Jump to content

Do you recognize this connector?

It's from a Toshiba Tecra  730CDT from 1996. Yes, classic Pentium 150 vintage. This is the connector from the hard drive caddy (which is missing). I need to either get a new caddy for this thing (almost impossible) or know which type of connector it is. It looks very much like SCSI, doesn't it? But I don't think it's gonna be this easy. It's most likely some proprietary connector. If you know a laptop where this connector was also used, please tell me. 

capture_2016-08-13_15-43-59.jpg

i7 6700k - 32GB DDR4-2133 - GTX 980

Link to comment
Share on other sites

Link to post
Share on other sites

Looks like a SCSI Connector to me.

https://en.wikipedia.org/wiki/SCSI

Intel I9-9900k (5Ghz) Asus ROG Maximus XI Formula | Corsair Vengeance 16GB DDR4-4133mhz | ASUS ROG Strix 2080Ti | EVGA Supernova G2 1050w 80+Gold | Samsung 950 Pro M.2 (512GB) + (1TB) | Full EK custom water loop |IN-WIN S-Frame (No. 263/500)

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Altecice said:

Looks like a SCSI Connector to me.

 

1 minute ago, manikyath said:

 

looks like scsi.

 

I know. But it has 60 pins. 

i7 6700k - 32GB DDR4-2133 - GTX 980

Link to comment
Share on other sites

Link to post
Share on other sites

That's SCSI (pronounced SKUZ-ee)

FX-8350 | GA-990FXA-UD3 | G.SKILL 2x8GB 1600MHz | 1TB WD RE4 | CM Hyper 212 EVO | MSI R9 290x Lightning | Corsair AX860i | Silverstone FT05B-W

Pentium G3258 | MSI Z97 PC Mate | G.SKILL 4x4GB 1066MHz | 500GB Samsung 2.5" | Stock cooler | Pending GPU | EVGA 500B | Antec DF-35

GoPro Hero 3 Silver | Netgear R7000 Nighthawk with DD-WRT | HP Officejet Pro 8610 | Canon iP110 | AudioTechnica ATR2500 USB

Downdraft cooler for mITX board (new build) | Desk mount mic stand | Pop filter | Anti-vibration mount for microphone | mITX case | 3rd monitor (matching existing 23.1" | Intel Core i7-4790K (for mITX build)

Link to comment
Share on other sites

Link to post
Share on other sites

good ol PCMCIA card slot... sad to say the Army still actually uses that interface. Atleast they did when I got out in 2010. 

Community Standards | Fan Control Software

Please make sure to Quote me or @ me to see your reply!

Just because I am a Moderator does not mean I am always right. Please fact check me and verify my answer. 

 

"Black Out"

Ryzen 9 5900x | Full Custom Water Loop | Asus Crosshair VIII Hero (Wi-Fi) | RTX 3090 Founders | Ballistix 32gb 16-18-18-36 3600mhz 

1tb Samsung 970 Evo | 2x 2tb Crucial MX500 SSD | Fractal Design Meshify S2 | Corsair HX1200 PSU

 

Dedicated Streaming Rig

 Ryzen 7 3700x | Asus B450-F Strix | 16gb Gskill Flare X 3200mhz | Corsair RM550x PSU | Asus Strix GTX1070 | 250gb 860 Evo m.2

Phanteks P300A |  Elgato HD60 Pro | Avermedia Live Gamer Duo | Avermedia 4k GC573 Capture Card

 

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Lolucoca said:

 

I know. But it has 60 pins. 

IBM used a 60 pin SCSI interface called HDCN60.

Intel I9-9900k (5Ghz) Asus ROG Maximus XI Formula | Corsair Vengeance 16GB DDR4-4133mhz | ASUS ROG Strix 2080Ti | EVGA Supernova G2 1050w 80+Gold | Samsung 950 Pro M.2 (512GB) + (1TB) | Full EK custom water loop |IN-WIN S-Frame (No. 263/500)

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, Lolucoca said:

 

I know. But it has 60 pins. 

 

Quote

IBM's early RS6000 workstations sometimes used a "High Density Centronics" connector, which was a Centronics-style connector with smaller pins and shell. For some reason[citation needed] it had 60 pins, and is thus known as the "HDCN60"

From wikipedia.

FX-8350 | GA-990FXA-UD3 | G.SKILL 2x8GB 1600MHz | 1TB WD RE4 | CM Hyper 212 EVO | MSI R9 290x Lightning | Corsair AX860i | Silverstone FT05B-W

Pentium G3258 | MSI Z97 PC Mate | G.SKILL 4x4GB 1066MHz | 500GB Samsung 2.5" | Stock cooler | Pending GPU | EVGA 500B | Antec DF-35

GoPro Hero 3 Silver | Netgear R7000 Nighthawk with DD-WRT | HP Officejet Pro 8610 | Canon iP110 | AudioTechnica ATR2500 USB

Downdraft cooler for mITX board (new build) | Desk mount mic stand | Pop filter | Anti-vibration mount for microphone | mITX case | 3rd monitor (matching existing 23.1" | Intel Core i7-4790K (for mITX build)

Link to comment
Share on other sites

Link to post
Share on other sites

It will be f***** hard to find any adaptor, right? :P

i7 6700k - 32GB DDR4-2133 - GTX 980

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Lolucoca said:

I know. But it has 60 pins. 

there's a whole range of scsi connectors, some 3.5" hotswap hard drives for the datacenter of the day used 80pin connectors.

Link to comment
Share on other sites

Link to post
Share on other sites

Looks like Ultra SCSI, but that's just a proprietary IDE connector.

 

Intel Xeon E5 1650 v3 @ 3.5GHz 6C:12T / CM212 Evo / Asus X99 Deluxe / 16GB (4x4GB) DDR4 3000 Trident-Z / Samsung 850 Pro 256GB / Intel 335 240GB / WD Red 2 & 3TB / Antec 850w / RTX 2070 / Win10 Pro x64

HP Envy X360 15: Intel Core i5 8250U @ 1.6GHz 4C:8T / 8GB DDR4 / Intel UHD620 + Nvidia GeForce MX150 4GB / Intel 120GB SSD / Win10 Pro x64

 

HP Envy x360 BP series Intel 8th gen

AMD ThreadRipper 2!

5820K & 6800K 3-way SLI mobo support list

 

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Lolucoca said:

It will be f***** hard to find any adaptor, right? :P

Wrong, it will be harder than f****** hard to find a adapter.

Spoiler
Spoiler
Spoiler
Spoiler
Spoiler

It will be almost impossible

 

 

 

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×