overclocking 7600K to 5.0Ghz

[jig saw]

Hello All 

 

so I have just built my new Kabylake system 

Specs:

asus Z270E strix 

asus gtx1070 strix 

core i5 7600K

cooler master hyper 212X ( push/pull )

G.Skill 2x8GB ddr4 3200

samsung 750 evo SSD

WD black HDD

Thermaltake smart 550Watt PSU

 

I have updated my bios to the latest version and did a clean Win 10 pro install and

did some CPU overclocking, until my graphics card arrive and I managed to get 5.0Ghz but didn't test it for a long stability test but anyway I want to ask is 1.355v for this CPU is high ??

I searched the internet for days and I didn't find the max Vcore for the new Kabylake CPU's 

 

my current OC profile :

ram : XMP 3200

core ration : 50x100

vcore : 1.355v

temp : max 84 / avg 78

 

I am a bit new to overclocking the CPU 

I had previously core i7 4790K but I didn't overclock it 

( noob here )

[Unexas.]

1 minute ago, jig saw said:

Hello All 

 

so I have just built my new Kabylake system 

Specs:

asus Z270E strix 

asus gtx1070 strix 

core i5 7600K

cooler master hyper 212X ( push/pull )

G.Skill 2x8GB ddr4 3200

samsung 750 evo SSD

WD black HDD

Thermaltake smart 550Watt PSU

 

I have updated my bios to the latest version and did a clean Win 10 pro install and

did some CPU overclocking, until my graphics card arrive and I managed to get 5.0Ghz but didn't test it for a long stability test but anyway I want to ask is 1.355v for this CPU is high ??

I searched the internet for days and I didn't find the max Vcore for the new Kabylake CPU's 

 

my current OC profile :

ram : XMP 3200

core ration : 50x100

vcore : 1.355v

temp : max 84 / avg 78

 

I am a bit new to overclocking the CPU 

I had previously core i7 4790K but I didn't overclock it 

( noob here )

Your voltage is fine but make sure to stress test it.

[Enderman]

1.35v is fine.

Most people can go up to 1.45 safely as long as temps are ok.

[jig saw]

35 minutes ago, Unexas. said:

Your voltage is fine but make sure to stress test it.

thats good to hear ...

do you know what is the max voltage for Kabylake ??

 

also i run realbench and cinbench with no problem with that overclock 

but when i run the stress test in realbench after 25min it stops and says system unstable 

i chose 16gb and 1 hour stress test 

 

 

 

[jig saw]

33 minutes ago, Enderman said:

1.35v is fine.

Most people can go up to 1.45 safely as long as temps are ok.

 

yeah i saw some crazy voltages on the internet but i dont want to risk my CPU

my temps are well under 80C with some spikes for less than a sec the maximum it reached was 84C

the problem iam having now is i cant run adaptive mode for the voltage because when i boot to windows and check the voltage in CPU-Z it shows 1.45v so iam stuck with manual mode 

[jig saw]

4 hours ago, Unexas. said:

Your voltage is fine but make sure to stress test it.

BTW what app do you recommend for stress test ??

[Unexas.]

21 hours ago, jig saw said:

BTW what app do you recommend for stress test ??

Intel burn test AIDA 64 etc.

[jig saw]

3 hours ago, Unexas. said:

Intel burn test AIDA 64 etc.

 I did a stress stability test today with AIDA64 for 1 hour with no problem 

I also ran real bench stress test for 1 hour with 4gb ram and full fan speed 

 those are the results i got 

 

[jig saw]

the problem i have now that i changed the voltage from manual to adaptive and set the total cpu voltage for 1.360v

but when i boot to windows and open cpu-z and hardware monitor i see the voltage goes up to 1.404v and down to 1.392v when the cpu hits the 5.0Ghz 

so is that a faulty reporting or is it from the bios or what ?? I am lost ...

i have the latest bios update right now

[Froody129]

Why did you downgrade from a 4790k to a 7600k?

[jig saw]

49 minutes ago, Froody129 said:

Why did you downgrade from a 4790k to a 7600k?

actually i had to do that 

 

i moved to another country and i had to sell my old pc and build a new one in here