PC doesn't output video signal

[monjessenstein]

Hey guys, I recently build a pretty cheap pc out of an old dell pc with a q6600, replacing the psu, drives, and gpu with better ones. I ended up installing w10 on it and left it for a couple of weeks, but now when I start it up I'm getting no video signal.

 

Thanks in advance!

[ricksteendam1]

3 minutes ago, monjessenstein said:

Hey guys, I recently build a pretty cheap pc out of an old dell pc with a q6600, replacing the psu, drives, and gpu with better ones. I ended up installing w10 on it and left it for a couple of weeks, but now when I start it up I'm getting no video signal.

 

Thanks in advance!

is the outputting cable connected? and/or can you try another cable?

[monjessenstein]

1 minute ago, ricksteendam1 said:

is the outputting cable connected? and/or can you try another cable?

One of the first things I checked, sadly don't have another cable lying around.

Also got this screen after removing an old hynix card, might have fixed the issue.

 

[ricksteendam1]

it looks like there is no OS installed 

[monjessenstein]

2 minutes ago, ricksteendam1 said:

it looks like there is no OS installed 

True, I disconnected the sata drives and expansion bays in combination with tryinf out different ram configs to see if that could fix the issue

 

[ricksteendam1]

2 minutes ago, monjessenstein said:

True, I disconnected the sata drives and expansion bays in combination with tryinf out different ram configs to see if that could fix the issue

 

so all of that is still not back in the pc?

[monjessenstein]

5 minutes ago, ricksteendam1 said:

so all of that is still not back in the pc?

Just did it, issue seems fixed noe, thanks for helping though!