New build, no post

[DrunkenBear]

Just built a new pc specs are: 

Motherboard: Asus z370-p prime

Cpu: Intel i5 9600k

CPU Cooler: corsair h75

Gpu: asus gtx 1060 dual oc 

Ram: corsair vengeance lpx ddr4 3000Mhz 16gbx2

Psu: powercool 750w 

 

After completing the build and attempting to power on there's no POST, so I've installed an internal speaker for testing purposes and now when trying to switch on there's one beep and no POST.

Any help would be appreciated, thanks.

 

I've provided photos on inside the case if that can help in any way. Please excuse the bad cable management - will fix later - main concern is getting it to work.

 

 

 

 

[Olaf6541]

A single beep usually means it's fine so maybe it's just a video output issue? Can you try using the IGPU?

[Bubbles_TPB]

Make sure the clear CMOS jumper is not shorted.

[DrunkenBear]

11 minutes ago, Olaf6541 said:

A single beep usually means it's fine so maybe it's just a video output issue? Can you try using the IGPU?

No luck

[.Apex.]

@DrunkenBear

you're supposed to remove the GPU before using the iGPU, but anyway one beep means that it posted, try a different monitor, some monitors don't support the weird resolution that the BIOS runs at.

[DrunkenBear]

Getting no signal detected on the monitor using igpu 

[DrunkenBear]

31 minutes ago, LukeTheCoder05 said:

Make sure the clear CMOS jumper is not shorted.

I'm having trouble finding the cmos jumper

[GabeThePCHelper]

It's possible that your motherboard doesn't support 9th gen, and may need either a BIOS update.

9th gen works best with Z390, not Z370.