Need FEEDBACK for my upcoming computer case

[chitoZ]

hello im christian dumdum i studied entrepreneurship here in the Philippines. im starting my own business soon its a computer case . currently im thinking about creating a compact microATX case since there are many manyyyy compact pc case for miniATX users.  i was hoping if you have suggestions for my scratch design  .

 

im having trouble with 

two video card support but bigger case ( a bit expensive to create ) 

 

or

 

one video card with smaller case. ( cheaper to create ) 

 

 

(note: im not a graphic designer or what im just a modder or pc builder who wants something different and want to create a business with it but will do better soon if its finalized  ) 

update: updated layout 

 

[jiyeon]

I highly recommend picking up a 3D CAD software to better visualise how your case is going to look, or at the least, create isometric views of this case. It's hard at least to me on a 2D paper workplane to see what you're going for here.

 

Also, use blank paper.

[Oshino Shinobu]

1 minute ago, seoz said:

Also, use blank paper.

And a ruler. 

[chitoZ]

6 minutes ago, Oshino Shinobu said:

And a ruler. 

 

8 minutes ago, seoz said:

I highly recommend picking up a 3D CAD software to better visualise how your case is going to look, or at the least, create isometric views of this case. It's hard at least to me on a 2D paper workplane to see what you're going for here.

 

Also, use blank paper.

hmmm i would want to but im so busy but anyways will do it soon maybe next week. 

[SimplyChunk]

1 hour ago, Oshino Shinobu said:

And a ruler. 

ALL HAIL THE GREAT RULER!!

[TVwazhere]

6 hours ago, chitoZ said:

im having trouble with 

two video card support but bigger case ( a bit expensive to create ) 

 

or

 

one video card with smaller case. ( cheaper to create ) 

One card with smaller case

 

Reasons not to do Dual GPU mATX

A, not many people do dual GPU configurations anymore (It's less than .1%) and B, if they do use dual GPU configs, they're almost ALWAYS in ATX and up motherboard sizes, since most "standard layouts" put the PSU under the GPU's, or the motherboards put the GPU's directly next to each other, choking the top card of air.  

Spoiler

 

[chitoZ]

as you guys requested a better version of it.  the dimensions maybe will be (HxWxD) 280 x 200 x 420-430mm  this will be the smaller case but i was thinking that its kinda useless for me to create it since a corsair 240 has a total demension of 956mm~ and mine has a total of  900mm

 

also if ill do the dual gpu support i could make the case bigger but supports ATX motherboard already so maybe the dimensions maybe will be 342 x 200 x 420-430mm a total of 962mm 

 

to compare a corsair 400c a compact atx case has a total dimension of 1103mm~ 

 

[chitoZ]

On 9/15/2018 at 1:32 AM, TVwazhere said:

One card with smaller case

 

Reasons not to do Dual GPU mATX

A, not many people do dual GPU configurations anymore (It's less than .1%) and B, if they do use dual GPU configs, they're almost ALWAYS in ATX and up motherboard sizes, since most "standard layouts" put the PSU under the GPU's, or the motherboards put the GPU's directly next to each other, choking the top card of air.  

  Reveal hidden contents

 

thankyou for the feedback ! i updated my layout 

[chitoZ]

here is the Atx version . my goal here is to give the people who wants a comptact atx case  

reasons why i choose this kind of layout 

1: mostly people only use 1 videocard 

2: people want comptact case but dont want to go mini or micro atx mobo because some features are not there like 4slot ram, looks and etc. 

3: mostly people are using ATX and dont want to buy another mobo just for to go compact.

4: (still thinking of it) 

 

We will be using 1.5mm or 2mm alumminum sheet for the case  

[chitoZ]

really need feedback from you guys if ill go with compact ATX or Matx 

[TVwazhere]

9 hours ago, chitoZ said:

really need feedback from you guys if ill go with compact ATX or Matx 

Build doesnt look like it has good cable management options (spacing behind the motherboard tray)

 

Even if they dont want to use extra GPU's, they might want to use a Wifi card, or a sound card, or some other PCI-E card there, which the PSU in its current position would block. (I've built 3 pc's within the last year or so that use wifi cards along side GPU's)

 

Also you dont add the L W H, you multiply them, so your volume is 29,181.6cm^3, which is a very similar size to this case:

https://www.riotoro.com/products/cr1080-small-gaming-case-with-compartment-design-full-atx-support/

 

Which this of course has its own limitations, being that the cooler height and GPU height are much lower than most cases.

[chitoZ]

19 hours ago, TVwazhere said:

Build doesnt look like it has good cable management options (spacing behind the motherboard tray)

 

Even if they dont want to use extra GPU's, they might want to use a Wifi card, or a sound card, or some other PCI-E card there, which the PSU in its current position would block. (I've built 3 pc's within the last year or so that use wifi cards along side GPU's)

 

Also you dont add the L W H, you multiply them, so your volume is 29,181.6cm^3, which is a very similar size to this case:

https://www.riotoro.com/products/cr1080-small-gaming-case-with-compartment-design-full-atx-support/

 

Which this of course has its own limitations, being that the cooler height and GPU height are much lower than most cases.

well my cable management will be something like a nzxt h400i  . well do you have suggestions what kind of case is needed for now ? still deciding if ill go with a compact  mini atx , micro or atx case 

[TVwazhere]

8 hours ago, chitoZ said:

well my cable management will be something like a nzxt h400i  . well do you have suggestions what kind of case is needed for now ? still deciding if ill go with a compact  mini atx , micro or atx case 

http://www.sliger.com/products/cases/cerberus/

 

Mount your PSU like this

[chitoZ]

hello wanted to ask. what do you call the person who creates 3d structures or 3d design for a computer case . wanted to hire someone so that the my manufacturer can manufacture the case quickly and more easier 

 

[TVwazhere]

1 hour ago, chitoZ said:

hello wanted to ask. what do you call the person who creates 3d structures or 3d design for a computer case . wanted to hire someone so that the my manufacturer can manufacture the case quickly and more easier 

They would be known as a CAD Designer, or CAD Technician

[chitoZ]

Hello this are my updates of the configures that you can do with the case. My product are aimed for Pc lovers that who likes small cases but want less hassle or problems 

[chitoZ]

If you have suggestions pls let me know

[chitoZ]

this is my updates of the layout of my design. the corner radius of the design is 6mm i think and maybe i should do 10mm . If you have suggestions of the design pls comment down bellow   any help that i will get will be much appreciated