Jump to content

think i found rust in my case

mad dudy

so was doing something cleaning and i notice brown spots on the pci covers, looks like rust.

post-18118-0-01193600-1420171033_thumb.j

 

if you look at the top right there i tried to rub rub some off.

could the rust damage other parts of the pc like mobo? should i be worried about this?

didnt see rust anywhere else on the case. had the case for about a month.

 

case is Cooler Master HAF XB EVO, its even been near near water.

Link to comment
Share on other sites

Link to post
Share on other sites

take the peice out. and don't let any other metal touch it

 

its the best way to go about rust. remove it

~New~  BoomBerryPi project !  ~New~


new build log : http://linustechtips.com/main/topic/533392-build-log-the-scrap-simulator-x/?p=7078757 (5 screen flight sim for 620$ CAD)LTT Web Challenge is back ! go here  :  http://linustechtips.com/main/topic/448184-ltt-web-challenge-3-v21/#entry601004

Link to comment
Share on other sites

Link to post
Share on other sites

If you can isolate the issue, do so. The easiest way to clean it is with steel wool and some WD-40.

 

If you cant isolate it (like it already being on your MOBO case), dont worry too much. Just plan to replace your case at the next upgrade chance you have.

~Judah

Link to comment
Share on other sites

Link to post
Share on other sites

If you can isolate the issue, do so. The easiest way to clean it is with steel wool and some WD-40.

 

If you cant isolate it (like it already being on your MOBO case), dont worry too much. Just plan to replace your case at the next upgrade chance you have.

 

take the peice out. and don't let any other metal touch it

 

its the best way to go about rust. remove it

ill just remove them all then.  thanks

anyone know how it got there its never been near water.

Link to comment
Share on other sites

Link to post
Share on other sites

ill just remove them all then.  thanks

anyone know how it got there its never been near water.

the air is composed of 1% water vapor.

if it gets humide in the house from time to time. thats what might have caused it

 

basicly. pc's hate moisture

~New~  BoomBerryPi project !  ~New~


new build log : http://linustechtips.com/main/topic/533392-build-log-the-scrap-simulator-x/?p=7078757 (5 screen flight sim for 620$ CAD)LTT Web Challenge is back ! go here  :  http://linustechtips.com/main/topic/448184-ltt-web-challenge-3-v21/#entry601004

Link to comment
Share on other sites

Link to post
Share on other sites

If you've only had the case a month I'd return it, assuming you bought it new. If you can't return it, it looks like it's confined to the PCI slot blanks, which would be easy enough to replace, and probably cheaper than getting the stuff to save them.

Link to comment
Share on other sites

Link to post
Share on other sites

If you've only had the case a month I'd return it, assuming you bought it new. If you can't return it, it looks like it's confined to the PCI slot blanks, which would be easy enough to replace, and probably cheaper than getting the stuff to save them.

 not worth the time or work to bring such a big case to a UPS store and send it back to amazon. i ended up taking all of them out and put them in a bag and will let them rust i guess. not like they do anything useful.

Link to comment
Share on other sites

Link to post
Share on other sites

Check the rest of the case and the motherboard for any signs of rust / oxidation. Such issues not only occurs on PCI-E slots, but for any metal that is exposed to water + air.

The common type of metals used in PC components are Aluminum, Copper, and Steel. All can suffer from oxidation over time if they are exposed -- not protected by paint coating, protective surface coating, or controlled oxidation (i.e anodizing, nickel plating, etc).

Rust acts as a catalyst to itself and will accelerate its speed in eating away / spreading to the nearby metal material if not dealt with. (this is getting into 1st / 2nd year university level Chemisry so I‘ll stop here)

Intel Z390 Rig ( *NEW* Primary )

Intel X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)

  • i7-8086K @ 5.1 GHz
  • Gigabyte Z390 Aorus Master
  • Sapphire NITRO+ RX 6800 XT S.E + EKwb Quantum Vector Full Cover Waterblock
  • 32GB G.Skill TridentZ DDR4-3000 CL14 @ DDR-3400 custom CL15 timings
  • SanDisk 480 GB SSD + 1TB Samsung 860 EVO +  500GB Samsung 980 + 1TB WD SN750
  • EVGA SuperNOVA 850W P2 + Red/White CableMod Cables
  • Lian-Li O11 Dynamic EVO XL
  • Ekwb Custom loop + 2x EKwb Quantum Surface P360M Radiators
  • Logitech G502 Proteus Spectrum + Corsair K70 (Red LED, anodized black, Cheery MX Browns)

AMD Ryzen Rig

  • AMD R7-5800X
  • Gigabyte B550 Aorus Pro AC
  • 32GB (16GB X 2) Crucial Ballistix RGB DDR4-3600
  • Gigabyte Vision RTX 3060 Ti OC
  • EKwb D-RGB 360mm AIO
  • Intel 660p NVMe 1TB + Crucial MX500 1TB + WD Black 1TB HDD
  • EVGA P2 850W + White CableMod cables
  • Lian-Li LanCool II Mesh - White

Intel Z97 Rig (Decomissioned)

  • Intel i5-4690K 4.8 GHz
  • ASUS ROG Maximus VII Hero Z97
  • Sapphire Vapor-X HD 7950 EVGA GTX 1070 SC Black Edition ACX 3.0
  • 20 GB (8GB X 2 + 4GB X 1) Corsair Vengeance DDR3 1600 MHz
  • Corsair A50 air cooler  NZXT X61
  • Crucial MX500 1TB SSD + SanDisk Ultra II 240GB SSD + WD Caviar Black 1TB HDD + Kingston V300 120GB SSD [non-gimped version]
  • Antec New TruePower 550W EVGA G2 650W + White CableMod cables
  • Cooler Master HAF 912 White NZXT S340 Elite w/ white LED stips

AMD 990FX Rig (Decommissioned)

  • FX-8350 @ 4.8 / 4.9 GHz (given up on the 5.0 / 5.1 GHz attempt)
  • ASUS ROG Crosshair V Formula 990FX
  • 12 GB (4 GB X 3) G.Skill RipJawsX DDR3 @ 1866 MHz
  • Sapphire Vapor-X HD 7970 + Sapphire Dual-X HD 7970 in Crossfire  Sapphire NITRO R9-Fury in Crossfire *NONE*
  • Thermaltake Frio w/ Cooler Master JetFlo's in push-pull
  • Samsung 850 EVO 500GB SSD + Kingston V300 120GB SSD + WD Caviar Black 1TB HDD
  • Corsair TX850 (ver.1)
  • Cooler Master HAF 932

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to comment
Share on other sites

Link to post
Share on other sites

Check the rest of the case and the motherboard for any signs of rust / oxidation. Such issues not only occurs on PCI-E slots, but for any metal that is exposed to water + air.

The common type of metals used in PC components are Aluminum, Copper, and Steel. All can suffer from oxidation over time if they are exposed -- not protected by paint coating, protective surface coating, or controlled oxidation (i.e anodizing, nickel plating, etc).

Rust acts as a catalyst to itself and will accelerate its speed in eating away / spreading to the nearby metal material if not dealt with. (this is getting into 1st / 2nd year university level Chemisry so I‘ll stop here)

ill do another check of case monday when i replace the mobo, dropped a few thumb screws on the mobo and broke the lan port some how.

@CM Norumu should there be any reason why the pci slots had rust on them so quick?

Link to comment
Share on other sites

Link to post
Share on other sites

Seems like a cheap case/company. Or they outsourced a cheap company to make those peices. I would just take them out if there isn't any in the case.

Main RIg Corsair Air 540, I7 9900k, ASUS ROG Maximus XI Hero, G.Skill Ripjaws 3600 32GB, 3090FE, EVGA 1000G5, Acer Nitro XZ3 2560 x 1440@240hz 

 

Spare RIg Lian Li O11 AIR MINI, I7 4790K, Asus Maximus VI Extreme, G.Skill Ares 2400 32Gb, EVGA 1080ti, 1080sc 1070sc & 1060 SSC, EVGA 850GA, Acer KG251Q 1920x1080@240hz

 

Link to comment
Share on other sites

Link to post
Share on other sites

  • 2 weeks later...

ill do another check of case monday when i replace the mobo, dropped a few thumb screws on the mobo and broke the lan port some how.

@CM Norumu should there be any reason why the pci slots had rust on them so quick?

Hi! Sorry, I was off at CES last week, and trapped in some internal workshops this week, so I haven't had the chance to come around for a while.

 

This is certainly a very odd situation. If you haven't already taken care of things, I always recommend contacting our support team as the first and foremost in getting assistance and making sure we get records of these kinds of things.

 

From what I can see, it looks like it's just the expansion slot covers with this rust issue. I couldn't tell you what is causing it, as the HAF XB EVO uses SECC with corrosion protection. The covers on this one could have come from some kind of bad or contaminated batch, or there could have been some external reason (ie shipping issues) for it. If it's just those covers, though, they can be replaced. Our warranty covers parts replacements, and you can find expansion slot covers online as well.

 

So, again, talk to our support team. We do warranties for a reason, and this is certainly a weird issue I've never seen before.

Cooler Master USA representing! Looking for help? Head to the CM Fanzone to get in touch with the Customer Support team!

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×