Jump to content

One Pin Bent on CPU

I have an AMD Ryzen 5 3600, and when I removed it from its socket, I noticed that there was one pin bent. Will this cause the CPU to not work? Should I try to bend it back?

Link to comment
Share on other sites

Link to post
Share on other sites

IF you are lucky its a nonessential pin, if you are unlucky it's necessary for it towork. Try and boot using the CPU and see how it goes.

Link to comment
Share on other sites

Link to post
Share on other sites

If it's a GND pin it should be fine. If it's just about any other pin your computer probably won't POST without it.

 

How bent is it? If it's not terribly you can usually bend it back.

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Windows7ge said:

If it's a GND pin it should be fine. If it's just about any other pin your computer probably won't POST without it.

 

How bent is it? If it's not terribly you can usually bend it back.

pretty much sideways

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Windows7ge said:

If it's a GND pin it should be fine. If it's just about any other pin your computer probably won't POST without it.

 

How bent is it? If it's not terribly you can usually bend it back.

how can i tell if its a GND pin?

 

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, azurefiresmusic said:

how can i tell if its a GND pin?

 

test the cpu

if it was useful give it a like :) btw if your into linux pay a visit here

 

Link to comment
Share on other sites

Link to post
Share on other sites

if it's just a ground pin or a nonessential one then it's fine, you can try booting it up and check, if something is wrong try to straighten  it. 

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, azurefiresmusic said:

pretty much sideways

You can try bending it back careful. Worse case scenario you could try following the second half of this very old Linus video:

 

Link to comment
Share on other sites

Link to post
Share on other sites

If it's one of the pins around the golden triangle, you might be in luck. Otherwise, try your best to bend it back into shape without breaking it off. Good luck!

Link to comment
Share on other sites

Link to post
Share on other sites

A little trick I learned once for bending pins back into place while minimizing additional damage. Grab a mechanical pencil and remove the lead from it. Insert the bent pin into the end and straiten it.

 

It's a little more full proof than needles, thumb tacks, or pliers.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×