Switched from nvidia to amd.. pc wont boot please help!

[Pomfrit]

I deleted old nvidia drivers and took out the old gpu and installed the new amd gpu rx 570. Now my pc wont boot it shows intel as always and then a black screen shows with number 0 at buttom... i dont know why it does not work im frustrated already took it out and put it back in... and the pc works normally when i install my old nvidia gpu back... but with this one it doesnt seem to work please help... also i checked all the cables, ram... everything seems fine... also i tried to boot the pc with the original drivers cd and it still doesnt work

[Pomfrit]

Just now, Pomfrit said:

I deleted old nvidia drivers and took out the old gpu and installed the new amd gpu rx 570. Now my pc wont boot it shows intel as always and then a black screen shows with number 0 at buttom... i dont know why it does not work im frustrated already took it out and put it back in... and the pc works normally when i install my old nvidia gpu back... but with this one it doesnt seem to work please help... also i checked all the cables, ram... everything seems fine... also i tried to boot the pc with the original drivers cd and it still doesnt work, bios is set to default.

 

[5x5]

Did you use DDU? If not, you haven't deleted any driver, you've just made a software mess. Also, is the card used? If it is, are you sure it's not dead and you didn't get defrauded?

[Pomfrit]

7 minutes ago, 5x5 said:

Did you use DDU? If not, you haven't deleted any driver, you've just made a software mess. Also, is the card used? If it is, are you sure it's not dead and you didn't get defrauded?

I did not use ddu.. yes the card works.. rgbs work and the fans too..

[Deuxez]

plug in the previous nvidia card instead of the rx570. If it boots download and use DDU. After that try to install the rx 570 into the system.

[Crunchy Dragon]

15 minutes ago, Pomfrit said:

I did not use ddu

Boot into Safe Mode and run DDU. After that, your new card should work.

[Pomfrit]

12 minutes ago, Crunchy Dragon said:

Boot into Safe Mode and run DDU. After that, your new card should work.

Thank you will try

[Pomfrit]

17 minutes ago, DankDeuxez said:

plug in the previous nvidia card instead of the rx570. If it boots download and use DDU. After that try to install the rx 570 into the system.

Thank you will try

[Pomfrit]

19 minutes ago, Crunchy Dragon said:

Boot into Safe Mode and run DDU. After that, your new card should work.

Still same old

[Pomfrit]

25 minutes ago, DankDeuxez said:

plug in the previous nvidia card instead of the rx570. If it boots download and use DDU. After that try to install the rx 570 into the system.

Still does not work

[Pomfrit]

Can anyone help me please 

[Pomfrit]

24 minutes ago, Pomfrit said:

Still same old

Doesnt work

[ChaoticChaosx]

Have you tried different ports in the gpu?

Another displayport, HDMI?

[Pomfrit]

6 minutes ago, ChaosCGTV said:

Have you tried different ports in the gpu?

Another displayport, HDMI?

Atm i only have hdmi >< will try that too when i can thanks

[Pomfrit]

Looks like imma have to take it to the computer guys

[ChaoticChaosx]

1 minute ago, Pomfrit said:

Looks like imma have to take it to the computer guys

Your monitor turns on right?

It doesn't say "no signal" after?

[Pomfrit]

9 minutes ago, ChaosCGTV said:

Your monitor turns on right?

It doesn't say "no signal" after?

Yes monitor turns on

[ChaoticChaosx]

2 minutes ago, Pomfrit said:

Yes monitor turns on

Okay in the motherboard manual do you know what the "0" means?

[Pomfrit]

Just now, ChaosCGTV said:

Okay in the motherboard manual do you know what the "0" means?

 I uploaded a video it looks like this... no i dont know what 0 means man

[Linus Sebastrian]

1 hour ago, Pomfrit said:

I deleted old nvidia drivers and took out the old gpu and installed the new amd gpu rx 570. Now my pc wont boot it shows intel as always and then a black screen shows with number 0 at buttom... i dont know why it does not work im frustrated already took it out and put it back in... and the pc works normally when i install my old nvidia gpu back... but with this one it doesnt seem to work please help... also i checked all the cables, ram... everything seems fine... also i tried to boot the pc with the original drivers cd and it still doesnt work

try connecting the monitor to the motherboard output (if it has one) 

try a different cable

 

[Pomfrit]

4 minutes ago, Linus Sebastrian said:

try connecting the monitor to the motherboard output (if it has one) 

try a different cable

 

I dont think it had one atleast indont see it >< but what would accomplish with doing that? Rx 570 still wouldnt work  already took out the amd card and plugged back in the old nvidia card to use ddu and i deleted all drivers and then i plugged back in the amd card and it still shows this black screen.... should i use dvid cable ? Cuz atm im using hdmi

[Pomfrit]

8 minutes ago, ChaosCGTV said:

Okay in the motherboard manual do you know what the "0" means?

How do i find out what the 0 means ?

[Gaires]

1 minute ago, Pomfrit said:

I dont think it had one atleast indont see it >< but what would accomplish with doing that? Rx 570 still wouldnt work  already took out the amd card and plugged back in the old nvidia card to use ddu and i deleted all drivers and then i plugged back in the amd card and it still shows this black screen.... should i use dvid cable ? Cuz atm im using hdmi

Since the old card works with the same hdmi cable, the cable itself is fine.

If you bought the rx 570 new I would suggest you return it.

[Pomfrit]

Just now, Gaires said:

Since the old card works with the same hdmi cable, the cable itself is fine.

If you bought the rx 570 new I would suggest you return it.

The card it used

[ChaoticChaosx]

3 minutes ago, Pomfrit said:

How do i find out what the 0 means ?

Usually in manuel.

Have you tried clearing CMOS and removing ram battery and putting it back in?

Any other cable us the DVI.

 

How used? Did they show it works?