sponsored BLACK HAWK scratch build SPONSORED *HWLEGEND MODDING TEAM*

[mayhem_modz]

 

Hi guys here my new project a scratch build hand made it's hard mod
SPONSORS ARE WELCOMED enjoy!




Here the project



starting with aluminium bars to build the frame.

 

[mayhem_modz]

[mayhem_modz]

 

[mayhem_modz]

 

[mayhem_modz]

 

[mayhem_modz]

here bottom panel with 12mm fans in exit holes.

 

[mayhem_modz]

motherboard plate adaptor for water cooling clock

 

[mayhem_modz]

update side panels

 

[mayhem_modz]

side panel

[mayhem_modz]

a new sponsor arrived today!!! very special thanks so alpha cool

 

[mayhem_modz]

after many months my work begins to complete this mod.

















si prosegue con il pannello laterale













.

[mayhem_modz]

cover panel












 

[mayhem_modz]

construction and application of intermediate panels where the leds will be positioned, these panels will act as sandwiches and will have a luinous effect on the edge of the roof panel
















 

[mayhem_modz]

completing sandwich panels











 

[mayhem_modz]

manual cutting NO CNC...

 

[mayhem_modz]

completion of the upper and front panels, I added panels worked with incisions, then the graphics will be applied during the painting phase

















symbol cut that will be positioned on the right side of the case and will be led




 

[mayhem_modz]

I realized that the feet made previously were too small ... I'll do them again ...




















 

[mayhem_modz]

he need arises to create a bracket for the psu, the solution I had conceived earlier is not good, cutting the aluminum strips, fixing the lower part with rivets, the upper one can be disassembled with screws, this bracket is fixed in the case with rivets at the bottom, this means that the power supply can be removed easily.




















 

[mayhem_modz]

inside panels 2 pieces

[mayhem_modz]

[/align]

 

[mayhem_modz]

well after a break I resume ..
arrangement of the lower panel and shaping to facilitate the installation of this fantastic ASUS STRIX X-570 F gaming motherboard thanks to my sponsor PCHUNTER.it store
unboxing here










inside panel

[mayhem_modz]

creation of the bracket for the archive disks, I use my old ones for the size.

[mayhem_modz]

well guys go ahead, the project is well under way, I do a lot of background work in this way i will get better later and i will go even faster ..

today I prepare the supports for the internal panel that will contain the cables and the 2.5-inch hard drive storage bays, the ssd that will contain the operating system will be positioned outside.
I create the supports from soft steel pipes on which the panels will be mounted I use a pipe cutter.







adoro questo strumento ha un taglio perfetto...



una volta ricavati i supporti uso la punta filettante per creare il filetto









ora è la volta del pannello come fatto per gli altri non sara altro che un sandwich pannelli in acrilico da 2 mm e 5 mm quello centrale che conterrà i leds.







posizionalento dei supporti

 

[mayhem_modz]

I go ahead .. preparation for external ssd positioning, they will have led covers that I will make later, I also arrange the logo of the eagle also with led.







I fix the 2 discs to the panel with its screws



drilling for sata and power data cables



let's move on to the eagle it will be fixed with screws to the case, inside I will make an opening with a small rgb led strip, I will place on it the second thinner panel (2 mm) painted black, this will hide the screws, once turned on you will only see the contour with a pleasant effect.

 

[mayhem_modz]

proceed with the finishing of the external panel and housing ssd
 

Spoiler

 

Spoiler

 

Spoiler

 

Spoiler

 

Spoiler

I realized that the case begins to have a certain weight, due to the reinforcement of the legs made previously.
 

Spoiler

 

Spoiler

 

Spoiler

 

Spoiler

 

 

Edited April 6, 2020 by SansVarnic
photos placed in spoilers