Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
GimmeGaming

Little Devil - Watercooled Build

Recommended Posts

Posted · Original PosterOP

<a href="//imgur.com/a/zuc3k">My pc</a>

I've been working on and off with this pc for a while now, finally getting it so that its looking someway decent.

 

Specs for the moment are:

3820

32gb ram

7970's in CF running 3 28" screens

ax1200 watt psu

128gb Samsung 840 pro

3 * 2tb drives

A tonne of watercooling Gear :)

Little Devil Rig

 

 

I will be upgrading to a 4930k and (2 * 290x's or 2 * 780tis watercooled) in the january/February.

 

I started to watercool my rig and this is some of the progress

Just added most of the new fittings to my loop and redid the layout. I now have the front drive bay res connected and connected to a fill port on the case to make filling the machine easier.

All these are before I filled the loop. As soon as I pick up two ram blocks and bitspower extensions I have more 90deg fittings ready to make the loop look nicer.
IMG_0647_zps60172bfa.jpg
IMG_0644_zpsf7a1ad8c.jpg
IMG_0651_zps3c1d20bf.jpg

Lower quality pic of it filled
20130813_000553_zps9bfa92c9.jpg
20130813_000624_zps1b492996.jpg
20130813_000638_zpsd4cf6513.jpg


pretty poor quality video but you can see what the dye is like (front res is not filled fully yet)

th_20130813_000646_zps33eda72c.jpg


I will be spraying all the inside of the case black as at the moment there is too much red and I will be doing the typhoons in white as I think the grey is ruining the look of the build.

Few more updates as nearly finished it bar the normal upgrades gpu/cpu etc.
I finally got the memory blocks and most of the last of the fittings I need.
I've ordered the final bits from a place called highflow in netherlands which are mostly extenders to raise the level of the cpu/motherboard blocks up to the level of the memory blocks and a t fitting so I can remove the front drive bay res.



20131108_080737_zpsd3942ca4.jpg

20131107_191845_zps022d28dd.jpg

20131107_191850_zps42efd832.jpg

Finally the parts arrived, my measurements where off again so I had to alter the route slightly but it seems okay. The part on the bottom of the right ram block will be crystal link when I replace all fittings with crystal link.
Oh and the last pics are from my sisters pc i'm building wink.png

20131120_184455_zpsce3e7fc0.jpg

20131121_080039_zps15802a28.jpg

20131121_080033_zpsb0862b7a.jpg

20131121_080018_zpsa68206df.jpg

20131121_075955_zps179d018f.jpg

20131121_011703_zps3706ee46.jpg

20131121_011652_zpse7e6dd59.jpg



This is what its looking like now


20131122_003425_zps583b1288.jpg
 


 
My Irish Machine: CPU: AMD Threadripper 1950x cooled by a Custom Watercooling Loop| CASE: Little Devil V10 | MOBO: Asus Zenith Extreme RAM: 32GB DDR4 G.Skill 3200mhz ram | GPU: Nvidia Gtx 1080 PSU: Corsair AX1200 with custom white sleeved Cables  SSD's: 500gb Samsung 970 Pro & 960GB Intel SSD | Monitors: Dual 32" 1440p monitors | Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset

 

| Pics of my rig |

 

My German Machine: CPU: AMD 3950x cooled by a Custom Watercooling Loop| CASE: Phantek Evolv X | MOBO: X570 Gigabyte Auros Extreme RAM: 32GB DDR4 G.Skill 3600mhz ram | GPU: Nvidia Rtx 2080 PSU: Corsair RM1000x SSD's: 1Tb Adata XPG SX8200 Pro & 2Tb Adata XPG SX8200 Pro | Monitors: 34" Acer Predator| Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset
   

| Pics of my rig |

 

Link to post
Share on other sites

Oh man that looks so nice! 


[CPU: AMD FX-6100 @3.3GHz ] [MoBo: Asrock 970 Extreme4] [GPU: Gigabyte 770 OC ] [RAM: 8GB] [sSD: 64gb for OS] [PSU: 550Watt Be Quiet!] [HDD: 1TB] [CPU cooler: Be Quiet! Shadow Rock Pro Sr1]  -Did i solve your question/problem? Please click 'Marked Solved'-

Link to post
Share on other sites

Good build, although I like it how its called little devil yet its the most biggest friken thing you've ever seen lol 

Link to post
Share on other sites
Posted · Original PosterOP

Thanks for the replies :). The case is actually called "Little Devil"


 
My Irish Machine: CPU: AMD Threadripper 1950x cooled by a Custom Watercooling Loop| CASE: Little Devil V10 | MOBO: Asus Zenith Extreme RAM: 32GB DDR4 G.Skill 3200mhz ram | GPU: Nvidia Gtx 1080 PSU: Corsair AX1200 with custom white sleeved Cables  SSD's: 500gb Samsung 970 Pro & 960GB Intel SSD | Monitors: Dual 32" 1440p monitors | Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset

 

| Pics of my rig |

 

My German Machine: CPU: AMD 3950x cooled by a Custom Watercooling Loop| CASE: Phantek Evolv X | MOBO: X570 Gigabyte Auros Extreme RAM: 32GB DDR4 G.Skill 3600mhz ram | GPU: Nvidia Rtx 2080 PSU: Corsair RM1000x SSD's: 1Tb Adata XPG SX8200 Pro & 2Tb Adata XPG SX8200 Pro | Monitors: 34" Acer Predator| Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset
   

| Pics of my rig |

 

Link to post
Share on other sites

Thanks for the replies :). The case is actually called "Little Devil"

who makes the case? that thick 480 rad in the roof is a beast B) !


Rig Specs:

AMD Threadripper 4999WX@4.8Ghz

Asus Zenith III Extreme

Sapphire 6900XXXT Quadfire

G.Skill Ripheartout X OC 5000Mhz C12 DDR4 4X8GB  

Super Flower Power Leadex 2000W Psu's X2

Harrynowl's 775/771 OC and mod guide: http://linustechtips.com/main/topic/232325-lga775-core2duo-core2quad-overclocking-guide/ http://linustechtips.com/main/topic/365998-mod-lga771-to-lga775-cpu-modification-tutorial/

ProKoN haswell/DC OC guide: http://linustechtips.com/main/topic/41234-intel-haswell-4670k-4770k-overclocking-guide/

 

"desperate for just a bit more money to watercool, the titan x would be thankful" Carter -2016

Link to post
Share on other sites
Posted · Original PosterOP

who makes the case? that thick 480 rad in the roof is a beast B) !

http://www.ldcooling.com/

This is one of the cases

http://www.ldcooling.com/shop/atx-hptx/73-ld-pc-v8-atx-hptx-black-red.html

LD cooling make it :)

 

Costs a fortune but its worth it for the cooling options :)


 
My Irish Machine: CPU: AMD Threadripper 1950x cooled by a Custom Watercooling Loop| CASE: Little Devil V10 | MOBO: Asus Zenith Extreme RAM: 32GB DDR4 G.Skill 3200mhz ram | GPU: Nvidia Gtx 1080 PSU: Corsair AX1200 with custom white sleeved Cables  SSD's: 500gb Samsung 970 Pro & 960GB Intel SSD | Monitors: Dual 32" 1440p monitors | Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset

 

| Pics of my rig |

 

My German Machine: CPU: AMD 3950x cooled by a Custom Watercooling Loop| CASE: Phantek Evolv X | MOBO: X570 Gigabyte Auros Extreme RAM: 32GB DDR4 G.Skill 3600mhz ram | GPU: Nvidia Rtx 2080 PSU: Corsair RM1000x SSD's: 1Tb Adata XPG SX8200 Pro & 2Tb Adata XPG SX8200 Pro | Monitors: 34" Acer Predator| Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset
   

| Pics of my rig |

 

Link to post
Share on other sites

http://www.ldcooling.com/

This is one of the cases

http://www.ldcooling.com/shop/atx-hptx/73-ld-pc-v8-atx-hptx-black-red.html

LD cooling make it :)

 

Costs a fortune but its worth it for the cooling options :)

:wacko: expensive. it is massive and custom though, and i suppose you probably won't see many other people with the same case. 


Rig Specs:

AMD Threadripper 4999WX@4.8Ghz

Asus Zenith III Extreme

Sapphire 6900XXXT Quadfire

G.Skill Ripheartout X OC 5000Mhz C12 DDR4 4X8GB  

Super Flower Power Leadex 2000W Psu's X2

Harrynowl's 775/771 OC and mod guide: http://linustechtips.com/main/topic/232325-lga775-core2duo-core2quad-overclocking-guide/ http://linustechtips.com/main/topic/365998-mod-lga771-to-lga775-cpu-modification-tutorial/

ProKoN haswell/DC OC guide: http://linustechtips.com/main/topic/41234-intel-haswell-4670k-4770k-overclocking-guide/

 

"desperate for just a bit more money to watercool, the titan x would be thankful" Carter -2016

Link to post
Share on other sites

Danggg. That is awesome!


Main Rig: -FX8150 -32gb Kingston HyperX BLUE -120gb Kingston HyperX SSD -1TB WD Black -ASUS R9 270 DCUII OC -Corsair 300r -Full specs on Profile


Other Devices: -One Plus One 64gb Sandstone Black -Canon T5 -Moto G -Pebble Smartwatch -Nintendo 2DS -G27 Racing Wheel


#PlugYourStuff - 720penis - 1080penis - #KilledMyWife - #LinusButtPlug - #HashtagsAreALifestyle - CAR BOUGHT: 2010 Corolla

Link to post
Share on other sites

:wacko: expensive. it is massive and custom though, and i suppose you probably won't see many other people with the same case. 

 

I know,thats why i have one myself.....


SR-2-2x X5650 Xeons-3x 670 FTW-1x 120Gb Force GT-1x 240Gb Force GT-1tb WD Green-12Gb Dom GT 1866-Platimax 1500w-2x HK3-2xD5-24v controller-3x RX 480's-3x NiBlk HK GPU blocks-Koolance tops-BP res-15x SP120's-Little Devil V8.

 

 

Link to post
Share on other sites

Really Nice Build.

Kinda to industrial for me, but looks sick!

 

Is it a windowed case? Have I Completely missed it...T_T lol


AMD A10 6800k Overclocked | R9 290x | 1200w PSU | NZXT H230 Case | 16GB Corsair Tactical Tracer | 2 x 2 TB HDD's | 4x 120GB SSD's | 

Link to post
Share on other sites

Really epic. I came here thinking, little devil. A SFF computer yeh? nope. Awesome though.


The first step to insanity is believing in your sanity.

Link to post
Share on other sites
Posted · Original PosterOP

Thanks guys. Bnegative yes your build with the piping is awesome :) im thinking of getting the chiiler version and using this case for a server :)

I have the side window removed for pics


 
My Irish Machine: CPU: AMD Threadripper 1950x cooled by a Custom Watercooling Loop| CASE: Little Devil V10 | MOBO: Asus Zenith Extreme RAM: 32GB DDR4 G.Skill 3200mhz ram | GPU: Nvidia Gtx 1080 PSU: Corsair AX1200 with custom white sleeved Cables  SSD's: 500gb Samsung 970 Pro & 960GB Intel SSD | Monitors: Dual 32" 1440p monitors | Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset

 

| Pics of my rig |

 

My German Machine: CPU: AMD 3950x cooled by a Custom Watercooling Loop| CASE: Phantek Evolv X | MOBO: X570 Gigabyte Auros Extreme RAM: 32GB DDR4 G.Skill 3600mhz ram | GPU: Nvidia Rtx 2080 PSU: Corsair RM1000x SSD's: 1Tb Adata XPG SX8200 Pro & 2Tb Adata XPG SX8200 Pro | Monitors: 34" Acer Predator| Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset
   

| Pics of my rig |

 

Link to post
Share on other sites
Posted · Original PosterOP

I was dissappointed with the temps I was getting in my loop so I decided to alter the flow of the liquid so it was going down through the blocks to make it easier.

I will put led's on the ram and gpu blocks to match the look of the cpu block and I might get the case resprayed black.

This is how it turned out:

IMG_3691_zps19367356.jpg

 

IMG_3689_zpsd39fa817.jpg

 

 

 

 

 

 

This is my desk setup, a bit messy but you get the idea :)

I use a shirt for a rest as anything thicker is just uncomfortable :P

I also have the screens at a very wide angle as it then makes eyefinity seem more natural and the secondary screens are used as peripheral monitors then. It immerses you in the game more when all you can see is the screens and nothing else :)

IMG_3703_zpsd85b457a.jpg


 
My Irish Machine: CPU: AMD Threadripper 1950x cooled by a Custom Watercooling Loop| CASE: Little Devil V10 | MOBO: Asus Zenith Extreme RAM: 32GB DDR4 G.Skill 3200mhz ram | GPU: Nvidia Gtx 1080 PSU: Corsair AX1200 with custom white sleeved Cables  SSD's: 500gb Samsung 970 Pro & 960GB Intel SSD | Monitors: Dual 32" 1440p monitors | Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset

 

| Pics of my rig |

 

My German Machine: CPU: AMD 3950x cooled by a Custom Watercooling Loop| CASE: Phantek Evolv X | MOBO: X570 Gigabyte Auros Extreme RAM: 32GB DDR4 G.Skill 3600mhz ram | GPU: Nvidia Rtx 2080 PSU: Corsair RM1000x SSD's: 1Tb Adata XPG SX8200 Pro & 2Tb Adata XPG SX8200 Pro | Monitors: 34" Acer Predator| Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset
   

| Pics of my rig |

 

Link to post
Share on other sites
Posted · Original PosterOP

I've picked up a 290x for this and I've ordered a raystorm waterblock and backplate for it as I was getting sick of the amd frame pacing driver issue that has not been rectified yet with the crossfire eyefinity 7970's.


 
My Irish Machine: CPU: AMD Threadripper 1950x cooled by a Custom Watercooling Loop| CASE: Little Devil V10 | MOBO: Asus Zenith Extreme RAM: 32GB DDR4 G.Skill 3200mhz ram | GPU: Nvidia Gtx 1080 PSU: Corsair AX1200 with custom white sleeved Cables  SSD's: 500gb Samsung 970 Pro & 960GB Intel SSD | Monitors: Dual 32" 1440p monitors | Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset

 

| Pics of my rig |

 

My German Machine: CPU: AMD 3950x cooled by a Custom Watercooling Loop| CASE: Phantek Evolv X | MOBO: X570 Gigabyte Auros Extreme RAM: 32GB DDR4 G.Skill 3600mhz ram | GPU: Nvidia Rtx 2080 PSU: Corsair RM1000x SSD's: 1Tb Adata XPG SX8200 Pro & 2Tb Adata XPG SX8200 Pro | Monitors: 34" Acer Predator| Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset
   

| Pics of my rig |

 

Link to post
Share on other sites
Posted · Original PosterOP

I had to rma my 290x in the end :(. I am waiting on it since the 15th of jan (Still waiting to get it back). I got reallly impatient so bought another one in the mean time.

I got my new 290x yesterday so I decided I couldn't wait for my photon res to arrive which I have on order also because of the low quality of the t-virus res and just tried it out :)

20140204_214542_zps095b1fa4.jpg

Will get a decent pic and have proper dye in it when the photon res arrives.
I'm not sure what I will do with the second 290x if I ever get it back from rma. If I put it in this it means will have to watercool it also :)


 
My Irish Machine: CPU: AMD Threadripper 1950x cooled by a Custom Watercooling Loop| CASE: Little Devil V10 | MOBO: Asus Zenith Extreme RAM: 32GB DDR4 G.Skill 3200mhz ram | GPU: Nvidia Gtx 1080 PSU: Corsair AX1200 with custom white sleeved Cables  SSD's: 500gb Samsung 970 Pro & 960GB Intel SSD | Monitors: Dual 32" 1440p monitors | Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset

 

| Pics of my rig |

 

My German Machine: CPU: AMD 3950x cooled by a Custom Watercooling Loop| CASE: Phantek Evolv X | MOBO: X570 Gigabyte Auros Extreme RAM: 32GB DDR4 G.Skill 3600mhz ram | GPU: Nvidia Rtx 2080 PSU: Corsair RM1000x SSD's: 1Tb Adata XPG SX8200 Pro & 2Tb Adata XPG SX8200 Pro | Monitors: 34" Acer Predator| Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset
   

| Pics of my rig |

 

Link to post
Share on other sites

Little? lol that's a great oxymoron ! :D

 

Lovely build. 


Area 51 2014. Intel 5820k@ 4.4ghz. MSI X99.16gb Quad channel ram. AMD Fury X.Asus RAIDR.OCZ ARC 480gb SSD. Velociraptor 600gb. 2tb WD.

Link to post
Share on other sites
Posted · Original PosterOP

Thanks for the compliments :).

Finally got a chance to put the res in the pc, idle temps dropped from the low 30's to low 20's with just switching the res (Not sure how eek.png but i'm happy :) ).
You can ignore the colour of the dye as i'm just testing it out with plain water and the bit of dye that wasnt drained out to see if I was happy with the layout.

 

I'm not sure if I should keep the other 290x when I get it back and watercool it also or just leave it as it is and sort the crystal link stuff first.

IMG_4495_zps18818897.jpg


 
My Irish Machine: CPU: AMD Threadripper 1950x cooled by a Custom Watercooling Loop| CASE: Little Devil V10 | MOBO: Asus Zenith Extreme RAM: 32GB DDR4 G.Skill 3200mhz ram | GPU: Nvidia Gtx 1080 PSU: Corsair AX1200 with custom white sleeved Cables  SSD's: 500gb Samsung 970 Pro & 960GB Intel SSD | Monitors: Dual 32" 1440p monitors | Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset

 

| Pics of my rig |

 

My German Machine: CPU: AMD 3950x cooled by a Custom Watercooling Loop| CASE: Phantek Evolv X | MOBO: X570 Gigabyte Auros Extreme RAM: 32GB DDR4 G.Skill 3600mhz ram | GPU: Nvidia Rtx 2080 PSU: Corsair RM1000x SSD's: 1Tb Adata XPG SX8200 Pro & 2Tb Adata XPG SX8200 Pro | Monitors: 34" Acer Predator| Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset
   

| Pics of my rig |

 

Link to post
Share on other sites

When you're water-cooling everything including ram, that's when you know you've made it! Sweet build


CPU-Intel Core i7-6700k  Motherboard-Asus Z170I Pro Gaming Mini ITX LGA1151  

GPU-MSI GeForce GTX 1060 6GB  Ram-16GB HyperX Fury Black DDR4-2133  Case-Corsair 250D Black  

Displays-Samsung SyncMaster 2443BWX (1920x1200) & Samsung 4k TV 

PSU-Corsair RMx 850W 80+ Gold   Cooling-Corsair H60 54.0 CFM Liquid Cooler   

Keyboard-Corsair K70 RGB w/ MX Brown   Mouse-Razer Naga 2012     Sound-Sennheiser HD 650

 

Link to post
Share on other sites
Posted · Original PosterOP

sweet build

 

nice work on the plumbing  :D

Thanks, it will look alot better when I can replace the compression fittings with crystal link fittings and hard tubing though.


 
My Irish Machine: CPU: AMD Threadripper 1950x cooled by a Custom Watercooling Loop| CASE: Little Devil V10 | MOBO: Asus Zenith Extreme RAM: 32GB DDR4 G.Skill 3200mhz ram | GPU: Nvidia Gtx 1080 PSU: Corsair AX1200 with custom white sleeved Cables  SSD's: 500gb Samsung 970 Pro & 960GB Intel SSD | Monitors: Dual 32" 1440p monitors | Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset

 

| Pics of my rig |

 

My German Machine: CPU: AMD 3950x cooled by a Custom Watercooling Loop| CASE: Phantek Evolv X | MOBO: X570 Gigabyte Auros Extreme RAM: 32GB DDR4 G.Skill 3600mhz ram | GPU: Nvidia Rtx 2080 PSU: Corsair RM1000x SSD's: 1Tb Adata XPG SX8200 Pro & 2Tb Adata XPG SX8200 Pro | Monitors: 34" Acer Predator| Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset
   

| Pics of my rig |

 

Link to post
Share on other sites
Posted · Original PosterOP

I just got news my rma'd 290x is being replaced and will be posted back to me from overclockers.co.uk asap so will get to cf the cards soon biggrin.png.
Cursious to see how frame pacing is on eyefinity without the crossfire cables smile.gif


 
My Irish Machine: CPU: AMD Threadripper 1950x cooled by a Custom Watercooling Loop| CASE: Little Devil V10 | MOBO: Asus Zenith Extreme RAM: 32GB DDR4 G.Skill 3200mhz ram | GPU: Nvidia Gtx 1080 PSU: Corsair AX1200 with custom white sleeved Cables  SSD's: 500gb Samsung 970 Pro & 960GB Intel SSD | Monitors: Dual 32" 1440p monitors | Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset

 

| Pics of my rig |

 

My German Machine: CPU: AMD 3950x cooled by a Custom Watercooling Loop| CASE: Phantek Evolv X | MOBO: X570 Gigabyte Auros Extreme RAM: 32GB DDR4 G.Skill 3600mhz ram | GPU: Nvidia Rtx 2080 PSU: Corsair RM1000x SSD's: 1Tb Adata XPG SX8200 Pro & 2Tb Adata XPG SX8200 Pro | Monitors: 34" Acer Predator| Mouse: Logitech G903 and Powerplay matt | KEYBOARD: Logitech G610 | HEADSET: Logitech G935 Wireless Headset
   

| Pics of my rig |

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×