Jump to content

Evga 750ti ftw overclocking

Nathan Carstens

I want to over clock my 750ti with msi after burner what is your recommendations thanks

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, Nathan Carstens said:

I want to over clock my 750ti with msi after burner what is your recommendations thanks

Well what do you need recommendations for?

 

Here's a short GPU overclocking for you:

- Increase the core clock by a bit at a time (maybe 25MHz at a time) and same goes for memory.

- Then you stress test your GPU (run Unigine Valley Benchmark) for some time.

- If the application doesn't crash, then your overclock is stable but if Unigine Valley Benchmark crashes, then your overclock isn't stable. 

- If your app crashes, you have two options: either add more voltage or decrease the core/memory clock.

CPU: Intel Core i7-950 Motherboard: Gigabyte GA-X58A-UD3R CPU Cooler: NZXT HAVIK 140 RAM: Corsair Dominator DDR3-1600 (1x2GB), Crucial DDR3-1600 (2x4GB), Crucial Ballistix Sport DDR3-1600 (1x4GB) GPU: ASUS GeForce GTX 770 DirectCU II 2GB SSD: Samsung 860 EVO 2.5" 1TB HDDs: WD Green 3.5" 1TB, WD Blue 3.5" 1TB PSU: Corsair AX860i & CableMod ModFlex Cables Case: Fractal Design Meshify C TG (White) Fans: 2x Dynamic X2 GP-12 Monitors: LG 24GL600F, Samsung S24D390 Keyboard: Logitech G710+ Mouse: Logitech G502 Proteus Spectrum Mouse Pad: Steelseries QcK Audio: Bose SoundSport In-Ear Headphones

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Geography said:

Well what do you need recommendations for?

 

Here's a short GPU overclocking for you:

- Increase the core clock by a bit at a time (maybe 25MHz at a time) and same goes for memory.

- Then you stress test your GPU (run Unigine Valley Benchmark) for some time.

- If the application doesn't crash, then your overclock is stable but if Unigine Valley Benchmark crashes, then your overclock isn't stable. 

- If your app crashes, you have two options: either add more voltage or decrease the core/memory clock.

OK thank you

Link to comment
Share on other sites

Link to post
Share on other sites

Every card has different overclocking abilities, even if it’s the exact same flavour of GPU. Follow what @Geography said.

Link to comment
Share on other sites

Link to post
Share on other sites

if the temps are good (below 70C when overclocked with stock power limit) you can even raise the power limit to the max (there's a 6pin PCIe connector on this card) and overclock further.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Jurrunio said:

if the temps are good (below 70C when overclocked with stock power limit) you can even raise the power limit to the max (there's a 6pin PCIe connector on this card) and overclock further.

 can I see the temperature on msi afterburner or do I need to get a different program thanks I'm a noob

Link to comment
Share on other sites

Link to post
Share on other sites

This should be a good overclocker, looking forward to the results. The 150w power capability over the standard 750ti and the dual fan design will allow for a serious performance increase.

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I needATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explainedgroup reg is bad

Link to comment
Share on other sites

Link to post
Share on other sites

14 minutes ago, Nathan Carstens said:

 can I see the temperature on msi afterburner or do I need to get a different program thanks I'm a noob

Afternurner should display temperature

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

3 hours ago, Nathan Carstens said:

Before vs after

 

 

Go into the afterburner settings and unlock voltage control so you can push core clocks higher, also you should be able to get much higher on the memory, does anything higher cause instability?

8086k Winner BABY!!

 

Main rig

CPU: R7 5800x3d (-25 all core CO 102 bclk)

Board: Gigabyte B550 AD UC

Cooler: Corsair H150i AIO

Ram: 32gb HP V10 RGB 3200 C14 (3733 C14) tuned subs

GPU: EVGA XC3 RTX 3080 (+120 core +950 mem 90% PL)

Case: Thermaltake H570 TG Snow Edition

PSU: Fractal ION Plus 760w Platinum  

SSD: 1tb Teamgroup MP34  2tb Mushkin Pilot-E

Monitors: 32" Samsung Odyssey G7 (1440p 240hz), Some FHD Acer 24" VA

 

GFs System

CPU: E5 1660v3 (4.3ghz 1.2v)

Mobo: Gigabyte x99 UD3P

Cooler: Corsair H100i AIO

Ram: 32gb Crucial Ballistix 3600 C16 (3000 C14)

GPU: EVGA RTX 2060 Super 

Case: Phanteks P400A Mesh

PSU: Seasonic Focus Plus Gold 650w

SSD: Kingston NV1 2tb

Monitors: 27" Viotek GFT27DB (1440p 144hz), Some 24" BENQ 1080p IPS

 

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

23 minutes ago, TheDankKoosh said:

Go into the afterburner settings and unlock voltage control so you can push core clocks higher, also you should be able to get much higher on the memory, does anything higher cause instability?

Anything higher it freezes my pc

Link to comment
Share on other sites

Link to post
Share on other sites

33 minutes ago, Nathan Carstens said:

Anything higher it freezes my pc

oof, that's some really bad memory if it can't do at least +250. I got +120 core +300 memory stable on a 750 ti sc and I believe it broke the record on userbenchmark.

8086k Winner BABY!!

 

Main rig

CPU: R7 5800x3d (-25 all core CO 102 bclk)

Board: Gigabyte B550 AD UC

Cooler: Corsair H150i AIO

Ram: 32gb HP V10 RGB 3200 C14 (3733 C14) tuned subs

GPU: EVGA XC3 RTX 3080 (+120 core +950 mem 90% PL)

Case: Thermaltake H570 TG Snow Edition

PSU: Fractal ION Plus 760w Platinum  

SSD: 1tb Teamgroup MP34  2tb Mushkin Pilot-E

Monitors: 32" Samsung Odyssey G7 (1440p 240hz), Some FHD Acer 24" VA

 

GFs System

CPU: E5 1660v3 (4.3ghz 1.2v)

Mobo: Gigabyte x99 UD3P

Cooler: Corsair H100i AIO

Ram: 32gb Crucial Ballistix 3600 C16 (3000 C14)

GPU: EVGA RTX 2060 Super 

Case: Phanteks P400A Mesh

PSU: Seasonic Focus Plus Gold 650w

SSD: Kingston NV1 2tb

Monitors: 27" Viotek GFT27DB (1440p 144hz), Some 24" BENQ 1080p IPS

 

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

On 1/7/2019 at 2:12 AM, Nathan Carstens said:

Anything higher it freezes my pc

memory can be touchy in my experience, but you can't get any higher than +74 on the core?

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I needATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explainedgroup reg is bad

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, fasauceome said:

memory can be touchy in my experience, but you can't get any higher than +74 on the core?

Yea it crashed the whole system

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×