Jump to content

Ryzen 5 1600 + Corsair H150i PRO RGB

i received a H150i PRO RGB and installed it in my Coolermaster Masterbox PRO RGB Case (front mount 360mm rad) and used the stock coolermaster PRESSURE optimized fans as the "PULL" on the rad and the Corsair ML120 fans as the Push ( coolermaster pulling air into the rad and corsair pushing air into the case from the RAD) and at idle i get about 45C on the CPU and while streamer at anywhere from 50% to 90% load for roughly 6 hours i hit max temps (MSI Afterburner) at roughly 75C

 

Im curios to know if this is normal for this rad or if my fan configuration is totally fucked. 

 

Also it should be noted that the CPU is OC from 3.2GHz to 3.9 on 4.0V (stock voltage) also my GPU tends to be +- 2C of my CPU at almost all times no matter the workload 

 

im streaming 720p60 at Fast Preset on x264 with 2 keyframe interval and 8000bitrate 

 

 

let me know if you have other questions  

Link to comment
Share on other sites

Link to post
Share on other sites

Yeah if your score was at 4v then your cpu would be fried. Also never use stock voltage when overclocking. You want to set a manual voltage otherwise auto voltage can put in dangerous voltages. 

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Brooksie359 said:

Yeah if your score was at 4v then your cpu would be fried. Also never use stock voltage when overclocking. You want to set a manual voltage otherwise auto voltage can put in dangerous voltages. 

let me double check right now and let you know 

 

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Connor_LindTV said:

let me double check right now and let you know 

 

 

1 minute ago, Brooksie359 said:

Yeah if your score was at 4v then your cpu would be fried. Also never use stock voltage when overclocking. You want to set a manual voltage otherwise auto voltage can put in dangerous voltages. 

im so sorry, brain must be fried, its 1.4V 

 

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, Connor_LindTV said:

 

im so sorry, brain must be fried, its 1.4V 

 

Yeah 1.4v is the max I would go.

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Brooksie359 said:

Yeah 1.4v is the max I would go.

im a bit more concerned about the temps, do they seem high? 

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, Connor_LindTV said:

im a bit more concerned about the temps, do they seem high? 

They aren't dangerous. 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×