sponsored BLACK HAWK scratch build SPONSORED *HWLEGEND MODDING TEAM*

[mayhem_modz]

problem with the brackets of the feet I have to find a different solution or not to glue them but assemble them with screws I make them again for the third time !!!



















I was forgetting an important thing ..... the power button !!!
2 are a startup and one a reset.
I place it on the bottom side on the right side panel. this consists of 3 panels
1 outside
1 below (for leds)
1 of cover located inside, I have to puncture all three but with great precision,









the fantastic buttons sponsored by PHOBIA







next phase, positionally led strips inside the panels and some tricks ... and we proceed to painting

[mayhem_modz]

I know ... I know what you are thinking ... yes yes nice but the mod when it arrives?
everything now begins to take shape, a lot of preparatory work was needed but now the time has come to paint and assemble ..
preparation of the frame with clinging primer









for the anthracite gray basic covers, application of the logos cut out with a plotter and then matt black

 

[mayhem_modz]

painting of the first panels, base in glossy anthracite gray and then a coat of matt black.

 

[mayhem_modz]

waiting for the panels to dry, in all there are 25 that make up the mod, I proceed with the break-ins of the intermediate panels of the sides and internal logo panel or those that will contain the LEDs, prepared for some time.

 

[mayhem_modz]

cutting and preparing mesh for roofing panels







[VIDEO]

 

[mayhem_modz]

waiting for the painted grids to dry proceed with other.
insertion of the led strips in the side and front and top panels.





I use these connectors which are very easy to install, they are clip-on and there is no need to solder anything, I match them a bit because they are not at the same level as the 4 mm plexi











this is the intermediate panel since the covering ones are black and absorb all the light I apply white vinyl in this way the light will feed well and will also shoot on the edge

[mayhem_modz]

assembly of the front and top covers which also house the 5 120 mm alphacool 3 fans on the top and 2 on the inlet

 

[mayhem_modz]

another prestigious sponsor joins the party, the fantastic CRUCIAL BALLISTIX TRACER arrive, perfect for this project, a generous 32 GB kit !!!!





specifiche produttore https://ballistixgaming.com/products/dram/tactical/tactical-tracer-ddr4-rgb.html

unboxing video with music for the most demanding ...

[mayhem_modz]

I am very happy to collaborate with this company, the CRUCIAL which, in addition to providing me with the ram, now also sends me 2 ssd BX 240 GB
realization of internal led panels for covering.















unboxing here enjoy!

 

 

[mayhem_modz]

finishing last rgb paneld before to the final assembling...

 

 

[mayhem_modz]

now all the panels are ready let's start assembling this black beast
let's start with an asus ROG STRIX Z570-F GAMING motherboard offered by my sponsor PC HUNTER



the CRUCIAL BALLISTIX TACTICAL rams were not missing, also these offered by Crucial



assemblaggio preliminare delle coperture

 

[mayhem_modz]

the time has come to unpack the alphacool gifts were months in the box waiting to be used



two fans at the bottom inlet, I calculated the air flow that starts from the bottom and rises upwards while on the front panel the 2 120mm fans are inlet.



will be hidden by the lower panel in fact these 2 were part of the aio cooling system of alphacool non rgb, I ordered 3 more additional fans to mount them on.







the aio alphacool eisbaer LT system that I am going to install has a thin radiator.

 

[mayhem_modz]

technical tests for RGB connection and fans
Alphacool, sent me this hub controller device to which to connect all the rgb strips and fans
controllable from smartphone with app downloadable from google play
I must say that it works very well, many programming keys and settings.

 

[mayhem_modz]

after a pause he picks up the beast again
we are at the final stages of assembling the RGB cable connection panels some shots







































next and last step to create a backplate for this ...



once again thanks SAPPHIRE !!

[mayhem_modz]

realization of the LED backplate of the sapphire pulse 5700xt graphics card
it is divided into 3 pieces, the underlying slab with RGB 4MM LEDs and the cover divided into 2 2MM pieces, leaving a glimpse of the underlying LEDs but let's start with order.











rog-like strips preparation in theme with mod.







if you make a mistake you have to redo the panel ....



bending





painting now all that remains is to wait for the next day and finish it.

 

 

realization of the LED backplate of the sapphire pulse 5700xt graphics card
it is divided into 3 pieces, the underlying slab with RGB 4MM LEDs and the cover divided into 2 2MM pieces, leaving a glimpse of the underlying LEDs but let's start with order.

 

 

 

 

 

 

rog-like strips preparation in theme with mod.

 

 

 

 

if you make a mistake you have to redo the panel ....

 

 

bending

 

 

 

painting now all that remains is to wait for the next day and finish it.

 

 

 

 

[mayhem_modz]

now that all the parts are dry, we proceed with the peeling and assembly of the blackplate







test leds





















card assembling

 

[mayhem_modz]

well guys we got to the end of this mod which took between stop and go almost a year here are the final photos.















go with the light..











































MOTHERBOARD ASUS STRIX X570-F GAMING
CPU AMD RYZEN 5 3600
RAM CRUCIAL BALLISIX TACTICAL TRACER 36GB
SSD CRUCIAL BX 240 GB x2
GPU AMD SAPPHIRE RADEON RX 5700XT

PSU SHARKOON SILENT STORM COOL ZERO 850W
PSU FANS RGB 120 MM ALPHACOOL Eiszyklon Aurora RGB LT
ILLUMINAZIONE STRISCE LED ALPHACOOL Aurora Flexlight 500cm - RGB
CONTROLLER ALPHACOOL Eis-Matrix Aurora Controller
CABLES AND SWITCH PHOBYA

the official video

 

 

[mayhem_modz]

[mayhem_modz]

It was a long time since I wanted to make a fligh case, and today the time has come, I don't open another post because it concerns the mod already made BLACK HAWK this need because I need to transport BH for events and fairs and put it in the warehouse when not in use and it was necessary to create a case for it, since there is no container for sale I decided to build it.
start the construction of the lower section.

 

[mayhem_modz]

to be continued...

[mayhem_modz]

top preparation with application of the handles.

 

[mayhem_modz]

last cover closing panel.





before applying the hinges and corner protectors I have to make sure that everything fits perfectly, the waste is minimal.







I hold still with self-locking pliers so that when I make the holes nothing moves, it is very important





if you err by 1/4 of a millimeter the closure will not match and it would be pain.





also fixed the upper part of the hinge.









the next step will be to insert the padding

[mayhem_modz]

positioning of the padding

 

[mayhem_modz]

update

 

[mayhem_modz]

last passage lateral writings and fixing of the packaging.







temporary fixing padding with double-sided tape this allows me to evaluate well and make changes









I fix the foam panels with spray glue applied on both sides













now it's really over ..