Jump to content

Overclocking issues

After finishing my first hardline custom loop I have had trouble hitting 5ghz without hitting 90+c(while running a stress test)on my cpu and Vrms. I have little experience with overclocking CPU’s and memory as with most of the pcs I’ve built I have left the bios almost untouched. I have tried messing with offset/tried to under-volt it but had no luck. I understand that the 9900k does run hot but not this hot, especially with a custom loop.
 

My rig

Cpu: i9 9900k

Motherboard: Msi z390 Godlike

Memory: Corsair dominator platinum 32gb 3600mhz

Gpu: Rtx 2080 ti kingpin/w hydrocopper 

6 Corsair ll120 fans and an ek pe 360 mm rad

 

(I apologize for the poor image quality)

475586DB-2D0D-4A72-A663-45BC86801780.jpeg

Link to comment
Share on other sites

Link to post
Share on other sites

That Rad may not be enough for a Gpu and Cpu. Get another one.

Link to comment
Share on other sites

Link to post
Share on other sites

is the pump working correctly?

Bethesda PC:   R7 3700X  -  Asrock B550 Extreme 4  -  Corsair Dominator Platinum RGB 16GB@3.6GHz -  Zotac AMP Extreme 1080TI -  Samsung 860 Evo 256GB  -  WD Blue 2TB SSD -  500DX  -  Stock cooling lul  -  Rm650x

CrumpleBox V3:  Xeon X5680  -  Asus X58 Sabertooth  -  DDr3 16GB@1.33Ghz  -  Gigabyte 1660s -  TT smart RGB 700W  -  

Cooler Master Storm Trooper  -  120GB Samsung 850 Pro   -  LTT Edition Chromax NH-D15 ?

 

CrumpleBox 3 ROTF: I5-6400  -  MSI B150m Mortar  -  16GB 2133Mhz Vengeance Pro RGB  -  Strix 1070Ti - GTX 1070 FE  -  Adata 128GB SSD  -  Fractal Design Define C  -  Gammaxx 400V2  -  Cooler Master silent pro gold 1000W

CrumpleBox 2: i7-7820x - MSI X299 Raider - 32GB Thermaltake Toughram 3.6Ghz - 2x Sapphire Nitro Fury - 128GB PCie Adata SSD - O11 Dynamic - EVGA CLC 360 - Corsair RM1000X

 

Perhiperals:  Gateway 900p60 monitor  -  Dell 1024x768@75  -  Logi. G403 Carbon  -  Logi. G502  -  SteSer. Arctis 5  -  SteSer. Rival 110 - Corsair Strafe RGB MK.2

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

6 minutes ago, ShrimpBrime said:

That Rad may not be enough for a Gpu and Cpu. Get another one.

Problem is with my current configuration I can’t fit two rads/ my gpu is just too large.

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, ZeratorRules said:

Problem is with my current configuration I can’t fit two rads/ my gpu is just too large.

Well it looks really nice! 

I had an issue many years ago. Ran out of room with my Antec 900 case. So I got my hands on a SilverStone Tj07. Never had a problem with space since. Didn't look as nice as your case though.

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, ShrimpBrime said:

Well it looks really nice! 

I had an issue many years ago. Ran out of room with my Antec 900 case. So I got my hands on a SilverStone Tj07. Never had a problem with space since. Didn't look as nice as your case though.

 

Do you have any other large case recommendations preferably with ample liquid cooling support/only because I had enough trouble putting this thing together as it is. The distribution block made it so much easier to route tubing

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, ZeratorRules said:
11 minutes ago, ShrimpBrime said:

 

Do you have any other large case recommendations preferably with ample liquid cooling support/only because I had enough trouble putting this thing together as it is. The distribution block made it so much easier to route tubing

Fractal Design Define R6 Black TG is a nice case. 

Maybe Phanteks, they make some really nice cases.

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×