Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Wisehollows

Monitor No Signal

What cable you use? Maybe try hdmi as that should be the legacy port on the card

Recommended Posts

Posted · Original PosterOP

G'day all,

 

I need a little help with installing my new GPU. My original config was a 6600K and R9 390X and now I'm upgrading to a Vega 56. When I installed the New Graphic card I couldn't get signal from the GPU or the on board motherboard. The GPU seems to work as the lights are on and fans are spinning. I have now taken the GPU out and now running on the Motherboard output.

 

Cheers!

Link to post
Share on other sites
Posted · Original PosterOP

Full Specs of my PC are:

 

CPU: Core i-5 6600K

Motherboard: Gigabyte Z170 HD3?

GPU Original: Sapphire Tri X R9 390x

New GPU: MSI Air Boost Vega 56

Ram: 2x8gb Kingston Value Ram

PSU: Corsair RM850i 

SSD: San Disk 480Gb

Hard Drive: Seagate 4TB 

 

This is Running on Windows 8.1 64bit

Link to post
Share on other sites
Posted · Original PosterOP
11 minutes ago, TrigrH said:

enable  igpu multi monitor enabled and set the default display out to IGPU, see if you can atleast get an output from the IGPU while the card is installed.

I'm not quite sure how to do this on my BIO from what i've seen their isn't an option to do so. 

I don't know my exact bios but it says

BIOS version F5

BIOS Date: 10/13/2015

BIOS ID 8A09AG03

 

Link to post
Share on other sites
19 minutes ago, Wisehollows said:

I'm not quite sure how to do this on my BIO from what i've seen their isn't an option to do so. 

I don't know my exact bios but it says

BIOS version F5

BIOS Date: 10/13/2015

BIOS ID 8A09AG03

 

I would update to F22f and see if that fixed anything first:

https://www.gigabyte.com/au/Motherboard/GA-Z170-HD3-rev-10/support#support-dl-bios

Link to post
Share on other sites
Posted · Best Answer

What cable you use? Maybe try hdmi as that should be the legacy port on the card


CPU: Intel i7 9700K@5.2GHz 1.361V | Motherboard: Asus Maximus XI Hero | RAM: G.Skill 2x8 3200 CL14 (B-Die) | PSU: EVGA SuperNova 750 G3 | 

Mon: Samsung 27CHG70 27" 144Hz Freesync GPU: EVGA 1080ti SC Black Edition | Sound: Odac + Fiio E09K | 

Case: Fractal Design R6 TG Blackout | Storage: Corsair MP510 960gb Cooling: CPU: Kraken X62 - GPU: Kraken X42 - both with Noctua NF-A14's |

Ryzen rig for LAN/Backup

Link to post
Share on other sites
Posted · Original PosterOP
3 minutes ago, DoctorNick said:

What cable you use? Maybe try hdmi as that should be the legacy port on the card

I think the crummy DP cable I had was the issue after the BIOS update

Link to post
Share on other sites
Posted · Original PosterOP

Thanks DoctorNick and TrigrH for all the help! My PC is now working but turns out AMD doesn't support Windows 8.1 so gonna have to update.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×