 31.5" FULL HD IPS | Side: Philips 28" 4K UHD [Keyboard] Razer Blackwidow Ultimate Stealth Edition [Mouse] Razer Ouroboros [Mouse Pad] Razer Firefly [Sound] BOSE Companion 5 Multimedia Speaker System


Link to post
Share on other sites
Posted (edited) · Original PosterOP
On 7/10/2017 at 9:39 PM, VolkA said:

For a moment, I couldn't find the motherboard ... Haha. Was actually wondering why is there a cooler but but motherboard. :P

here was my old water cooled pc look. i cheaped out on fitting and well i should have just gotten the 90 degree fittings. the koolance fan controler and what not i fried when i got an upgrade for it... v1 dose not go with v2.... up in smoke $200







sad that i dont have a pic of the rads but i had 2 360 rad both with 6 fans and 3 shrouds for push pull.

Edited by thrasher_565
Link to post
Share on other sites
Posted (edited) · Original PosterOP



so first off why the hell not to polish the back? real high quality my ass.O.o

second i was going to add an 5mm led stopper on the back...but its g1/8 threaded.... and i did spend $20 for 4x plugs that i cant use.

if i do what to use em ied have to get an g1/8 to g1/4 thread adapter and spend even more money (taxe, shipping, border fees, ass fees...):|







Edited by thrasher_565
Link to post
Share on other sites
Posted · Original PosterOP



never mind trying to find the rare as balls g1/8 led stop they advertise with... (edit i found them and got 4 of them but don't have the g1/8 to g1/4)


and how do i empty it? if i want to do it with an tube ied first have to buy the 4x adapter then buy another 4x $15 valve's and most like need a male to male thread adapter on the valve .... on and on and on



Link to post
Share on other sites
Posted (edited) · Original PosterOP

and it may be cool but how do you mount it is another problem.







i guess this is the best way for now. ill just have to mount one pump on the 2 hole plate and put the psu in the pedestal?  would need psu extetions too. but then ied have to mount the rads in the case. it would be a shame to cover up the nice rads thow... im trying to make it so i can just open an valve and have all or most of the water flow out.


would mounting the rads in the case make this a problem? i do no that the drain port has to be at the lows point and all the liquid would need a way to flow downward. any tips would be nice plz and thx



Edited by thrasher_565
Link to post
Share on other sites
Posted · Original PosterOP

Making an much need cut.



Geting rid of that stupid bar that block's your HDD rods.



This ones on the pedestal.





Drill out the rivets




Drilled 120mm holes for rad. 8 out of the 12 screws should be ok...




Link to post
Share on other sites
Posted (edited) · Original PosterOP



G1/4 5mm led stopper with rgb led




G1/8 5mm led stopper with rgb led





Gtx 780 msi lighting with ek water block probably going to sell it and get a 1070 (sold them at a loss)






Rads mounted in the case




Be quiet shadow wings sw1 says 300,000 hours about 23 years or 6 year warranty Weill see...




4X 4pin to 3 pin pwm (converts 3 pin fans in to pwm)


2X 10 fan hub uses pwm and rpm form mb and molex for power




20 led power molex don't no if i will use it and i would need 3 more...




g1/4 pump (think you can use it to suck water out and get it flowing?

g1/4 funnel

4X g1/4 ball vale

g1/4 long panel mount

g1/4 t




1/2 male to male t y 90






should be all the fittings i need.... (edit nope got even more fittings...)




flow meter (gona sell em now as i have rgb ones....)




4X g1/8 5mm led stops

10X g1/4 5mm led stop

22 gadge wire

5mm orange led

5mm rgb led

orange barb orings

orange dust caps

ganaric 4 pin (should work thow)

5X g/14 tip prob stoppers

pci digital out (might mod it to work with my mb since it did not come with one but dose support it )




fans mounted to the rad what fun that was....not. because of there stupid gray rubber around the fan you cant put them agents each other so i had to use nuts to off set it... stupid








the 120mm shrouds have 4x 5mm led holes i might attempt to put rgb leds in but i sux a soldering. i have an idea to use a ribbing cables  like ide cables.



other mods i was thinking of are a volt meter and an rpm meter but don't no how i would do it. was think of a toggle swiich to select what part i want to read out so having 1 volt meter and 1 rpm meter for everything. i did order a black 2 slot pci from mouton mods  but have not got it yet. want to do a vertical gpu. other mods was to make my own dust cover out of plexy glass and use standoff to mount it. then use thermaltakes 16x pcie extension and a 16x 90 riser but that's a lot of money haha weill see. 


Edited by thrasher_565
Link to post
Share on other sites
Posted (edited) · Original PosterOP


Two pedestals!


kinda how its going to look


Gpu mount form Mouton mods


gpu water block


(at this point you like hey was there not a mb water block on there?) you would be right and no i didn't take it off. so at some point i got a cheap 1366mb and my dad got the asus rampage extreme 2 mb and he got a 960 i got the 920 he also got the good corsair donators gt (or the ones that you can add a water block to) i got cheap gskills ram that i rip the heat sink off and out killer therm alright heat sinks on...kuz why not.attaching an 120mm fan to your ram not crazy..... anyway we were rebuilding my pc and spilled water on it and killed it.... so my dad when on ebay and got another asus rampage extreme 2 mb for me so we both have the same mb. well i ended up putting a water block on mine and my dad just added a water block to the north bridge. later on he was doing something with a gpu heat sink and shorted 2 ram slots on his mb so he got another asus rampage extreme 2 mb but never got around to testing it as he just upgraded. so at this point we have 3 asus rampage extreme 2 mb's well the one he got to replace his alo has 1 ram slot broken the one in this pic that hes no mb water block on it as i said before i was done with water cooling and traded my water cooled mb for his air cool one (but he dint no the ram slow was broken) so since i have 4 pumps and only 3 blocks i might get my water cooled mb back form my dad the one that has all ram slots working. confusing i no haha now to  convince my dad  to trade the water cooled ram......that's another story haha


kinda how its going to look. still have to move one of the res and wating on some 90 mounts to mount the gpu bracket the cable is kinda long...oh well. i might put a 90 on it. i have another mod i want to do is a dust shield out of plexiglass that will cover the the mb. kinda like the mark 1 tuf mb but poor mans way. also have some ideas on mounting fans to it or on the side to channel air around..

Edited by thrasher_565
Link to post
Share on other sites
Posted · Original PosterOP

new changes! started over.... nor res new pump mount trying to figer out the leds.

pc update 003.jpg




psu to control all the leds with 1 button so i can sleep at night!



Shit ton of corsair hd 120 refurbished (saved $10 a set of 3)




pc 2 side no window side so don't really care how it looks i might make it look better down the road. all the fan wires will go thou this side.




changed were the pedestals are so both on top.








i should have gotten a quad rad...




kinda layout for the fan lighting.




got some generic pwm 10 fan hubs but found out only 1 fan is controlled buy the cpu motherboard making it just a hub at full power... really bad marketing. so ill just have to wire up my own.






don't buy!




Link to post
Share on other sites
Posted · Original PosterOP

might do the power with terminals we will see. (pic not mine just for the idea.)




waiting on china to ship the dam 4 pin pwm extensions... and some zip tiy mounts so i can finisher drilling holes for the rgb strip... sight been like 85 days of waiting...





Link to post
Share on other sites
Posted · Original PosterOP

 so it began. i had a commander pro with 2x 3 pin cables....but i need 5...so i was like well ill make my own.




part 1 buying every cable no wen to man.




20 mints with crimping and soldering i got 1 wire done... this was not going to work i suck balls!



part 2 buying every combo of DuPont connector out there...EVERY ONE!


I got 1 pin male to male / 1 pin  female to female / 1pin female to male / 3 pin male to male / 4 pin female to female / 1 pin pre terminal male to male / 1 pin pre terminal fe male to female / 1 pin pre terminal male to female  so i can just at the housing to them no crimping needed! which would have worked but how do you keep the plugged in to the lighting hub and commandeer pro and node pro. Gule? maybe build up a bump with nail polish? i just might cut of the 3 pin off of the 3 button controller that all the corsair fans come with. what a wast of money...but i can use some of the DuPont for leds for my pc and other project like Nintendo systems...might post a build log of that.





Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now