Jump to content

Want to Upgrade my Cpu Amd fx 4300 to higher end amd fx series

KARTHIK_BANDARI
 Share
Posted

Hii every one, I want to upgrade my amd fx 4300 cpu to higher end amd fx series but I want to replace  the processor only 

I have following spec of my computer hard ware suggest me the processor with amd fx higher end series will support to my computer hard ware 

Am3+  

GIGABYTE GA-78LMT-USB3.0 Motherboard 

and I will upgrade my 4GB ram to 8gb there is a extra slot available for another 4ram so, totally 8gb internal ram 

please suggest me guys.

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

A 8300, 8310 or a 8320e would be a nice upgrade and that motherboard should handle it at stock without problems.

FX6300 @ 4.2GHz | Gigabyte GA-78LMT-USB3 R2 | Hyper 212x | 3x 8GB + 1x 4GB @ 1600MHz | Gigabyte 2060 Super | Corsair CX650M | LG 43UK6520PSA
ASUS X550LN | i5 4210u | 12GB
Lenovo N23 Yoga

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Any FX 8xxx CPUs at stock settings then. Better update the BIOS to the latest release before you change the CPU.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
5 hours ago, KARTHIK_BANDARI said:

Hii every one, I want to upgrade my amd fx 4300 cpu to higher end amd fx series but I want to replace  the processor only 

I have following spec of my computer hard ware suggest me the processor with amd fx higher end series will support to my computer hard ware 

Am3+  

GIGABYTE GA-78LMT-USB3.0 Motherboard 

and I will upgrade my 4GB ram to 8gb there is a extra slot available for another 4ram so, totally 8gb internal ram 

please suggest me guys.

 

What for? If this is for gaming you are unlikely to see any gained performance. Even the best fx cpu cannot play certain new games at 60 fps anymore due to it being so weak. Used fx cpu's tend to also still be very expensive and they are not worth the money at all. I would recommend you basically save up.

 

As for upgrades DO NOT go past a fx4300. The board can support higher core count fx cpu's BUT IT FRIES ITSELF. It is a terrible motherboard that can and will die when even a fx6300 is used (this is from personal experience back in the day with this one and the asus 780 chipset one and well hunderds of people online). These boards were not made to handle anything but the lowest end cpu's and it shows.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×