Jump to content

does this still matters to you ?

BudgetBoy
By BudgetBoy
in Power Supplies
 Share
Posted

Within budget: Yes

Over budget: No.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Nah. My next build is gonna be an miniITX system in incase M1. 

Couldn't careless about the transparent side panel. 

If it is not broken, let's fix till it is. 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I started off small with a Cooler Master N200 case before I realized what I wanted was a bigger case with nicer looking components. So I just switched to the CM Master case Pro 5 and that was it. GRT a case to hold everything until you can get the actual case you want. Sure you'll have another whole pc lying around but at least it'll be a good backup.

"The only thing that matters right now is that you're here, and you're safe."

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

if you own a drill, and something to cut metal.

buy 4 bolts, 4 nuts and 8 rubber washers.

buy either glass(cutting that youre on your own) or a hseet of acrilic

 

cut out square, bolt acrilic to case 

??????

profit

 

or ya know just take the side of the case off and leave it off xD

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I've got an nCase M1 and I love it. Sad I can't see my custom sleeved cables in it, but feel satisfied I have them in there. 

 

You could end up with something like this, I built it some years ago.

 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Power Supplies

×