Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[purple_rider]

1 hour ago, ScrappyZeDog said:

No I did cpu I got 34 but it didn't have multi or single core scores

@Jumper118 was trying to say that you forgot to include cpu-z in the screenshot. You need to bench again and open it in the end and include it in the screenshot. You can get cpu-z here:

 

http://www.cpuid.com/softwares/cpu-z.html

Edited August 20, 2017 by purple_rider
More details.

[mech]

1 minute ago, purple_rider said:

@Jumper118 mentioned that you forgot to include cpu-z in the screenshot. You need to bench again. You can get cpu-z here:

 

http://www.cpuid.com/softwares/cpu-z.html

Oh sorry I will do that soon

[mech]

Here is my cinebench with cpu z

[purple_rider]

That's better, and you got one point better!

57 minutes ago, ScrappyZeDog said:

Here is my cinebench with cpu z

           

           -image snippage-

 

[mech]

Just now, purple_rider said:

That's better, and you got one point better!

 

I know I am so happy I have a godly pc

[Jumper118]

thats better. yeah i forgot the z on the end of cpuz  

[connbob]

 

Ryzen 5 1600 @ 3.75GHz

1148cb Cinebench

67C Max temps

GTX 960 4GB

[Guest]

Getting a new chip for my board, going from 4(2) to 6(3) cores so why not push my current chip

 

1.6525v, max temp of 60c(EDIT: on air), 5ghz. Air cooled. GPU is a 290x but I haven't yet installed drivers so it's not showing up

[Guest]

made a slight gain, ignore my last one

5.08ghz, 1.6925v the most I could get. VRMS can't handle anything more and to get this to begin with I had to add a server 120mm fan at about 4000rpm cooling my VRM

[asand1]

Just replaced the X5680 that was causing BSODs with another and thought I would post some updates. This time I will run at the factory turbo speed of 3.6Ghz and leave the RAM at auto, as I think I FUBAR'd the IMC on the last one.

 

 

[TigzyGee]

Here's the score for my system. Tonight she seems to be running abit slow however, previously i have gotten between 450 and 501cb scores, tonight shes sitting at 383 and the previous run before the one i took the screenshot of ran a 390

[TigzyGee]

I just upgraded my old i5-3570 with a i7-3770, here's the Cinebench score's for the new setup.

[Jumper118]

1 hour ago, TigzyGee said:

I just upgraded my old i5-3570 with a i7-3770, here's the Cinebench score's for the new setup.

 

You should have got a 2600k instead they are much faster and normally cheaper. 

[TigzyGee]

2 hours ago, Jumper118 said:

You should have got a 2600k instead they are much faster and normally cheaper. 

Actually the price i got my 3770 for was very cheap so i couldnt pass up the opportunity to buy it ($100 AUS - $79 USD), otherwise i was still quite happy to stick with my 3570 for a while.

[Jumper118]

18 minutes ago, TigzyGee said:

Actually the price i got my 3770 for was very cheap so i couldnt pass up the opportunity to buy it ($100 AUS - $79 USD), otherwise i was still quite happy to stick with my 3570 for a while.

fair enough

 

[Cheddle]

noticed a distinct lack of TR results.....

 

CPUz is screwed ATM but this is a stock clocked CPU with Samsung d-die @ 2933mhzcl16

 

Ill share some OC'ed runs later

[Jumper118]

2 hours ago, Cheddle said:

noticed a distinct lack of TR results.....

 

CPUz is screwed ATM but this is a stock clocked CPU with Samsung d-die @ 2933mhzcl16

 

Ill share some OC'ed runs later

 

you need 18.0.1  

[Cheddle]

howboutdat

[TigzyGee]

Ive got a couple more results for you, first from an old Dell Vostro running an i7-860 and the 2nd from my HP Proliant DL380 G5 running x2 Xeon E5450's

[Jumper118]

1 hour ago, Cheddle said:

howboutdat

 

Dat d die doe. 

 

 

Holding the beast back. 

58 minutes ago, TigzyGee said:

Ive got a couple more results for you, first from an old Dell Vostro running an i7-860 and the 2nd from my HP Proliant DL380 G5 running x2 Xeon E5450's

 

You need to get some tech yes city Dealz on the h55/p55 and x58 and p35/45 so you can oc these potato chips

[TigzyGee]

8 minutes ago, Jumper118 said:

Holding the beast back. 

You need to get some tech yes city Dealz on the h55/p55 and x58 and p35/45 so you can oc these potato chips

Your not wrong there, i really do need a new mobo to replace the Dell board, believe it or not but the cpu socket has like 6 bent pins and she's still working miraculously, plus i just had a new X3450 CPU i ordered from Ebay arrive today which i need to test out aswell, not to mention the old Xeon 5150's from my HP Server. 

[Cheddle]

49 minutes ago, Jumper118 said:

Dat d die doe. 

 

 

Holding the beast back. 

You need to get some tech yes city Dealz on the h55/p55 and x58 and p35/45 so you can oc these potato chips

 

b-die in the post :-(

[Jumper118]

1 hour ago, Cheddle said:

 

b-die in the post :-(

Well at least it's o  the way

1 hour ago, TigzyGee said:

Your not wrong there, i really do need a new mobo to replace the Dell board, believe it or not but the cpu socket has like 6 bent pins and she's still working miraculously, plus i just had a new X3450 CPU i ordered from Ebay arrive today which i need to test out aswell, not to mention the old Xeon 5150's from my HP Server. 

Indeed. Oc=speed stock=slow

[The Benjamins]

4 hours ago, Cheddle said:

howboutdat

That is the fastest single socket system on our forums, NICE.

[WHWidjaja]

First Cinebench submission: