5/8" 3/8" tubing question

[Butterfish]

Anyone got an example picture of this watercooling tubing? I would like to see the primochill clear 16/10mm tubing with colored coolant running in a system.

[Butterfish]

no one?

[Guest]

no one?

Visually, clear tube is clear tube. The only differences you notice between tubes is how easily it bends etc.

[inastris]

Primochill advanced lrt is really good tubing. Doesn't cave in, while bending very tightly, and doesn't plastisize, at least in my experience with it. Also, it look pretty damn good in bloodshed red

 

Just be warned, its a bit tighter then 3/8 id so it takes a lot of struggle to fit em on the barbs. But this is good since it will never leak cause its so tight. (That's what she said)

 

Also don't get colours fluid unless you want to clean out your loop every 3 months. Coloured tubing gives the same effect, but is far easier to maintain.

[2Supra4U]

here you go....but is from a h220...still the tubing is nice, doesn't kink. but I think its not a standard tubing type, supposed to be swiftechs "special" tubing

 

[Butterfish]

here you go....but is from a h220...still the tubing is nice, doesn't kink. but I think its not a standard tubing type, supposed to be swiftechs "special" tubing

Thx, better than nothing ^^

[notenoughtv]

Thx, better than nothing ^^

Check out the Overkill Build Guide from Linus. He always uses 3/8 5/8 tubing

 

[kcchi]

@Butterfish I posted a photo with my parts, theres a piece of primochill's advanced LRT 3/8"/1/2" on the left if that helps..

 

http://linustechtips.com/main/topic/69035-100th-post-upcoming-build-sneak-peak/?p=946490

 

EDIT: actually here's the link to a bigger picture of it http://i.imgur.com/YyPXUds.jpg

[Woodypc]

I use 1/2 inch tubing with 1/2 inch compression fitting and the tubing bends easily with no kinks.

[N7_Zer0]

Only pics I have on hand are are Primochill LRT 3/8 5/8 White's, no clear, sorry.

 

 

 

 

Edit: I lied, found a pic of my first watercooled build (Primochill 3/8 5/8 LRT Clear with Swiftech HydrX)

 

[Butterfish]

Only pics I have on hand are are Primochill LRT 3/8 5/8 White's, no clear, sorry.

 

 

Edit: I lied, found a pic of my first watercooled build (Primochill 3/8 5/8 LRT Clear with Swiftech HydrX)

 

 

Very nice indeed! Thank you