Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[ProKoN]

Just out of curiosity, when I receive my 1GHz Pentium 3, 1.5GB of RAM and my FX5500, will I be able to post my scores here? Because I don't know if anyone has used cinebench on a P3 before, or if they will be classed as valid.

 

 

if it will cinebench

 

jumper will accept your submission. 

 

 

make sure to submit valid screenshots. read op in its entirety 

[Jumper118]

Just out of curiosity, when I receive my 1GHz Pentium 3, 1.5GB of RAM and my FX5500, will I be able to post my scores here? Because I don't know if anyone has used cinebench on a P3 before, or if they will be classed as valid.

it will depend on the os as to whether you can run them. i think you will only be able to run 2003, because it probably wont have the instructions to run 11.5. 

[Dabombinable]

it will depend on the os as to whether you can run them. i think you will only be able to run 2003, because it probably wont have the instructions to run 11.5. 

I'm making a cut down version of XP at the moment so the OS will be no problem (it needs to fit on a 420MB HDD), and according to the website any 1GHz CPU and 1GB of RAM will do, I was just concerned as to whether the results would be valid or not as they will be on a severely outdated machine.

Edit: the RAM speed is 133MHz BTW as I was unable to find any 140MHz or 150MHz kits at all, which will really through the system to the bottom of the list.

[ProKoN]

I may have degraded my intel quad cores. She was malnourished, cold, abused, left out in a junk pile to wither away. She was extra hungry for some voltage at first...but then I think she overate and became bloated. can no longer boot into windows past 1.7V  I guess I need more practice's rehabilitating central processing units.

 

i think these scores not entered in the doc (11.5 and r15) or you got little confused when entering them. #harry'sbacklog

 

http://linustechtips.com/main/topic/62476-post-your-cinebench-r15r1152003-scores-over-250-submissions/?p=3894675

[Jumper118]

I may have degraded my intel quad cores. She was malnourished, cold, abused, left out in a junk pile to wither away. She was extra hungry for some voltage at first...but then I think she overate and became bloated. can no longer boot into windows past 1.7V  I guess I need more practice's rehabilitating central processing units.

 

i think these scores not entered in the doc (11.5 and r15) or you got little confused when entering them. #harry'sbacklog

 

http://linustechtips.com/main/topic/62476-post-your-cinebench-r15r1152003-scores-over-250-submissions/?p=3894675

i think i've fixed it now. the R15 scores looked ok but i had a couple mixed up on th R11.5 sheet. 

[runit3]

Well, Z77 socket repaired to the point of running R15 with the sacrificial G645, and here is its miserable score

[ProKoN]

Well, Z77 socket repaired to the point of running R15 with the sacrificial G645, and here is its miserable score

R15.JPG

 C2D FTW

[ProKoN]

going chrome, firefox just crashed

[harrynowl]

I think 11.5/R15 require some newer version the SSE, probably SSE2. I believe P3 has the standard SSE instruction set. @.

[Master Disaster]

[Dabombinable]

I think 11.5/R15 require some newer version the SSE, probably SSE2. I believe P3 has the standard SSE instruction set. @.

Thanks, either way I will install both versions just to be sure. It will be fun to see just what this old rig can do.

Edit: dug out the compatibility list, and the P3 is listed as not supported, seems like the old version is the way to go.

[harrynowl]

Thanks, either way I will install both versions just to be sure. It will be fun to see just what this old rig can do.

I'm expecting a score of about 0.15-0.2

[Dabombinable]

I'm expecting a score of about 0.15-0.2

It depends on the CPU, I've got 2x slot 1 celerons, 1 at 300MHz with aftermarket cooler, 1 at 333MHz with stock cooling, a s370 Celeron 500MHz, P3 667MHz and a P3 1GHz on the way, I think I will see a variety of results, especially if I find some 150MHz 168pin SDRAM sticks (it will mean I can set the CPUB speed above 133MHz).

[Jumper118]

It depends on the CPU, I've got 2x slot 1 celerons, 1 at 300MHz with aftermarket cooler, 1 at 333MHz with stock cooling, a s370 Celeron 500MHz, P3 667MHz and a P3 1GHz on the way, I think I will see a variety of results, especially if I find some 150MHz 168pin SDRAM sticks (it will mean I can set the CPUB speed above 133MHz).

i know for a fact that super pi will work on a P3 i dont think i could get 2003 to work because the os i was using was windows 95.

[OCing Noob]

Well, Z77 socket repaired to the point of running R15 with the sacrificial G645, and here is its miserable score

R15.JPG

 

going chrome, firefox just crashed

 

i think i've fixed it now. the R15 scores looked ok but i had a couple mixed up on th R11.5 sheet. 

 

@ProKoN its specially for you ... its the second chip i've bought and this time i can show you that i've got another 5ghz + chip. Benchmarks on stock not on OC

 

[harrynowl]

@ProKoN its specially for you ... its the second chip i've bought and this time i can show you that i've got another 5ghz + chip. Benchmarks on stock not on OC

 

bench.jpg

5.10.jpg

why stress test the OC then not bench it??

[Jumper118]

@ProKoN its specially for you ... its the second chip i've bought and this time i can show you that i've got another 5ghz + chip. Benchmarks on stock not on OC

 

bench.jpg

5.10.jpg

i'm a bit confused. why does the 981cb say its at 4.4ghz. even with 3000mhz ram and a extremely efficient os and motherboard, you couldn't get that score with that clock? it must have been at least 4.8/4.9ghz. also can you please use cpuz and not crop the screenshots. i have a 4k monitor so i can see any size screenshot and you can always put them in a spoiler if you think they are too big.? 

[harrynowl]

i'm a bit confused. why does the 981cb say its at 4.4ghz. even with 3000mhz ram and a extremely efficient os and motherboard, you couldn't get that score with that clock? it must have been at least 4.8/4.9ghz. also can you please use cpuz and not crop the screenshots. i have a 4k monitor so i can see any size screenshot and you can always put them in a spoiler if you think they are too big.? 

he may have left speedstep on, but I still don't believe the 5.1ghz results without a CPU-Z

[OCing Noob]

i'm a bit confused. why does the 981cb say its at 4.4ghz. even with 3000mhz ram and a extremely efficient os and motherboard, you couldn't get that score with that clock? it must have been at least 4.8/4.9ghz. also can you please use cpuz and not crop the screenshots. i have a 4k monitor so i can see any size screenshot and you can always put them in a spoiler if you think they are too big.? 

i don't understand your question ...3000mhz ram ? where ? and why it has to be on 4.8 or 4.9? its on 4.4 how benchmark show it on 4.8 ? are you saying this chip is giving me false readings ?

[Jumper118]

he may have left speedstep on, but I still don't believe the 5.1ghz results without a CPU-Z

if he did then i can't see the clock speed without cpuz because at least cpuz shows the range of multipliers used . anyway hes got another 4 hours to sort it out cos my lunch break is over

i don't understand your question ...3000mhz ram ? where ? and why it has to be on 4.8 or 4.9? its on 4.4 how benchmark show it on 4.8 ? are you saying this chip is giving me false readings ?

yes. either its reading the clock speed wrong or it was a glitch. if you look at the spreadsheet then you will see that a haswell or dc i7 will get high 800's low 900's at 4.4ghz

[OCing Noob]

he may have left speedstep on, but I still don't believe the 5.1ghz results without a CPU-Z

do i need to disable speed step ? isn't it helping thing in saving power if i disable it my CPU remains on 4.0ghz but when its on after bit of idle time it comes down to 770mhz and the lowest temps and power consumption

[harrynowl]

i don't understand your question ...3000mhz ram ? where ? and why it has to be on 4.8 or 4.9? its on 4.4 how benchmark show it on 4.8 ? are you saying this chip is giving me false readings ?

He's saying the score you got on the test doesn't match other stock 4790K results, it's closer to a 4.8/4.9GHz 4790K

 

And he's saying to reach that score at 4.4GHz you'd need 3000MHz+ RAM speeds and a really clean OS

[OCing Noob]

if he did then i can't see the clock speed without cpuz because at least cpuz shows the range of multipliers used . anyway hes got another 4 hours to sort it out cos my lunch break is over

 

config what i have used was x51 BLCK 100.0 tweaker on Manual . CPU spread spectrum disabled .

[OCing Noob]

He's saying the score you got on the test doesn't match other stock 4790K results, it's closer to a 4.8/4.9GHz 4790K

 

And he's saying to reach that score at 4.4GHz you'd need 3000MHz+ RAM speeds and a really clean OS

oh ok .. i don't really know man once i put my ram on 2133mhz after reading alot of posts and ask brothers here . i'm just showing what i'm getting from software

[harrynowl]

oh ok .. i don't really know man once i put my ram on 2133mhz after reading alot of posts and ask brothers here . i'm just showing what i'm getting from software

well you're @1333mhz atm,

 

get your 5.1ghz clock going again and download cpu-z from cpuid.com

 

then stress test, validate and screenshot

 

then if you'd like to benchmark it, a 5.1ghz score will put you very high up the leaderboards here