Posted January 9, 2019 Just built a new pc specs are: Motherboard: Asus z370-p prime Cpu: Intel i5 9600k CPU Cooler: corsair h75 Gpu: asus gtx 1060 dual oc Ram: corsair vengeance lpx ddr4 3000Mhz 16gbx2 Psu: powercool 750w After completing the build and attempting to power on there's no POST, so I've installed an internal speaker for testing purposes and now when trying to switch on there's one beep and no POST. Any help would be appreciated, thanks. I've provided photos on inside the case if that can help in any way. Please excuse the bad cable management - will fix later - main concern is getting it to work. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 9, 2019 A single beep usually means it's fine so maybe it's just a video output issue? Can you try using the IGPU? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 9, 2019 Make sure the clear CMOS jumper is not shorted. I'm gonna go find my own tech support... with BLACKJACK and HOOKERS! (Welcome to LTT Forums) Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 9, 2019 Author 11 minutes ago, Olaf6541 said: A single beep usually means it's fine so maybe it's just a video output issue? Can you try using the IGPU? No luck Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 9, 2019 @DrunkenBear you're supposed to remove the GPU before using the iGPU, but anyway one beep means that it posted, try a different monitor, some monitors don't support the weird resolution that the BIOS runs at. Quote or Tag people so they know that you've replied. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 9, 2019 Author Getting no signal detected on the monitor using igpu Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 9, 2019 Author 31 minutes ago, LukeTheCoder05 said: Make sure the clear CMOS jumper is not shorted. I'm having trouble finding the cmos jumper Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 9, 2019 It's possible that your motherboard doesn't support 9th gen, and may need either a BIOS update. 9th gen works best with Z390, not Z370. If my answer got you to your solution make sure to 'Mark Resolved! ( / . _ . / ) Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 9, 2019 On that motherboard, when you go to boot it up, there should be 4 lights. CPU/DRAM/VGA/BOOT. Does it get stuck on a particular light? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
.png.255947720031a641abdac78e663b681c.png)
.thumb.jpg.e4dafad042de9d17285599f16e47b236.jpg)
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now