Jump to content

Experiment Nr. 5 (Final pics on page 8)

p0Pe
By p0Pe
in Build Logs
 Share
Posted
  • Author

That  24pin <3

 

Glad you like it:D

 

i love how you just have a random cpu lying around on your table. I mean, i have one here too but mine is an old E6750 whereas this one looks a whole lot newer! :D

Love that build too btw ^^ But where did you get these cable spacing things you used on the 24pin? You got them from the US cause i dont know of a place to get them here in europe.

 

They are E22 cable combs. You can get them directly from the guy making them here: www.e22.biz - He is located in the UK, so you should be good if you are in europe:)

 

 

very nice :)

 

I need to find where I can get those acrylic cable management pieces in Australia...

 

How do you find the SteelSeries H's? I really want a set :D

 

Write Nate from E22 a message and ask him. I am sure he ships to australia. Not sure if he has a reseller in aus yet though.

 

I worked a year at SteelSeries as a product developer, so I have most of their gear. Right now I am using the H wireless and the RIVAL mouse. The 9H is used for road trips and as a phone headset. It is lovely, but cannot compete with the features of the H wireless which i friggin LOVE!

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

PORN

Desktop - Corsair 300r i7 4770k H100i MSI 780ti 16GB Vengeance Pro 2400mhz Crucial MX100 512gb Samsung Evo 250gb 2 TB WD Green, AOC Q2770PQU 1440p 27" monitor Laptop Clevo W110er - 11.6" 768p, i5 3230m, 650m GT 2gb, OCZ vertex 4 256gb,  4gb ram, Server: Fractal Define Mini, MSI Z78-G43, Intel G3220, 8GB Corsair Vengeance, 4x 3tb WD Reds in Raid 10, Phone Oppo Reno 10x 256gb , Camera Sony A7iii

Link to comment
Share on other sites
Link to post
Share on other sites
  • 2 weeks later...
Posted
  • Author

It's more than just a 'small' teaser.  :wub: 

 

A smaller teaser would be a macro of a fan of that case. 

 

Haha, well, more will come soon :)

 

PORN

 

:D

 

SpaceNavigator? Very nice!

 

I need a career change... 

 

It does not take a career change to get a spacenavigator mate ;P

 

Small update, but an update never the less:D
 
001.JPG
 
Needed to mount the fans to the side of the pedestal. I wanted to mount them so that I could easily take them out and clean it. I also did not want the radiators to get loose if I wanted to take out the fans.
 
002.JPG
 
They sit in place by friction, and can be pulled out if they have to.
 
003.JPG
 
And the spacers used.
 
Simple is better:D
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

@p0Pe That spacer thing is actually quite clever :) Do they fit tight ? I would be worried about vibrations.

My modded Air 540 build

Spoiler

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

@p0Pe That spacer thing is actually quite clever :) Do they fit tight ? I would be worried about vibrations.

there are no moving parts attached to the mobo tray, so i dont think it will vibrate :)  

CPU:  i7 5820k  @4.0Ghz Cooler: Thermaltake Nic C5 Motherboard: MSI X99A SLI PLUS  Ram: 8 gb @2133Mhz GPU: Gigabyte GTX 970 G1 @1560  Case: Proprietary Sun Ultra 24  Storage: HyperX 120gb & 1 TB WD Green PSU: Cooler Master 550w 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

It does not take a career change to get a spacenavigator mate ;P

 

Very true, but I want to get into Industrial/Product Design. Studying when working fulltime is a bit of a dilemma though :(

My VERY Watercooled R4 'BOTW' | [WIP] StreamMachine Build Log | ARCADE-D2 | [WIP] NCASE MiniValidus Build Log | DIY AMBILIGHT Tutorial

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

[spoiler= My "gaming rig" ]

  • CPU: Intel i5 2500
  • Motherboard: Asrock B75M-GL R2.0
  • RAM: 1x4 GB 1333 Mhz Kingston, 1x4 GB 1333 Mhz Transcend
  • GPU: MSI GTX 770 Gaming OC 2 GB
  • Case: Zalman Z3 plus white
  • Storage: WD Blue 500 GB, WD Black 1 TB
  • PSU: LC POWER 650W ATX v2.3 80+ bronze
  • Display(s): Acer V223HQ
  • Cooling: Scythe SCKTN-3000
  • Keyboard: CoolerMaster QuickFire TK MX blue
  • Mouse: Sharkoon Fireglider Laser Mouse
Link to comment
Share on other sites
Link to post
Share on other sites
  • 3 months later...
Posted
  • Author

@p0Pe That spacer thing is actually quite clever :) Do they fit tight ? I would be worried about vibrations.

 

They fit quite tight, so vibration is no issue. I do, however, have some small issues with vibrations from the pumps, but I cant really do anything about that now :/ Good thing that the box is build so that it can be tucked away under the table :D

 

So guys! Time for an update! I will quickly go over how the inner parts of the system looks before we move on to something a bit more dramatic, and proberly what most people have been waiting for (cnc pr0n!)
 
sBzqVAg.jpg
 
The pedestal watercooling box, cooled by two EK 280mm XTC radiators and four Corsair 140 mm fans.
 
GisEqdV.jpg
 
Pedestal again, from the rear. Right now I am using some random fittings as I did not have any bitspower that would fit the hoses, but these have since been swapped out. Right below the tubing exits, you can see the power plug that powers the pedestal.
 
9Qveeh7.jpg
 
stable at 30 degrees. Fans turn off when under 30, and switch on at 40% speed at over 30 degrees.
 
0nHBKwF.jpg
 
Here you can spot the EK Impact block sitting under the interconnect plate. The interconnect plate is covering most of the ASUS Impact motherboard, and I think it will look really good when I get some dye in the fluid!
 
You can also see that I finished up the sleeving and tidied it all up with some E22 cable combs. These things truly does wonders:D
 
zVWRHQu.jpg
 
Front view.
 
EiTYyRF.jpg
 
Fans removed to better see the sleeving. The sleeving is held together with E22 cable combs.
 
74rjd2a.jpg
 
Closeup of the ram block in the interconnect, and more sleeving :D
 
tlc8ykj.jpg
 
You know you are running mini itx when your cooling system is around the same size as your PC :D
 
Thats all for now folkes! I will be back shortly with a CNC update! But until then, here is a small teaser:
 
rfpHrz9.jpg
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

@p0Pe Oh, I love this little thing :) I am quite interested how the CNC parts gonna look.

 

P.s. Do you still gonna do that HDD cover ? That plastic prototype looked sweet :)

My modded Air 540 build

Spoiler

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

@p0Pe Oh, I love this little thing :) I am quite interested how the CNC parts gonna look.

 

P.s. Do you still gonna do that HDD cover ? That plastic prototype looked sweet :)

 

Thanks man. I think i will do it, but it does not have the highest priority right now. I actually got a test piece made of the hdd cover that you can see on my facebook: https://www.facebook.com/DesignsByHPS

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Awesome!

CPU: i5 2500k@4.2 MBO: Asrock P67 Extreme4 GPU: Gigabyte GTX 560Ti 1GB RAM: Corsair 8GB 1600 SSD: Samsung 840 Basic 250 HDD: Samsung F3 1TB + WD 2TB Green + WD MyBook 1TB external; ODD: LG BD/DVDRW; PSU: Corsair TX 650
Case: Fractal Define R3 Black Pearl; Mouse/Keyboard Logitech Performance MX + Wireless K800; Monitor: Dell U2311H 
 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I lack the vocabulary to elaborate just how truly exceptional this build is.

 

Bravo! 

9900K  / Noctua NH-D15S / Z390 Aorus Master / 32GB DDR4 Vengeance Pro 3200Mhz / eVGA 2080 Ti Black Ed / Morpheus II Core / Meshify C / LG 27UK650-W / PS4 Pro / XBox One X

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

You have truly made me horny

 

Not sure if good or bad :D

 

Did you model the triangle side panels?

 

Yes. All the 3D models you see in this thread is made and rendered by me.

 

Awesome!

 

Thanks man!

 

I lack the vocabulary to elaborate just how truly exceptional this build is.

 

Bravo! 

 

I think you nailed it quite well:D

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Excrutionarilinary good :D

 

Haha well, if Valermos is missing some words in his vocabulary, then I think I know where they went:P

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Haha well, if Valermos is missing some words in his vocabulary, then I think I know where they went:P

I dont get it :S. Do you like my word i made up :D Looked at your portfolio. I like the food one :D

Steve

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I dont get it :S. Do you like my word i made up :D Looked at your portfolio. I like the food one :D

 

I was referring to the reply by Valermos :P And thanks! I really, REALLY like food:P

 

Holy crap!! This looks amazing  :o

 

Thanks man! More should be coming soon!

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I was referring to the reply by Valermos :P And thanks! I really, REALLY like food:P

I like food too. Highfive

Steve

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Build Logs

×