Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Kregsta81

RYZEN 2700x overclock

Recommended Posts

Posted · Original PosterOP

What is the cheapest air and liquid cooler out there that will allow me to overclock this CPU with ease.

 

Thx in advance

Link to post
Share on other sites

Air: Scythe Mugen 5, Fuma 2, Ninja 5, Deepcool Neptwin, Thermalright 140mm fan large heatsink stuff

 

Liquid: EVGA CLC240, CM ML240R


"What's under the heatsink?" ep1, "Why it's not as good as it seem?" AMD fanboy edition out, episode 2 "Why my gaming board is a scam?" Intel fanboy edition coming soon (this is a link)

Hardware specs below

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.4?V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted · Original PosterOP
34 minutes ago, Jurrunio said:

Air: Scythe Mugen 5, Fuma 2, Ninja 5, Deepcool Neptwin, Thermalright 140mm fan large heatsink stuff

 

Liquid: EVGA CLC240, CM ML240R

Thx

Link to post
Share on other sites

What OC do you expect with the 2700X?  


Emma : i7 8700K @5.0Ghz - Gigabyte AORUS Z370 Gaming 5 - Thermaltake Water 3.0 Ultimate - G. Skill Ripjaws V 32GB 3200Mhz - Gigabyte AORUS 1080Ti - 750 EVO 512GB + 2x 860 EVO 1TB M.2 (RAID 0) - EVGA Supernova 650 P2 - Fractal Design Define R6 - AOC AGON 35" 3440x1440 100Hz - Mackie CR5BT - Logitech G910, G502, G933 - Cooler Master Universal Graphics Card Holder

 

Plex : Ryzen 5 1600 (stock) - Gigabyte B450M-DS3H - G. Skill Ripjaws V 8GB 2400Mhz - GeForce 8800GTS 640MB - 840 EVO 256GB + Toshiba P300 3TB - TP-Link AC1900 PCIe Wifi - Cooler Master MasterWatt Lite 500 - Antec Nine Hundred - Dell 19" 4:3

 

Lenovo 720S Touch 15.6" - i7 7700HQ, 16GB RAM, 512GB NVMe SSD, 1050Ti, 4K touchscreen

 

MSI GF62 - i7 7700HQ, 16GB 2400 MHz RAM, 256GB NVMe SSD + 1TB 7200rpm HDD, 1050Ti

Link to post
Share on other sites

My Corsair H100i GTX 240mm AIO couldn't handle my R7 1700 OC in sig at all under heavy load.   Built a custom loop, now I run mid 50's while gaming, and at full heat soak in the loop I hit 68c this weekend (run after run after run of CineR20).  Just info sharing.  I would expect a heavy OC to take a 360mm radiator at minimum (I use 600mm rad space) in push pull with some TG Kryo to have comfortable temps.


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, Custom Loop 2x240mm + 1x120mm radiator, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman ZM-GM1 mouse, Hannspree HF207 and Acer AL2016W monitors

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, 2x Gigabyte HD 7850 2gb GPUs in crossfire, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, PCCOOLING 160w TDP air cooler, 60gb Patriot SSD Win 10 boot drive, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  Logitech Wireless Keyboard and Mouse, Roku 55" 4k TV

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 2gb ram tinker toy at the moment.  Running Manjaro at the moment

APU Laptop: I need to clean this things TIM up so it can boot into Windows 7 for more than 5 minute before overheating at idle, it has things, I just haven't been on it in 2 years or so

Link to post
Share on other sites
Posted · Original PosterOP
9 minutes ago, Tristerin said:

My Corsair H100i GTX 240mm AIO couldn't handle my R7 1700 OC in sig at all under heavy load.   Built a custom loop, now I run mid 50's while gaming, and at full heat soak in the loop I hit 68c this weekend (run after run after run of CineR20).  Just info sharing.  I would expect a heavy OC to take a 360mm radiator at minimum (I use 600mm rad space) in push pull with some TG Kryo to have comfortable temps.

So a Corsair H11i pro with a 280mm rad wouldn't do the trick? I'm not an experienced builder and I've never built a custom waterloop. 

Link to post
Share on other sites
1 minute ago, Kregsta81 said:

So a Corsair H11i pro with a 280mm rad wouldn't do the trick? I'm not an experienced builder and I've never built a custom waterloop. 

Depends on your ambient temp but tbh heat soak will happen eventually if you put the system under heavy load for long enough.  

 

I can only give you my use case - I have 2 1700's.  To OC my RR2 in sig past 3.8ghz without heat soaking my 240mm AIO until it would crash from temps I had to build a custom loop.  I would assume that the 40mm extra of radiator real estate just wouldn't be enough either.  I have a 600mm (2x240 and 1x120mm radiators) loop and I easily contain the temps now with some room for hotter chips under that loop in the future.  

 

Ive worked on OCing RR1 in my sig (my other 1700) and I can get a 3.8ghz all core under medium load with just a 120mm AIO.  But I cannot go higher or it will crash due to temps.  I have an identical 600mm loop sitting in a box just waiting to slap on that system as well to push the 4.0-4.2ghz OC on that chip.

 

From my experience for a heavy 8 core OC on Ryzen you will want 360mm radiator space at minimum.

 

I believe @nick name has a OCd 2700x - do you have any input sir?


Ryzen Rig 2: ASrock B450 Pro4 ATX, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3600mhz V-Color Skywalker (or 4x8gb DDR4 2666mhz for large tasks), Corsair HX850 PSU, Custom Loop 2x240mm + 1x120mm radiator, 128gb Patriot Scorch NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, CoolerMaster HAF XM Case.  DSI 90-Key Mechanical Keyboard w/ Cherry Red switches, Zalman ZM-GM1 mouse, Hannspree HF207 and Acer AL2016W monitors

https://www.3dmark.com/3dm/37004594?

Ryzen Rig 1: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire R9 Fury Tri-X Nitro 4gb HBM, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case.  Zalman K600S keyboard, Zalman ZM-GM1 mouse, Acer XF270HU 2560x1440 144hz IPS monitor

https://www.3dmark.com/3dm/37628874?

Dwight: The Mixed Metals Loop Media Center.  Ask me about it.  Currently decommissioned to move to an mATX setup on a new MOBO once I pick one out

Schrute: ASUS M5A99FX Pro R2.0, FX 8350, 2x Gigabyte HD 7850 2gb GPUs in crossfire, 16gb (4x4) Corsair Vengeance DDR3 1600mhz, Sparkle/FSP 650w PSU, PCCOOLING 160w TDP air cooler, 60gb Patriot SSD Win 10 boot drive, 1tb WDBlack HDD, Rosewill Nautilus 1.0 case.  Logitech Wireless Keyboard and Mouse, Roku 55" 4k TV

Micro Form Factor Dell OptiPlex 3040: Dell 0MGK50 A02, i3-6100T, 4gb DDR3 1600, Team Group 120gb SSD, Windows 10 Pro, Logitech K400+, M.2 Intel Wifi/Bluetooth

Linux Box: Toshiba Laptop, i7 620M, NVS graphics, 2gb ram tinker toy at the moment.  Running Manjaro at the moment

APU Laptop: I need to clean this things TIM up so it can boot into Windows 7 for more than 5 minute before overheating at idle, it has things, I just haven't been on it in 2 years or so

Link to post
Share on other sites

Running 4.125ghz at 1.35volts with a CoolerMaster ML240L bought for 75$ CAD, less then 30C idle, around 45C while gaming, 65C under stress. Only complain is the loud fans that will have to be changed in the futur. I run 4.25ghz at 1.42 volts sometimes and temps are within safe zone.

Link to post
Share on other sites

I'm running a pair of 360 rads (30mm and 40mm), with noctua industrial fans, in a custom loop, in a define R6.

My 2700x running 4.35Ghz single core / 4.2Ghz all core, at 1.35v, will still hit low 70's C during prime 95 small FFT's, High 60's running multiple CB15 & 20 runs or when running handbrake. that's with an ambient of 24c.

 

 

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×