Jump to content

Motherboard DVI port wasn't working so I did this...

Keelan
 Share
Go to solution Solved by Princess Luna,
1 minute ago, Keelan said:

.

Well as long as the Display 2 is your main display while the Display 1 is the side monitor every thing is working as it should and you don't have to worry about performance hits on your main monitor (display 2) at all.

Posted

So TLDR:

I could not get my second monitor to work as my motherboard wasn't detecting the DVI cable. I went into my bios settings and changed the display to IGPU.

Turns out both monitors work now but I'm unsure if this will effect performance due to integrated graphics being enabled.

What do you think?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I'm not sure if my GPU will bypass the whole using the integrated graphics or if it will come into play some how.

Thanks 

-Keelan

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Well see here is the problem. The pc can now decide what it's going to use and you don't have total control over that. I would just open task manager (if on win 10) or msi afterburner and launch a game and test on both screens to see which gpu gets activated.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Where were you plugging the DVI? Do you have a GPU? Which one? What operating system?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Usually the BIOS is set to disable the iGPU if you have a dedicated GPU, however enabling it does not mean your dedicated GPU won't work, you can simply go to dxdiag.exe and see for yourself the working video settings it probably will show your two displays and how one is running off the card while the other from the iGPU.

 

All you did was force iGPU enable along side the dedicated GPU as far as I am concerned here.

Personal Desktop":

CPU: Intel Core i7 10700K @5ghz |~| Cooling: bq! Dark Rock Pro 4 |~| MOBO: Gigabyte Z490UD ATX|~| RAM: 16gb DDR4 3333mhzCL16 G.Skill Trident Z |~| GPU: RX 6900XT Sapphire Nitro+ |~| PSU: Corsair TX650M 80Plus Gold |~| Boot:  SSD WD Green M.2 2280 240GB |~| Storage: 1x3TB HDD 7200rpm Seagate Barracuda + SanDisk Ultra 3D 1TB |~| Case: Fractal Design Meshify C Mini |~| Display: Toshiba UL7A 4K/60hz |~| OS: Windows 10 Pro.

Luna, the temporary Desktop:

CPU: AMD R9 7950XT  |~| Cooling: bq! Dark Rock 4 Pro |~| MOBO: Gigabyte Aorus Master |~| RAM: 32G Kingston HyperX |~| GPU: AMD Radeon RX 7900XTX (Reference) |~| PSU: Corsair HX1000 80+ Platinum |~| Windows Boot Drive: 2x 512GB (1TB total) Plextor SATA SSD (RAID0 volume) |~| Linux Boot Drive: 500GB Kingston A2000 |~| Storage: 4TB WD Black HDD |~| Case: Cooler Master Silencio S600 |~| Display 1 (leftmost): Eizo (unknown model) 1920x1080 IPS @ 60Hz|~| Display 2 (center): BenQ ZOWIE XL2540 1920x1080 TN @ 240Hz |~| Display 3 (rightmost): Wacom Cintiq Pro 24 3840x2160 IPS @ 60Hz 10-bit |~| OS: Windows 10 Pro (games / art) + Linux (distro: NixOS; programming and daily driver)
Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Ok so I have 2 potential places to plug in my DVI. I plug my main monitor into my GPU and my second monitor into my motherboard.

OS = Windows 10

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Princess Cadence said:

Usually the BIOS is set to disable the iGPU if you have a dedicated GPU, however enabling it does not mean your dedicated GPU won't work, you can simply go to dxdiag.exe and see for yourself the working video settings it probably will show your two displays and how one is running off the card while the other from the iGPU.

 

All you did was force iGPU enable along side the dedicated GPU as far as I am concerned here.

My gpu is displayed in the display 2, whereas my Integrated shows as display 1. Will that cause any problems with performance? 

76fe297f9dc4a19b40885e61feef434e.png

b0bfb1603f2cd672862d9dab831b3edd.png

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Solution
1 minute ago, Keelan said:

.

Well as long as the Display 2 is your main display while the Display 1 is the side monitor every thing is working as it should and you don't have to worry about performance hits on your main monitor (display 2) at all.

Personal Desktop":

CPU: Intel Core i7 10700K @5ghz |~| Cooling: bq! Dark Rock Pro 4 |~| MOBO: Gigabyte Z490UD ATX|~| RAM: 16gb DDR4 3333mhzCL16 G.Skill Trident Z |~| GPU: RX 6900XT Sapphire Nitro+ |~| PSU: Corsair TX650M 80Plus Gold |~| Boot:  SSD WD Green M.2 2280 240GB |~| Storage: 1x3TB HDD 7200rpm Seagate Barracuda + SanDisk Ultra 3D 1TB |~| Case: Fractal Design Meshify C Mini |~| Display: Toshiba UL7A 4K/60hz |~| OS: Windows 10 Pro.

Luna, the temporary Desktop:

CPU: AMD R9 7950XT  |~| Cooling: bq! Dark Rock 4 Pro |~| MOBO: Gigabyte Aorus Master |~| RAM: 32G Kingston HyperX |~| GPU: AMD Radeon RX 7900XTX (Reference) |~| PSU: Corsair HX1000 80+ Platinum |~| Windows Boot Drive: 2x 512GB (1TB total) Plextor SATA SSD (RAID0 volume) |~| Linux Boot Drive: 500GB Kingston A2000 |~| Storage: 4TB WD Black HDD |~| Case: Cooler Master Silencio S600 |~| Display 1 (leftmost): Eizo (unknown model) 1920x1080 IPS @ 60Hz|~| Display 2 (center): BenQ ZOWIE XL2540 1920x1080 TN @ 240Hz |~| Display 3 (rightmost): Wacom Cintiq Pro 24 3840x2160 IPS @ 60Hz 10-bit |~| OS: Windows 10 Pro (games / art) + Linux (distro: NixOS; programming and daily driver)
Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Keelan said:

My gpu is displayed in the display 2, whereas my Integrated shows as display 1. Will that cause any problems with performance? 

Why don't you just plug both monitors to the 1080?

Intel Core i9-10900X, Asus TUF X299 Mark 1, 64GB DDR4 3200MHz, Asus GTX 1080 Strix, 2TB 970 EVO Plus, 2TB SN570, 8TB HDD, DC Assassin III, Meshify 2

Old PC: Intel Xeon X5670 6c/12t @ 4.40GHz, Asus P6X58D-E, 24GB DDR3 1600MHz, Asus GTX 1080 Strix, 500GB, 250GB & 120GB SSD, 2x 4TB & 2x 2TB HDD, Fractal Define R5

PC 2: Intel Xeon E5-2690 8c/16t @ 3.3-3.8GHz, ThinkStation S30 (C602/X79), 64GB (4x 16GB) DDR3 1600MHz, Asus GeForce GTX 960 Turbo OC, 1TB Crucial MX500

PC 3: Intel Core i7-3770 4c/8t @ 4.22-4.43GHz, Asus P8Z77-V LK, 16GB DDR3 1648MHz, Asus RX 470 Strix, 1TB & 250GB Crucial MX500 and 3x 500GB HDD

Laptop: ThinkPad T440p, Intel Core i7-4800MQ 4c/8t @ 2.7-3.7GHz, 16GB DDR3 1600MHz, GeForce GT 730M (GPU: 1006MHz MEM: 1151MHz), 2TB SSD, 14" 1080p IPS, 100Wh battery

Laptop 2: ThinkPad T450, Intel Core i7-5600U 2c/4t @ 2.6-3.2GHz, 16GB DDR3 1600MHz, Intel HD 5500, 250GB SSD, 14" 900p TN, 24Wh + 72Wh batteries

Phone: Huawei Honor 9 64GB + 256GB card Watch: Motorola Moto 360 1st Gen.

General X58 Xeon/i7 discussion

Some other PC's:

Spoiler

Some of the specs of these systems might not be up to date

PC 4: Intel Xeon X5675 6c/12t @ 3.07-3.47GHz, HP 0B4Ch (X58), 12GB DDR3 1333MHz, Asus GeForce GTX 660 DC2, 240GB & 120GB SSD, 1TB HDD

PC 5: Intel Xeon W3550 @ 3.07GHz, HP (X58), 8GB DDR3, NVIDIA GeForce GT 640 (GPU: 1050MHz MEM: 1250MHz), 120GB SSD, 2TB, 1TB and 500GB HDD

PC 6: Intel Core2 Quad Q9550 @ 3.8GHz, Asus P5KC, 8GB DDR2, NVIDIA GeForce GTX 470, 120GB SSD and 500GB HDD

HTPC: Intel Core2 Quad Q6600 @ 3.0GHz, HP DC7900SFF, 8GB DDR2 800MHz, Asus Radeon HD 6570, 240GB SSD and 3TB HDD

WinXP PC: Intel Core2 Duo E6300 @ 2.33GHz, Asus P5B, 2GB DDR2 667MHz, NVIDIA GeForce 8500 GT, 32GB SSD and 80GB HDD

RetroPC: Intel Pentium 4 HT @ 3.0GHz, Gigabyte GA-8SGXLFS, 2gb DDR1, ATi Radeon 9800 Pro, 2x 40gb HDD

My first PC: Intel Celeron 333MHz, Diamond Micronics C400, 384mb RAM, Diamond Viper V550 (NVIDIA Riva TNT), 6gb and 8gb HDD

Server: 2x Intel Xeon E5420, Dell PowerEdge 2950, 32gb DDR2, ATI ES1000, 4x 146gb SAS

Dual Opteron PC: 2x 6-core AMD Opteron 2419EE, HP XW9400, 32GB DDR2, ATI Radeon 3650, 500gb HDD

Core2 Duo PC: Intel Core2 Duo E8400, HP DC7800, 4gb DDR2, NVIDIA Quadro FX1700, 1tb and 80gb HDD

Athlon XP PC: AMD Athlon XP 2400+, MSI something, 1,5gb DDR1, ATI Radeon 9200, 40gb HDD

Thinkpad: Intel Core2 Duo T7200, Lenovo Thinkpad T60, 4gb DDR2, ATI Mobility Radeon X1400, 1tb HDD

Pentium 3 PC: Intel Pentium 3 866MHz, Asus CUSL2-C, 512mb RAM, 3DFX VooDoo 3 2000 AGP

Laptop: Dell Latitude E6430, Intel Core i5-3210M, 6gb DDR3 1600MHz , Intel HD 4000, 250gb Samsung SSD 860 EVO, 1TB WD Blue HDD

Laptop: Latitude 3380, Intel Pentium Gold 4415U 2c/4t @ 2.3GHz, 8GB DDR4, Intel HD 610, 120GB SSD, 13.3" 768p TN, 56Wh battery

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
9 minutes ago, Keelan said:

Ok so I have 2 potential places to plug in my DVI. I plug my main monitor into my GPU and my second monitor into my motherboard.

OS = Windows 10

 

If you plug it into the motherboard it will use both the eGPU & the iGPU.

If you're interested in a product please download and read the manual first.

Don't forget to tag or quote in your reply if you want me to know you've answered or have another question.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, Pasi123 said:

Why don't you just plug both monitors to the 1080?

There is only one DVI slot 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
3 minutes ago, Pasi123 said:

Why don't you just plug both monitors to the 1080?

Seems he is using DVI-D for both monitors so he can't unless he gets a HDMI/Display Port to DVI cable and such... as long as he just needs a display adapter for the secondary screen there shouldn't be the need though, would only cause issues if he wanted to game on both screens at the same time, for stuff like extended desktop or watch a movie while gaming and such it'll be fine.

Personal Desktop":

CPU: Intel Core i7 10700K @5ghz |~| Cooling: bq! Dark Rock Pro 4 |~| MOBO: Gigabyte Z490UD ATX|~| RAM: 16gb DDR4 3333mhzCL16 G.Skill Trident Z |~| GPU: RX 6900XT Sapphire Nitro+ |~| PSU: Corsair TX650M 80Plus Gold |~| Boot:  SSD WD Green M.2 2280 240GB |~| Storage: 1x3TB HDD 7200rpm Seagate Barracuda + SanDisk Ultra 3D 1TB |~| Case: Fractal Design Meshify C Mini |~| Display: Toshiba UL7A 4K/60hz |~| OS: Windows 10 Pro.

Luna, the temporary Desktop:

CPU: AMD R9 7950XT  |~| Cooling: bq! Dark Rock 4 Pro |~| MOBO: Gigabyte Aorus Master |~| RAM: 32G Kingston HyperX |~| GPU: AMD Radeon RX 7900XTX (Reference) |~| PSU: Corsair HX1000 80+ Platinum |~| Windows Boot Drive: 2x 512GB (1TB total) Plextor SATA SSD (RAID0 volume) |~| Linux Boot Drive: 500GB Kingston A2000 |~| Storage: 4TB WD Black HDD |~| Case: Cooler Master Silencio S600 |~| Display 1 (leftmost): Eizo (unknown model) 1920x1080 IPS @ 60Hz|~| Display 2 (center): BenQ ZOWIE XL2540 1920x1080 TN @ 240Hz |~| Display 3 (rightmost): Wacom Cintiq Pro 24 3840x2160 IPS @ 60Hz 10-bit |~| OS: Windows 10 Pro (games / art) + Linux (distro: NixOS; programming and daily driver)
Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
4 minutes ago, Princess Cadence said:

Seems he is using DVI-D for both monitors so he can't unless he gets a HDMI/Display Port to DVI cable and such... as long as he just needs a display adapter for the secondary screen there shouldn't be the need though, would only cause issues if he wanted to game on both screens at the same time, for stuff like extended desktop or watch a movie while gaming and such it'll be fine.

Yeah I just use my second monitor for OBS and discord

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

If the main monitor is primary, there wont be an issue.

 

As far as a performance hit, I cant say. I assume the igpu is actually separate and doesn't correlate directly to cpu as far as use.

I do it for my 4th monitor I cant have  3 or more on a single gpu and still down clock at idle. My cpu's are weak so I always max them out for my normal gaming anyway.

Main RIg Corsair Air 540, I7 9900k, ASUS ROG Maximus XI Hero, G.Skill Ripjaws 3600 32GB, 3090FE, EVGA 1000G5, Acer Nitro XZ3 2560 x 1440@240hz 

 

Spare RIg Lian Li O11 AIR MINI, I7 4790K, Asus Maximus VI Extreme, G.Skill Ares 2400 32Gb, EVGA 1080ti, 1080sc 1070sc & 1060 SSC, EVGA 850GA, Acer KG251Q 1920x1080@240hz

 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×