Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
stealth80

Project Iced Blood - Mayhems/Primochill Sponsored. COMPLETE 15/02/16

Recommended Posts

Posted · Original PosterOP

                                                                                      142411535289307176.gif

 

 

Sponsored by:
 
DjYOLyg.png
 
 
AEOXymj.png?1
 
 
 
So, turns out I really enjoyed modding my Antec 902, but annoyingly the way my living room is set out and the fact the window is on the right hand side of the case, no one can actually see the work I did without leaning over the side of the Sofa/Desk to able to view inside it 
 
 Step up the Thermaltake Core X9 
 
x9ZsFuT.jpg
 
Now Purchased :clap:
 
 
 For this I will be gutting the main components out of my sig rig:
 
 Intel i7 4790K
 Asus Maximus VII Ranger
 EVGA 970GTX SC ACX 2.0
 SoundBlaster Z
 Gskill Ripjaw X 4 x 4GB
 Samsung XP941 256GB PCIE SSD
 Corsair 620w
 Asus ROG Front Panel
 
 EK-DDC 3.2 PWM X-RES 140
 Alphacool UT60 240mm radiator
 
 
 
 For the moment everything is purely in planning phase, at this time I am considering the following:
 
 Watercooling to be Pastel Red for CPU Loop and Pastel White for the GPU Loop
 
 The following components form my "planned" watercooling shopping list:
 
 Chipset waterblock for Motherboard - EK-MOSFET ASUS M7G - Acetal+Nickel
 
 CPU Waterblock - EK-Supremacy EVO - Nickel (CSQ)
 
 GPU Block - Bitspower VG-NGTX970ESACX Acrylic
 
 360mm Radiator - Alphacool 35273 NexXxoS XT60 Radiator 360 White Edition x2
 
 Reservoir + Combo - EK-DDC 3.2 PWM X-RES 140, Water Cooling Pump (This matches the one I currently have)
 
 Monsoon White Fittings - ModMyToys 19/13mm (ID 1/2 - 3/4) Compression Fitting - Six Pack - White + Red Carbon (For the white loop)
 
 
 
 Fans, open to advice here, I want 3x white LED for the white loop and 2x red for the red loop
 
 
 White - Enermax T.B.Vegas 120mm Single Fan White LEDs - Purchased
 
 
 Extras:
 
 White caps - Monsoon x5
 
 
 Tubing - Primochill Advanced - Purchased
 
 Coolant - Mayhems Pastal Red
 
 Coolant - Mayhems Ice White
 
 Fan Controller - BitFenix Recon - White
 
Additional Comment:
 
 been planning this a little more after i came up with an idea whilst playing Wildstar. Im thinking of a small section using some 3g fake grass with a small anime figurine inside the case using the 2x reservoirs as a back drop
 
 
 and something along the lines of 
 

 

 
I've finally made my mind up on a few things, and whilst I don't have the Thermaltake case yet (delays from supplier) I have actually managed to get started.
 
I've decided to keep the RoG Front Base for the Asus Ranger Motherboard. Now as the case is going to be sprayed white, I figured I should make the front base as white as possible:
 
2lDurHS.jpg
 
First thing I need to do was get the knob off (no puns!) what a pain in the rear this was, but eventually it came off allowing me to fully strip down the electrics from the case/cover:
 
ckYKLAV.jpg
 
Once that was stripped I went out and picked the brightest white I could find which is useable on both plastics and metal. Once the screen was masked up I got to work with the primer:
 
17ydorz.jpg
 
Ugold9a.jpg
 
0gnk84y.jpg
 
 
I've finished applying the top coat now, i'm going to let it dry over night, check for runs and hopefully remove the tape tomorrow evening, by which time I should know if the case is in stock at Scan :)
 
Got the RoG Front Base fully painted and re-assembled:
 
Bmf59EW.jpg
 
Ugold9a.jpg
 
NZJanYs.jpg
 
UPDATE
 
So today the Thermaltake case arrived and oh boy, its big!
 
o2pBukg.jpg
 
9hY3MuN.jpg
 
7L2fHH9.jpg
 
I took a picture of it here on my desk in between an Antec 902 and a Zalman case, both are mid towers, but it does show the scale of the Core X9.
 
dzMb2eV.jpg
 
Heres a few pictures of the case before I stripped it down for painting:
 
BlJ07lU.jpg
 
oHzmlIq.jpg
 
 
Top view with cover removed and rad/fan mounts still fitted:
 
dJykIlV.jpg
 
Motherboard tray:
 
XeowvDw.jpg
 
PSU Area (one of two!)
 
5tXJnLM.jpg
 
Front lower and drive cages, I won't be using these in my mod unless I need 6TB in the future : )
 
mHBVhG5.jpg
 
And here is the stripped frame, when they said this was modular they weren't joking!
 
obhqAcm.jpg
 
FmukYA5.jpg
 
I have started painting the internal parts of the case and the front mesh, I really under estimated how much paint I would need to do this, however heres some progress:
 
Front fully painted :D
 
ybGafQX.jpg
 
PSU Blank/Grill
 
hHRE5OA.jpg
 
selection of other parts:
 
3axd7hj.jpg
 
well it's been a late one, just the 3 external panels remain to be sprayed :rock:
 
Transferred the 200mm Red Fan from my Antec 902 mod to use in the front of this one.
 
WSLM1F1.jpg
 
Here's some pics of things so far:
 
TiZChzu.jpg
 
Do1ZNoJ.jpg
 
220EYPe.jpg
 
43VfBnR.jpg
 
jkPZ58h.jpg
 
g1NXBpe.jpg
 
4rQVDYa.jpg

 

UPDATE 15th Feb 2015

 
So I finally got around to finishing the painting today, I had the roof and side panel to paint and a few imperfections to address. So now I can say that the case is fully painted, now need to work out where I want to placed the 2x 360mm radiators and whether or not to go push or pull with the fans:
 
ekCtLCM.jpg
 
9TZT0Ww.jpg
 
xjuBS0a.jpg

 

Ryzen Ram Guide

 

My Project Logs   Iced Blood    Temporal Snow    Temporal Snow Ryzen Refresh

 

CPU - Ryzen 1700 @ 4Ghz  Motherboard - Gigabyte AX370 Aorus Gaming 5   Ram - 16Gb GSkill Trident Z RGB 3200  GPU - Palit 1080GTX Gamerock Premium  Storage - Samsung XP941 256GB, Crucial MX300 525GB, Seagate Barracuda 1TB   PSU - Fractal Design Newton R3 1000W  Case - INWIN 303 White Display - Asus PG278Q Gsync 144hz 1440P

Link to post
Share on other sites

Updates please!!!!


"Everyone dies alone. But if you meant something to someone, if you helped someone, or loved someone, if even a single person remembers you, then maybe you never really die. And maybe, this isn't the end at all."

Link to post
Share on other sites
Posted · Original PosterOP

haha sorry, more updates when I do more work, the log ive uploaded is as far as I have got which was today, I finished the final exterior panels. I think used around 15 tins of spray paint to get this fully painted.

 

I guess theres a slight update, ive just ordered the 2nd pump/res combo, the 2x 360mm white radiators and the EK Supremecy EVO Nikel edition

 

I'm also planning on a second partition wall in the base of the case where I can mount the 2x res/pump combos on top of and also use it to hide some cabling. I'm gonna cut the words ICED BLOOD in a decent font out of it spray it white (duh!) and illuminate the rear in red:

 

Excuse the Toddler crayon sketch:

 

DFwMbpD.jpg


 

Ryzen Ram Guide

 

My Project Logs   Iced Blood    Temporal Snow    Temporal Snow Ryzen Refresh

 

CPU - Ryzen 1700 @ 4Ghz  Motherboard - Gigabyte AX370 Aorus Gaming 5   Ram - 16Gb GSkill Trident Z RGB 3200  GPU - Palit 1080GTX Gamerock Premium  Storage - Samsung XP941 256GB, Crucial MX300 525GB, Seagate Barracuda 1TB   PSU - Fractal Design Newton R3 1000W  Case - INWIN 303 White Display - Asus PG278Q Gsync 144hz 1440P

Link to post
Share on other sites
Link to post
Share on other sites
Posted · Original PosterOP

Also opted for 6x Enermax Vegas LED white fans, rather than 3 red and 3 white :

 

http://www.enermax.co.uk/tb-vegas/

 

https://www.youtube.com/watch?v=tOn-U_D4WVY


 

Ryzen Ram Guide

 

My Project Logs   Iced Blood    Temporal Snow    Temporal Snow Ryzen Refresh

 

CPU - Ryzen 1700 @ 4Ghz  Motherboard - Gigabyte AX370 Aorus Gaming 5   Ram - 16Gb GSkill Trident Z RGB 3200  GPU - Palit 1080GTX Gamerock Premium  Storage - Samsung XP941 256GB, Crucial MX300 525GB, Seagate Barracuda 1TB   PSU - Fractal Design Newton R3 1000W  Case - INWIN 303 White Display - Asus PG278Q Gsync 144hz 1440P

Link to post
Share on other sites
Posted · Original PosterOP

DjYOLyg.png

 

 

Thanks to Mick over at Mayhems who has kindly agreed to donate the Coolants

 

http://mayhems.co.uk/store/ice-white-1ltr.html

 

http://mayhems.co.uk/store/red-1ltr.html

 

and as an unexpected bonus: Mayhems Blitz Pro Cleaning System

http://mayhems.co.uk/store/mayhems-blitz-pro.html?sl=en


 

Ryzen Ram Guide

 

My Project Logs   Iced Blood    Temporal Snow    Temporal Snow Ryzen Refresh

 

CPU - Ryzen 1700 @ 4Ghz  Motherboard - Gigabyte AX370 Aorus Gaming 5   Ram - 16Gb GSkill Trident Z RGB 3200  GPU - Palit 1080GTX Gamerock Premium  Storage - Samsung XP941 256GB, Crucial MX300 525GB, Seagate Barracuda 1TB   PSU - Fractal Design Newton R3 1000W  Case - INWIN 303 White Display - Asus PG278Q Gsync 144hz 1440P

Link to post
Share on other sites
Posted · Original PosterOP

Today I had some treasures arrive :D

 

q22Tqmn.jpg

 
qG9BpLd.jpg
 
suLXqmm.jpg
 
G4r27F3.jpg

 


 

Ryzen Ram Guide

 

My Project Logs   Iced Blood    Temporal Snow    Temporal Snow Ryzen Refresh

 

CPU - Ryzen 1700 @ 4Ghz  Motherboard - Gigabyte AX370 Aorus Gaming 5   Ram - 16Gb GSkill Trident Z RGB 3200  GPU - Palit 1080GTX Gamerock Premium  Storage - Samsung XP941 256GB, Crucial MX300 525GB, Seagate Barracuda 1TB   PSU - Fractal Design Newton R3 1000W  Case - INWIN 303 White Display - Asus PG278Q Gsync 144hz 1440P

Link to post
Share on other sites
Posted · Original PosterOP

Today I got a couple of in house engineers to help with the partition. Hopefully have it end of this week/beginning of next week with the lettering machined out :D
 I unboxed a few things and tried a preliminary fitting of the rads and fans and I think I'm quite happy, just gotta make sure it tallies up with the partition wall.

 

I love these fans
 
eL4XqJ1.jpg
 
5y7o2pw.jpg
 
8a6nMXo.jpg
 
8a6nMXo.jpg
 

 

FKxuXgY.jpg

 


 

Ryzen Ram Guide

 

My Project Logs   Iced Blood    Temporal Snow    Temporal Snow Ryzen Refresh

 

CPU - Ryzen 1700 @ 4Ghz  Motherboard - Gigabyte AX370 Aorus Gaming 5   Ram - 16Gb GSkill Trident Z RGB 3200  GPU - Palit 1080GTX Gamerock Premium  Storage - Samsung XP941 256GB, Crucial MX300 525GB, Seagate Barracuda 1TB   PSU - Fractal Design Newton R3 1000W  Case - INWIN 303 White Display - Asus PG278Q Gsync 144hz 1440P

Link to post
Share on other sites
Posted · Original PosterOP

Haha ye I totally went for looks, but to be honest the static pressure (quoted albeit) aint too bad. Its gonna be a massive step up from my 240mm rad cramped into an Antec 902 running both my cpu and gpu loop =p

 

Hopefully have the partition end of week to spray and acrylic piece on its way. Once that's here I guess I can start planning the loop and locate the res's


 

Ryzen Ram Guide

 

My Project Logs   Iced Blood    Temporal Snow    Temporal Snow Ryzen Refresh

 

CPU - Ryzen 1700 @ 4Ghz  Motherboard - Gigabyte AX370 Aorus Gaming 5   Ram - 16Gb GSkill Trident Z RGB 3200  GPU - Palit 1080GTX Gamerock Premium  Storage - Samsung XP941 256GB, Crucial MX300 525GB, Seagate Barracuda 1TB   PSU - Fractal Design Newton R3 1000W  Case - INWIN 303 White Display - Asus PG278Q Gsync 144hz 1440P

Link to post
Share on other sites

Nice case for watercooling. :P


System 1: Thermaltake Element Q - Thermaltake 220W SFX - Asus AT5IONT-I mini-ITX - Intel® Atom™ D525 onboard 1.8GHz Dual-Core HT - Integrated NVIDIA® ION™ - 2x 2GB Kingston DDR3 - Samsung 120GB 840 Series - Scythe Kama Rack 3.5 - Asus DVD-RW

System 2: Thermaltake Element Q - Thermaltake 220W SFX - Asus E2KM1I-DELUXE mini-ITX - AMD E2-2000 onboard 1.75GHz Dual-Core - Integrated AMD® Radeon HD 7340 - 2x 4GB Kingston DDR3 - Samsung 120GB 840 Series - Scythe Kama Rack 3.5 - Asus DVD-RW

Building: Bitfenix Prodigy Black - Corsair AX860i - Asus Maximus VII Impact - Corsair Hydro Series H100i - Intel® Core™ i7 4790K - Asus Matrix Platinum GTX 980 4GB - Corsair 16GB Dominator Platinum 2x 8GB DDR3 2400MHz CL10 - Samsung 1TB EVO 840 Series

Link to post
Share on other sites
Posted · Original PosterOP

Ye theres certainly a lot of space in there! got to buy the fittings and EK Supremecy, but that's gonna have to wait until next month as Mrs Stealth aint too happy about the treasures that arrived yesterday :rolleyes:


 

Ryzen Ram Guide

 

My Project Logs   Iced Blood    Temporal Snow    Temporal Snow Ryzen Refresh

 

CPU - Ryzen 1700 @ 4Ghz  Motherboard - Gigabyte AX370 Aorus Gaming 5   Ram - 16Gb GSkill Trident Z RGB 3200  GPU - Palit 1080GTX Gamerock Premium  Storage - Samsung XP941 256GB, Crucial MX300 525GB, Seagate Barracuda 1TB   PSU - Fractal Design Newton R3 1000W  Case - INWIN 303 White Display - Asus PG278Q Gsync 144hz 1440P

Link to post
Share on other sites
Posted · Original PosterOP

Bit of a play on paint to give an idea of the planned loops:

 

USFWlPV.jpg

 

Seems I cant use that end port, so I will have to rotate the upper rad and run an extra long tube. Also I didn't add that the red line will be hitting a motherboard VRM block before going to the radiator


 

Ryzen Ram Guide

 

My Project Logs   Iced Blood    Temporal Snow    Temporal Snow Ryzen Refresh

 

CPU - Ryzen 1700 @ 4Ghz  Motherboard - Gigabyte AX370 Aorus Gaming 5   Ram - 16Gb GSkill Trident Z RGB 3200  GPU - Palit 1080GTX Gamerock Premium  Storage - Samsung XP941 256GB, Crucial MX300 525GB, Seagate Barracuda 1TB   PSU - Fractal Design Newton R3 1000W  Case - INWIN 303 White Display - Asus PG278Q Gsync 144hz 1440P

Link to post
Share on other sites
Posted · Original PosterOP

Hey thanks, the paint, Simoniz white acrylic primer followed by Simoniz Acrylic Gloss White. Took about 15 tins in total


 

Ryzen Ram Guide

 

My Project Logs   Iced Blood    Temporal Snow    Temporal Snow Ryzen Refresh

 

CPU - Ryzen 1700 @ 4Ghz  Motherboard - Gigabyte AX370 Aorus Gaming 5   Ram - 16Gb GSkill Trident Z RGB 3200  GPU - Palit 1080GTX Gamerock Premium  Storage - Samsung XP941 256GB, Crucial MX300 525GB, Seagate Barracuda 1TB   PSU - Fractal Design Newton R3 1000W  Case - INWIN 303 White Display - Asus PG278Q Gsync 144hz 1440P

Link to post
Share on other sites
Posted · Original PosterOP

Got the partition wall back today and I think the guys did a great job! I need to take it in again tomorrow for tweak to make it fit perfect before spraying it white, but it looks pretty good. Once the acrylic arrives I can stick the centres of the B, D and O's.

 

tVUvsxx.jpg
 
Heres the trunking im going to use to hide the cables going to the Asus Rog and Fan controller
 
VuS1JV1.jpg
 
nGfpoHV.jpg
 

 

I may have to reconsider the rad positioning for the CPU loop as the D will be covered if it goes where it's planned at the moment

 

Ryzen Ram Guide

 

My Project Logs   Iced Blood    Temporal Snow    Temporal Snow Ryzen Refresh

 

CPU - Ryzen 1700 @ 4Ghz  Motherboard - Gigabyte AX370 Aorus Gaming 5   Ram - 16Gb GSkill Trident Z RGB 3200  GPU - Palit 1080GTX Gamerock Premium  Storage - Samsung XP941 256GB, Crucial MX300 525GB, Seagate Barracuda 1TB   PSU - Fractal Design Newton R3 1000W  Case - INWIN 303 White Display - Asus PG278Q Gsync 144hz 1440P

Link to post
Share on other sites
Posted · Original PosterOP

So today I got the partition back so I've made some fixing points, cut holes for wires beneath the motherboard tray and holes for the drain lines for 2 res's, currently just painting up ready to fit. The acrylic also arrived today so I prepped that and frosted the back ready for the Red LEDs that arrive next week. Incidentally I tried 4x blue LEDs in it and I thought they looked really nice on the frosted back, shame its against the project colour scheme :P


 

Ryzen Ram Guide

 

My Project Logs   Iced Blood    Temporal Snow    Temporal Snow Ryzen Refresh

 

CPU - Ryzen 1700 @ 4Ghz  Motherboard - Gigabyte AX370 Aorus Gaming 5   Ram - 16Gb GSkill Trident Z RGB 3200  GPU - Palit 1080GTX Gamerock Premium  Storage - Samsung XP941 256GB, Crucial MX300 525GB, Seagate Barracuda 1TB   PSU - Fractal Design Newton R3 1000W  Case - INWIN 303 White Display - Asus PG278Q Gsync 144hz 1440P

Link to post
Share on other sites
Posted · Original PosterOP

I did some more thinking and decided that the second 360mm radiator needs to go in the roof of the case to ensure that the text in the partition wall is visible. This left a rather large vacant area in the lower case infant of the window. So last night i stripped my sig rig and flushed the 240mm radiator, today I've been spraying the 240mm rad and the partition wall. Ill get some shots up later once its all finished.


 

Ryzen Ram Guide

 

My Project Logs   Iced Blood    Temporal Snow    Temporal Snow Ryzen Refresh

 

CPU - Ryzen 1700 @ 4Ghz  Motherboard - Gigabyte AX370 Aorus Gaming 5   Ram - 16Gb GSkill Trident Z RGB 3200  GPU - Palit 1080GTX Gamerock Premium  Storage - Samsung XP941 256GB, Crucial MX300 525GB, Seagate Barracuda 1TB   PSU - Fractal Design Newton R3 1000W  Case - INWIN 303 White Display - Asus PG278Q Gsync 144hz 1440P

Link to post
Share on other sites
Posted · Original PosterOP
So today I got quite a bit of work done and I think it's finally starting to look like a modded pc rather than a small building site, as a plus note i think i've finished spray painting so that should please the wife!
 
So the partition is painted and fitted, but I'm waiting on the 5mm LED's to arrive before I fit the acrylic and the inside of the B,D and O's from the text. I also painted and added my 240mm radiator to lower of the case to fill the void that was left from moving the rad to the ceiling:
 
otDLicg.jpg
 
BKYCyZI.jpg
 
As I said I've also moved the other 360mm rad to the ceiling, if it was left in the lower section it would obscure half of the text on the partition wall. Now both 360mm rads are in the roof!
 
pJ7QfWi.jpg
 
As i got the partition wall in I figured I may aswell go ahead and sort out the locations of the two EK Pump/Res combos. I de-pinned the PWM and Molex connectors and made small holes on top of the partition allowing the wires to be hidden. That involved dropping the bottom from one of the res's to switch the wires to the reverse side. Now its all done, and i really like the look so far. The fittings on the left side Res will be swapped to the white ones i detailed in my initial parts list once i win the lottery to pay for everything :roll eyes:
 
v9hM9h7.jpg
 
qhoCXw2.jpg
 

 

Osvotkr.jpg
 

 

Ryzen Ram Guide

 

My Project Logs   Iced Blood    Temporal Snow    Temporal Snow Ryzen Refresh

 

CPU - Ryzen 1700 @ 4Ghz  Motherboard - Gigabyte AX370 Aorus Gaming 5   Ram - 16Gb GSkill Trident Z RGB 3200  GPU - Palit 1080GTX Gamerock Premium  Storage - Samsung XP941 256GB, Crucial MX300 525GB, Seagate Barracuda 1TB   PSU - Fractal Design Newton R3 1000W  Case - INWIN 303 White Display - Asus PG278Q Gsync 144hz 1440P

Link to post
Share on other sites
Posted · Original PosterOP

I decided that i could route one of the tubes through the partition wall, down from the right side res and out of the wall next to the "D" on BLOOD and into a 90 degree fitting on the 240mm radiator, this of course required me to repaint the partition, wife no happy !


 

Ryzen Ram Guide

 

My Project Logs   Iced Blood    Temporal Snow    Temporal Snow Ryzen Refresh

 

CPU - Ryzen 1700 @ 4Ghz  Motherboard - Gigabyte AX370 Aorus Gaming 5   Ram - 16Gb GSkill Trident Z RGB 3200  GPU - Palit 1080GTX Gamerock Premium  Storage - Samsung XP941 256GB, Crucial MX300 525GB, Seagate Barracuda 1TB   PSU - Fractal Design Newton R3 1000W  Case - INWIN 303 White Display - Asus PG278Q Gsync 144hz 1440P

Link to post
Share on other sites
Posted · Original PosterOP

Bit more work done tonight, got the letters stuck to the acrylic for the back drop, but can't attach the back drop to the partition wall until the LEDs arrive which appear to have been delayed :wall bash:

 
So all i got for the moment is an example of the routing from the res to the 240mm radiator, need to order more 90 degrees, compression and a couple of 45 degree fittings and the 16/10 primochill.
 
Lb33VOw.jpg
 
vXew0Wa.jpg
 

 

Ryzen Ram Guide

 

My Project Logs   Iced Blood    Temporal Snow    Temporal Snow Ryzen Refresh

 

CPU - Ryzen 1700 @ 4Ghz  Motherboard - Gigabyte AX370 Aorus Gaming 5   Ram - 16Gb GSkill Trident Z RGB 3200  GPU - Palit 1080GTX Gamerock Premium  Storage - Samsung XP941 256GB, Crucial MX300 525GB, Seagate Barracuda 1TB   PSU - Fractal Design Newton R3 1000W  Case - INWIN 303 White Display - Asus PG278Q Gsync 144hz 1440P

Link to post
Share on other sites
Posted · Original PosterOP

I decided to drop the motherboard and PSU in the case tonight as a temporary fit just to see what extra cables I'm gonna need and basically to see how the fans look, and I love them lol :D

 
I decided to drop the motherboard and PSU in the case tonight as a temporary fit just to see what extra cables I'm gonna need and basically to see how the fans look, and I love them lol :D
 
SNdX9Op.jpg
 
7MicMVn.jpg
 
For a start i need a braided 8 pin tax extender, cable is just long enough!
 
NzVUhDd.jpg
 
Wsc6OPv.jpg
 
35WTc4z.jpg
 

 

Ryzen Ram Guide

 

My Project Logs   Iced Blood    Temporal Snow    Temporal Snow Ryzen Refresh

 

CPU - Ryzen 1700 @ 4Ghz  Motherboard - Gigabyte AX370 Aorus Gaming 5   Ram - 16Gb GSkill Trident Z RGB 3200  GPU - Palit 1080GTX Gamerock Premium  Storage - Samsung XP941 256GB, Crucial MX300 525GB, Seagate Barracuda 1TB   PSU - Fractal Design Newton R3 1000W  Case - INWIN 303 White Display - Asus PG278Q Gsync 144hz 1440P

Link to post
Share on other sites

Lookign good, really love those Enermax fans =D

 

And both 360mmRADs ibn the roof look sick, really beast.


i7 4790K@4.5GHz-1.15V, BeQuiet! SR2, Asrock z97e-itx/ac, Kingston  Fury 16GB@1866MHz, GTX 670 2GB, 3x ssdNOW300V 300ishGB, Bitfenix Prodigy, OCZ ZT 750W Twittwit@enRodjavel

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×