OLED anti burn-in software?

[CoolJosh3k]

Does the software for preventing burn-in on OLED monitors require Windows, or is it all managed entirely on the monitor? For example, could I have a Switch console connected to an OLED monitor for the entire life of that monitor and be fine?

 

What about cases where the software works without Windows, but a Windows PC is still needed to configure (and maybe even setup) the anti burn-in software on occasion?

[Shimejii]

The only use those have is for Image retention issues, NOT burn in. They are helpful for when you have a monitor that gets stuck pixels a ton (Like a Nixeus monitor or one of the cheaper brands).

 

OLED monitors/screens have built in burn in management, Thats pretty much all you need to use besides taking good care of it.

[GuiltySpark_]

Black wallpaper, hidden taskbar, short timer for display sleep/screen saver, enable the burn in prevention tools on your display and read your warranty. 
 

All you can do and if you’re not ok with that buy something else. Burn in can and very well may still happen no matter what, have to be ok with living with that fact. No one can tell you that if you do “x” it won’t. 
 

I’m sticking with OLED until something better comes along, it’s too good. 

[Eigenvektor]

12 minutes ago, CoolJosh3k said:

or is it all managed entirely on the monitor?

It should be managed by the monitor itself, e.g. with pixel shift, logo detection and similar things. Example:

https://www.msi.com/blog/how-msi-oled-care-prevents-oled-from-burn-in

[xg32]

30 minutes ago, CoolJosh3k said:

Does the software for preventing burn-in on OLED monitors require Windows, or is it all managed entirely on the monitor? For example, could I have a Switch console connected to an OLED monitor for the entire life of that monitor and be fine?

 

What about cases where the software works without Windows, but a Windows PC is still needed to configure (and maybe even setup) the anti burn-in software on occasion?

the monitors should take care of it, but i have a all black screensaver on a 1minute timer just in case, 18months in, no issues.

[Stahlmann]

All the necessary burn-in measures are on the monitor.

 

I've been using a LG C2 for over a year and haven't had any issues yet. I'm not hiding my task bar because it's pretty inconvenient imo and the hiding behavior is very inconsistent. The only thing I did in Windows is that i set the screen saver to kick in after 10 minutes of inactivity.

 

I also don't just use a black or animated wallpaper. Wallpaper engine isn't as effective at preventing burn-in as some people think it is, because burn-in happens with cumulative wear. Burn-in won't just happen overnight if you forget to turn the monitor off once.

[CoolJosh3k]

Thanks for letting me know.

[Andrewtst]

As long you don’t turn off burn-in preventive measures from the monitor itself, you are good to go.

 

I do extra set screen saver auto run after idle for 2 mins and auto off the monitor after 5 minutes.

 

Others than that, I used as usual Windows Taskbar on (not auto hide) and with wallpaper I prefer (not black colour)

 

So far so good my WOLED and QD-OLED monitor.