Posted April 23, 2019 what does this mean? I live in misery USA. my timezone is central daylight time which is either UTC -5 or -4 because the government hates everyone. into trains? here's the model railroad thread! Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 23, 2019 Post the results of smartctl -x /dev/sd(drive letter) Probalby time to get a new drive. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 23, 2019 Author Device Model: ST1000LM048-2E7172 Serial Number: safety blocked LU WWN Device Id: 5 000c50 0b9d2464c Firmware Version: SDM1 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Apr 23 20:02:19 2019 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 162) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 040 040 006 - 115905931 3 Spin_Up_Time PO---- 100 099 000 - 0 4 Start_Stop_Count -O--CK 099 099 020 - 1780 5 Reallocated_Sector_Ct PO--CK 094 094 036 - 1656 7 Seek_Error_Rate POSR-- 078 060 045 - 67191412 9 Power_On_Hours -O--CK 099 099 000 - 1333 (73 241 0) 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 099 099 020 - 1312 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 039 039 000 - 61 188 Command_Timeout -O--CK 100 095 000 - 244817330262 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 060 041 040 - 40 (Min/Max 28/42) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 75 192 Power-Off_Retract_Count -O--CK 100 100 000 - 66 193 Load_Cycle_Count -O--CK 094 094 000 - 12674 194 Temperature_Celsius -O---K 040 059 000 - 40 (0 14 0 0 0) 197 Current_Pending_Sector -O--C- 058 058 000 - 3496 198 Offline_Uncorrectable ----C- 058 058 000 - 3496 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 1255 (3 151 0) 241 Total_LBAs_Written ------ 100 253 000 - 2593115941 242 Total_LBAs_Read ------ 100 253 000 - 2162520938 254 Free_Fall_Sensor -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 24 Device vendor specific log 0xa2 GPL VS 8160 Device vendor specific log 0xa8 GPL,SL VS 136 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 8920 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 16 Device vendor specific log 0xc2 GPL,SL VS 240 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xc4 GPL,SL VS 24 Device vendor specific log 0xc9 GPL,SL VS 1 Device vendor specific log 0xca GPL,SL VS 16 Device vendor specific log 0xd3 GPL VS 1920 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 69 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 69 [8] log entry is empty Error 68 [7] log entry is empty Error 67 [6] log entry is empty Error 66 [5] log entry is empty Error 65 [4] log entry is empty Error 64 [3] occurred at disk power-on lifetime: 912 hours (38 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6c 2b f3 b0 00 00 Error: UNC at LBA = 0x6c2bf3b0 = 1814819760 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 6c 2b fc a8 40 00 00:00:53.404 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 2b fb 20 40 00 00:00:52.507 READ FPDMA QUEUED 60 00 00 01 88 00 00 6c 2b f7 48 40 00 00:00:52.505 READ FPDMA QUEUED 60 00 00 03 f0 00 00 6c 2b f3 40 40 00 00:00:52.505 READ FPDMA QUEUED 60 00 00 02 30 00 00 6c 2b f0 00 40 00 00:00:52.502 READ FPDMA QUEUED Error 63 [2] occurred at disk power-on lifetime: 912 hours (38 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6c 2c 1b 48 00 00 Error: UNC at LBA = 0x6c2c1b48 = 1814829896 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 6c 2c 2d b0 40 00 00:01:36.954 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 2c 2a 48 40 00 00:01:36.055 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 2c 25 80 40 00 00:01:36.055 READ FPDMA QUEUED 60 00 00 02 00 00 00 6c 2c 1b 48 40 00 00:01:36.055 READ FPDMA QUEUED 60 00 00 00 08 00 00 6c 14 00 18 40 00 00:01:36.055 READ FPDMA QUEUED Error 62 [1] occurred at disk power-on lifetime: 912 hours (38 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6c 2c 11 f0 00 00 Error: UNC at LBA = 0x6c2c11f0 = 1814827504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 6c 2c 15 08 40 00 00:01:33.108 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 2c 11 90 40 00 00:01:33.108 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 2c 13 e8 40 00 00:01:33.107 READ FPDMA QUEUED 60 00 00 01 88 00 00 6c 2b f7 48 40 00 00:01:33.107 READ FPDMA QUEUED 60 00 00 00 18 00 00 6c 4d 50 18 40 00 00:01:33.107 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed: read failure 90% 1329 71438944 # 2 Short offline Completed without error 00% 390 - # 3 Short offline Completed without error 00% 335 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 28/42 Celsius Lifetime Min/Max Temperature: 14/59 Celsius Lifetime Average Temperature: 40 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 30 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (75) Index Estimated Time Temperature Celsius 76 2019-04-21 04:30 50 ******************************* 77 2019-04-21 05:00 49 ****************************** 78 2019-04-21 05:30 49 ****************************** 79 2019-04-21 06:00 49 ****************************** 80 2019-04-21 06:30 47 **************************** 81 2019-04-21 07:00 46 *************************** 82 2019-04-21 07:30 47 **************************** 83 2019-04-21 08:00 43 ************************ 84 2019-04-21 08:30 44 ************************* 85 2019-04-21 09:00 43 ************************ 86 2019-04-21 09:30 45 ************************** 87 2019-04-21 10:00 42 *********************** 88 2019-04-21 10:30 ? - 89 2019-04-21 11:00 39 ******************** 90 2019-04-21 11:30 ? - 91 2019-04-21 12:00 46 *************************** 92 2019-04-21 12:30 45 ************************** 93 2019-04-21 13:00 44 ************************* ... ..( 5 skipped). .. ************************* 99 2019-04-21 16:00 44 ************************* 100 2019-04-21 16:30 50 ******************************* 101 2019-04-21 17:00 55 ************************************ 102 2019-04-21 17:30 56 ************************************* 103 2019-04-21 18:00 56 ************************************* 104 2019-04-21 18:30 49 ****************************** 105 2019-04-21 19:00 46 *************************** 106 2019-04-21 19:30 45 ************************** ... ..( 3 skipped). .. ************************** 110 2019-04-21 21:30 45 ************************** 111 2019-04-21 22:00 44 ************************* 112 2019-04-21 22:30 44 ************************* 113 2019-04-21 23:00 54 *********************************** 114 2019-04-21 23:30 55 ************************************ 115 2019-04-22 00:00 48 ***************************** 116 2019-04-22 00:30 45 ************************** 117 2019-04-22 01:00 44 ************************* 118 2019-04-22 01:30 44 ************************* 119 2019-04-22 02:00 47 **************************** 120 2019-04-22 02:30 54 *********************************** 121 2019-04-22 03:00 ? - 122 2019-04-22 03:30 56 ************************************* 123 2019-04-22 04:00 ? - 124 2019-04-22 04:30 54 *********************************** 125 2019-04-22 05:00 53 ********************************** 126 2019-04-22 05:30 ? - 127 2019-04-22 06:00 56 ************************************* 0 2019-04-22 06:30 ? - 1 2019-04-22 07:00 56 ************************************* 2 2019-04-22 07:30 ? - 3 2019-04-22 08:00 55 ************************************ 4 2019-04-22 08:30 58 *************************************** 5 2019-04-22 09:00 59 **************************************** 6 2019-04-22 09:30 55 ************************************ 7 2019-04-22 10:00 45 ************************** 8 2019-04-22 10:30 43 ************************ 9 2019-04-22 11:00 ? - 10 2019-04-22 11:30 43 ************************ 11 2019-04-22 12:00 53 ********************************** 12 2019-04-22 12:30 ? - 13 2019-04-22 13:00 54 *********************************** 14 2019-04-22 13:30 57 ************************************** 15 2019-04-22 14:00 ? - 16 2019-04-22 14:30 57 ************************************** 17 2019-04-22 15:00 ? - 18 2019-04-22 15:30 39 ******************** 19 2019-04-22 16:00 ? - 20 2019-04-22 16:30 45 ************************** 21 2019-04-22 17:00 45 ************************** 22 2019-04-22 17:30 50 ******************************* 23 2019-04-22 18:00 52 ********************************* 24 2019-04-22 18:30 53 ********************************** 25 2019-04-22 19:00 46 *************************** 26 2019-04-22 19:30 45 ************************** 27 2019-04-22 20:00 46 *************************** 28 2019-04-22 20:30 51 ******************************** 29 2019-04-22 21:00 41 ********************** 30 2019-04-22 21:30 39 ******************** 31 2019-04-22 22:00 38 ******************* ... ..( 3 skipped). .. ******************* 35 2019-04-23 00:00 38 ******************* 36 2019-04-23 00:30 37 ****************** 37 2019-04-23 01:00 38 ******************* 38 2019-04-23 01:30 37 ****************** ... ..( 9 skipped). .. ****************** 48 2019-04-23 06:30 37 ****************** 49 2019-04-23 07:00 ? - 50 2019-04-23 07:30 37 ****************** 51 2019-04-23 08:00 ? - 52 2019-04-23 08:30 37 ****************** 53 2019-04-23 09:00 ? - 54 2019-04-23 09:30 36 ***************** 55 2019-04-23 10:00 ? - 56 2019-04-23 10:30 42 *********************** 57 2019-04-23 11:00 ? - 58 2019-04-23 11:30 42 *********************** 59 2019-04-23 12:00 ? - 60 2019-04-23 12:30 42 *********************** 61 2019-04-23 13:00 ? - 62 2019-04-23 13:30 30 *********** 63 2019-04-23 14:00 ? - 64 2019-04-23 14:30 33 ************** 65 2019-04-23 15:00 ? - 66 2019-04-23 15:30 33 ************** 67 2019-04-23 16:00 ? - 68 2019-04-23 16:30 28 ********* 69 2019-04-23 17:00 39 ******************** 70 2019-04-23 17:30 41 ********************** 71 2019-04-23 18:00 42 *********************** ... ..( 3 skipped). .. *********************** 75 2019-04-23 20:00 42 *********************** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1312 --- Lifetime Power-On Resets 0x01 0x010 4 1333 --- Power-on Hours 0x01 0x018 6 2585727115 --- Logical Sectors Written 0x01 0x020 6 29040368 --- Number of Write Commands 0x01 0x028 6 2166453959 --- Logical Sectors Read 0x01 0x030 6 31034118 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 381 --- Spindle Motor Power-on Hours 0x03 0x010 4 246 --- Head Flying Hours 0x03 0x018 4 12674 --- Head Load Events 0x03 0x020 4 1656 --- Number of Reallocated Logical Sectors 0x03 0x028 4 11551 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 3496 --- Number of Realloc. Candidate Logical Sectors 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 13516 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 81 --- Resets Between Cmd Acceptance and Completion |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS I live in misery USA. my timezone is central daylight time which is either UTC -5 or -4 because the government hates everyone. into trains? here's the model railroad thread! Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 23, 2019 Author sorry do not know what is relevant and what is not. I live in misery USA. my timezone is central daylight time which is either UTC -5 or -4 because the government hates everyone. into trains? here's the model railroad thread! Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 23, 2019 Yea the drive has problems, get a new one, and restore backups. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 23, 2019 Author that drive is maybe one year old in a 2014 laptop! why did it die????????????? why not some thing old? also why am I dumb enough that even though I constantly have problems requireing new os I don't keep a backup??? I live in misery USA. my timezone is central daylight time which is either UTC -5 or -4 because the government hates everyone. into trains? here's the model railroad thread! Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 23, 2019 Just now, will1432 said: that drive is maybe one year old in a 2014 laptop! why did it die????????????? why not some thing old? also why am I dumb enough that even though I constantly have problems requireing new os I don't keep a backup??? Drives will die randomly. And that drive would be about 5 years old now, getting near the end of the practical lifespan If you don't care about the data, just reinstall on the new drive, backups keep the files safe. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 23, 2019 Author I meant I replaced the drive with A new one like a year ago I live in misery USA. my timezone is central daylight time which is either UTC -5 or -4 because the government hates everyone. into trains? here's the model railroad thread! Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 23, 2019 1 minute ago, will1432 said: I meant I replaced the drive with A new one like a year ago then get the drive swapped under warranty. And id replace it with a ssd, much faster, won't faile with drops and shakes, lower power. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 23, 2019 Author limited warranty only defects and workmanship. I live in misery USA. my timezone is central daylight time which is either UTC -5 or -4 because the government hates everyone. into trains? here's the model railroad thread! Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 23, 2019 Just now, will1432 said: limited warranty only defects and workmanship. if its only one year old, this should be covered under warranty as a defect. Just try to warranty it. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 23, 2019 Author I will get on that and just maybe never use seagate again I live in misery USA. my timezone is central daylight time which is either UTC -5 or -4 because the government hates everyone. into trains? here's the model railroad thread! Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 23, 2019 Just now, will1432 said: I will get on that and just maybe never use seagate again seagate is fine, these are random failures, nothing you can do about that. Just plain for the failures and make backups. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 24, 2019 it happens bro!!! some last a lifetime others don't make it 6 months.. i have had them last way more than i have had drive fail. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 24, 2019 Author and I had all the warning in the world! it slowed down it seamed to hate me all the normal flags! I live in misery USA. my timezone is central daylight time which is either UTC -5 or -4 because the government hates everyone. into trains? here's the model railroad thread! Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 24, 2019 Author and seagate provides me with no support because of linux?????????????? really????? I live in misery USA. my timezone is central daylight time which is either UTC -5 or -4 because the government hates everyone. into trains? here's the model railroad thread! Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 26, 2019 Author Ok update! seagates seatools fixed it. what was wrong with it for those who don't speak the ancient language of the terminal? I live in misery USA. my timezone is central daylight time which is either UTC -5 or -4 because the government hates everyone. into trains? here's the model railroad thread! Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
.png.255947720031a641abdac78e663b681c.png)
.thumb.jpg.e4dafad042de9d17285599f16e47b236.jpg)
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now