Jump to content

Ryzen 5 1600 3.8Ghz at stock voltage

Hi guys, i recently got a GTX 1080 to pair with my Ryzen 5 1600, so i decided to OC it a bit with its stock cooler. I got it to 3.8 Ghz on all cores, ran AIDA64 for some hours and it did not crash. I did not change the stock voltage and it hits 1.25 V max at a max temp of 73C. Now i am wondering if i hit the silicon lottery or something, because from what i have seen 3.8 Ghz on stock voltage is pretty rare. Maybe i need to test stability for longer? Maybe my slow 2133 RAM helps in this case? Looking forward to hear your thoughts on the matter.

Link to comment
Share on other sites

Link to post
Share on other sites

16 minutes ago, Wyndmere said:

from what i have seen 3.8 Ghz on stock voltage is pretty rare.

Because only those with CPUs that overclock like garbage stay at 3.8GHz, those with good chips all go to 4GHz to 4.1GHz.

 

Try Prime95's small FFT test for 15mins. That should shoot the temperature and stability in the foot.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

15 minutes ago, KarathKasun said:

Smash it with OCCT using small FFT's, see if it errors out in ~30m or so.

 

6 minutes ago, Jurrunio said:

Because only those with CPUs that overclock like garbage stay at 3.8GHz, those with good chips all go to 4GHz to 4.1GHz.

 

Try Prime95's small FFT test for 15mins. That should shoot the temperature and stability in the foot.

Ok i'll try those, i do gaming and multitasking so i might not need the most stable system ever. I will try to OC higher but after i get an aftermarket cooler

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, Wyndmere said:

 

Ok i'll try those, i do gaming and multitasking so i might not need the most stable system ever. I will try to OC higher but after i get an aftermarket cooler

You will change your clocks after the 3rd time you randomly get a reboot during an online match or lose progress in that SP campaign you were working on.

 

I thought the same thing way back when I was overclocking my shiny new Pentium 4 3.06ghz.  I lost days of my life over the year that I ran the system "mostly stable"

Link to comment
Share on other sites

Link to post
Share on other sites

My Ryzen 5 1600 does 3.8Ghz on auto voltage. Not sure if that's different from stock, but first-gen Ryzen doesn't overclock particularly well from what I've been able to find.

 

Silicon lottery obviously plays a huge part in that, but it seems the line as a whole had issues.

Also running the stock cooler.

 

Worth noting that I'm completely unstable past 3.8Ghz unless I really up the voltage, which I don't feel comfortable doing(have to dip into 1.4v).

Quote or tag me( @Crunchy Dragon) if you want me to see your reply

If a post solved your problem/answered your question, please consider marking it as "solved"

Community Standards // Join Floatplane!

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×