Questions about the compatibility of these upgrading parts

[mqmqmq]

So I'm planning to increase the aesthetics of my pc by buying a Phanteks Vertical GPU Bracket, Phanteks Neon Digital RGB LED Kit (1m), and either one or three Aerocool Mirage 12 ARGB 120mm Fans. I just wanted to make sure these parts are all compatible with my current build https://au.pcpartpicker.com/user/DiVidz/saved/7bMbLk.

1. Will my motherboard have enough connectors for three additional rgb fans?

2. Will a vertical 2080 strix even fit in the lancool 215?

3. Could I install two fans at the bottom of the case; will the vertical gpu block it? One fan will be to replace the rear fan of the case.

4. Are these fans any good or loud? These were just like the first ones I saw, and they're very cheap.

5. What's this with the rgb hub for the fans? Are they supposed to connect to the motherboard or the hub?

6. Will the vertical gpu be blocking anything essential?

7. Will I have to use different RGB software for the fans and rgb strips?

8. What else could I add to my pc?

[Ozzy2020]

13 minutes ago, mqmqmq said:

So I'm planning to increase the aesthetics of my pc by buying a Phanteks Vertical GPU Bracket, Phanteks Neon Digital RGB LED Kit (1m), and either one or three Aerocool Mirage 12 ARGB 120mm Fans. I just wanted to make sure these parts are all compatible with my current build https://au.pcpartpicker.com/user/DiVidz/saved/7bMbLk.

1. Will my motherboard have enough connectors for three additional rgb fans?

2. Will a vertical 2080 strix even fit in the lancool 215?

3. Could I install two fans at the bottom of the case; will the vertical gpu block it? One fan will be to replace the rear fan of the case.

4. Are these fans any good or loud? These were just like the first ones I saw, and they're very cheap.

5. What's this with the rgb hub for the fans? Are they supposed to connect to the motherboard or the hub?

6. Will the vertical gpu be blocking anything essential?

7. Will I have to use different RGB software for the fans and rgb strips?

8. What else could I add to my pc?

Idk about questions 2-8 but to anwser your first one here is a list straight from the manufactures website:

- 1 x SPI TPM Header
- 1 x Power LED and Speaker Header
- 2 x RGB LED Headers*
- 2 x Addressable LED Headers**
- 1 x CPU Fan Connector (4-pin)***
- 1 x CPU/Water Pump Fan Connector (4-pin) (Smart Fan Speed Control)****
- 4 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan Speed Control)*****
- 1 x 24 pin ATX Power Connector (Hi-Density Power Connector)
- 1 x 8 pin 12V Power Connector (Hi-Density Power Connector)
- 1 x 4 pin 12V Power Connector (Hi-Density Power Connector)
- 1 x Front Panel Audio Connector
- 2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD Protection)
- 2 x USB 3.2 Gen1 Headers (Support 4 USB 3.2 Gen1 ports) (Supports ESD Protection)
 

[Legoxi]

21 minutes ago, Ozzy2020 said:

Idk about questions 2-8 but to anwser your first one here is a list straight from the manufactures website:

- 1 x SPI TPM Header
- 1 x Power LED and Speaker Header
- 2 x RGB LED Headers*
- 2 x Addressable LED Headers**
- 1 x CPU Fan Connector (4-pin)***
- 1 x CPU/Water Pump Fan Connector (4-pin) (Smart Fan Speed Control)****
- 4 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan Speed Control)*****
- 1 x 24 pin ATX Power Connector (Hi-Density Power Connector)
- 1 x 8 pin 12V Power Connector (Hi-Density Power Connector)
- 1 x 4 pin 12V Power Connector (Hi-Density Power Connector)
- 1 x Front Panel Audio Connector
- 2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD Protection)
- 2 x USB 3.2 Gen1 Headers (Support 4 USB 3.2 Gen1 ports) (Supports ESD Protection)
 

Addiciton for question number 1, If somehow your Mobo don't have enough Cha Fan Connector you can always buy a Fan Splitter/ Fan Hub.

[Ozzy2020]

Just now, Legoxi said:

Addiciton for question number 1, If somehow your Mobo don't have enough Cha Fan Connector you can always buy a Fan Splitter/ Fan Hub.

Yes you are right but would it be enough power? For example my mobo allows 12 volts to each fan connector so if you split multiple fans onto one connector would the fans have to be underpowered to work?