Jump to content

Help with attempting a better looking pipe

Hi guys first time posting here. I just recently set up a dual radiator set up and im having some trouble on a complicated bend off the top of the CPU block from the radiator. Any ideas how I might route this to look better? I know my tube going back into the pump needs to be shortened a little bit as well. This is my first time attempting watercooling so be easy on me lol.

 

 

sdfsdfsdf.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, Silentkiller123 said:

Hi guys first time posting here. I just recently set up a dual radiator set up and im having some trouble on a complicated bend off the top of the CPU block from the radiator. Any ideas how I might route this to look better? I know my tube going back into the pump needs to be shortened a little bit as well. This is my first time attempting watercooling so be easy on me lol.

 

I wouldn't trust some of those fittings like that, being off from a right angle to such a degree has the potential of leaks occurring. 

 

Personally I would recommend to move the pump res unit lower into a more ideal location and to proper mount it solidly to then map out your tubing runs accordingly. Using angled adapters and extension fittings will help greatly to properly align and orient locations for tubing runs. 

Link to comment
Share on other sites

Link to post
Share on other sites

This build has given me ocd

AMD blackout rig

 

cpu: ryzen 5 3600 @4.4ghz @1.35v

gpu: rx5700xt 2200mhz

ram: vengeance lpx c15 3200mhz

mobo: gigabyte b550 auros pro 

psu: cooler master mwe 650w

case: masterbox mbx520

fans:Noctua industrial 3000rpm x6

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

27 minutes ago, Silentkiller123 said:

Updated to not trigger OCD ???

20200223_225310.jpg

Omg so much better ?

do you have a parts list?

AMD blackout rig

 

cpu: ryzen 5 3600 @4.4ghz @1.35v

gpu: rx5700xt 2200mhz

ram: vengeance lpx c15 3200mhz

mobo: gigabyte b550 auros pro 

psu: cooler master mwe 650w

case: masterbox mbx520

fans:Noctua industrial 3000rpm x6

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

6 minutes ago, scuff gang said:

Omg so much better ?

do you have a parts list?

Man the more I look at it in a picture I realised that last pipe was probably a drunken one ???.  7700k Z270Board Corsair 360rad up top. Super thick. Bought on accident. Thin thermaltake 360 up front RTX2080TI and corsair waterblock on the card

Link to comment
Share on other sites

Link to post
Share on other sites

11 hours ago, Silentkiller123 said:

Man the more I look at it in a picture I realised that last pipe was probably a drunken one ???.  7700k Z270Board Corsair 360rad up top. Super thick. Bought on accident. Thin thermaltake 360 up front RTX2080TI and corsair waterblock on the card

One doesnt call a rad 'thick' unless ur talking about a NexXxos Monsta :P

CPU: Intel i7 3930k w/OC & EK Supremacy EVO Block | Motherboard: Asus P9x79 Pro  | RAM: G.Skill 4x4 1866 CL9 | PSU: Seasonic Platinum 1000w Corsair RM 750w Gold (2021)|

VDU: Panasonic 42" Plasma | GPU: Gigabyte 1080ti Gaming OC & Barrow Block (RIP)...GTX 980ti | Sound: Asus Xonar D2X - Z5500 -FiiO X3K DAP/DAC - ATH-M50S | Case: Phantek Enthoo Primo White |

Storage: Samsung 850 Pro 1TB SSD + WD Blue 1TB SSD | Cooling: XSPC D5 Photon 270 Res & Pump | 2x XSPC AX240 White Rads | NexXxos Monsta 80x240 Rad P/P | NF-A12x25 fans |

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×